ALD/ALE 2022 Session AF1-TuA: Characterization I

Tuesday, June 28, 2022 1:30 PM in Room Van Eyck
Tuesday Afternoon

Session Abstract Book
(314KB, May 7, 2022)
Time Period TuA Sessions | Abstract Timeline | Topic AF Sessions | Time Periods | Topics | ALD/ALE 2022 Schedule

Start Invited? Item
1:30 PM AF1-TuA-1 Reaction Mechanisms of ALD of Transition Metal Oxides from Metal Amido Complexes and Water
Giulio D'Acunto, Rainer Timm, Joachim Schnadt (Lund University)

Atomic layer deposition (ALD) is an outstanding deposition technique to deposit highly uniform thin films with atomic precision. In particular, ALD of transition metal oxide layers from metal amido complexes and water finds its way in several technological fields, including green energy devices and the semiconductor industry. These ALD reactions are believed to follow a reaction scheme based on the ligand exchange mechanism. The first half cycle of ALD of HfO2, via tetrakis­dimethylamido hafnium and water, is expressed, according to the ligand exchange scheme, by the following equation: HfL4 + nS-(OH) -> S-On-HfL4-n + nLH, where S stands for surface and L for the amido ligand of the metal precursor.

Here, the surface S is supposed to play a largely passive role, and it is that it is hydroxylated. L remains chemically unchanged during the reaction. To address whether the model is correct or not, we employed time-resolved in situ and operando ambient pressure X-ray photoelectron spectroscopy (APXPS) during the ALD of HfO2 on InAs covered by a thermal or native oxide, TiO2, and SiO2.

We find that the classic ligand exchange reaction mechanism does not describe the reaction path in any of the investigated sample systems. In particular, we find that ALD of HfO2 on SiO2 follows a bimolecular reaction mechanism based on the insertion of a β-hydride of one of the ligands in an amido complex dimer into the bond between another ligand and of the Hf ions in the dimer. As a result of its bimolecular nature, this reaction can take place only at sufficiently high coverage of physisorbed complexes on the SIO2 surface. On TiO2 we find that the early stage of the reaction is based on dissociative adsorption, followed by mono- or bi-molecular reaction paths, leading to the formation of new sets of surface species never identified in ALD reactions.

Moreover, for an easily reducible surface we find evidence of HfOx formation already during the first ALD half-cycle due to the transfer of O atoms from the surface to the metal complex. Clearly, this contradicts the passive role of the surface in standard ALD models. Interesting, in the case of InAs covered by a thermal or native oxide, this phenomenon, which lies behind the so-called self-cleaning effect, guarantees a sharp interface between the III-V material and HfO2, a prerequisite for next-generation MOSFETs.

Our results open new doors for improving devices based on ALD. Time-resolved in situ and operando APXPS allows us to follow the kinetics and mechanisms involved in ALD, in real time at second time resolution with significant benefit for the further improvement of our general understanding of ALD reactions.

1:45 PM AF1-TuA-2 An in-Vacuo X-Ray Photoelectron Spectroscopy Study of the Reaction of Trimethylaluminum With Water, Oxygen and Argon Plasma for Low Temperature Atomic Layer Deposition
LiAo Cao, Jin Li, Matthias Minjauw, Jolien Dendooven, Christophe Detavernier (Department of Solid State Sciences, Ghent University, Belgium)

Low temperature atomic layer deposition (ALD) has been drawing great research interest because of its capability to coat on heat-sensitive substrates, such as flexible devices, polymers and biological materials. As a process with widespread applications, the surface chemistry of Al2O3 ALD at low temperature is still under extensive investigation.1,2 In this work, the growth of Al2O3 using trimethylaluminum (TMA)/water and TMA/O2 plasma have been investigated with in vacuo X-ray photoelectron spectroscopy (XPS) in the temperature range from 60 to 300 °C. Samples are transferred back and forth between the ALD chamber and the XPS analytical chamber without vacuum break to analyze the surface chemical state after each reactant exposure, providing insight into the evolution of surface species.

Our results confirm that the low temperature TMA/water process undergoes an incomplete surface reaction during the water exposure (Figure S1), resulting in a low growth per cycle of 0.66 Å/cycle at 60 °C. Persistent -CH3 groups are present on the growth surface after the water exposure and its concentration increases with reducing temperature, in accordance with previous reports.1,2 In spite of the continuous presence of surface -CH3 groups during the whole process, the C impurity concentration in the film is found to be surprisingly low. XPS depth profiling showed that C only exists at the very surface region, and is not incorporated into the film (Figure S2). According to in situspectroscopic ellipsometry data, the growth at low temperature still displays a linear growth behavior (Figure S3). Our results indicate that, although the reaction during one water half cycle is incomplete at lower temperature, the next few water half cycles tend to finish the job and no carbon is built into the film. In contrast, oxygen plasma can combust all carbon ligands regardless of the surface temperature (Figure S1), boosting the growth rate to 2 Å/cycle at 60°C. To further explore the power of plasma for low temperature ALD, a three-step TMA/Ar plasma/H2O process is also investigated. The Ar plasma is found to change the Al–CH3 surface groups into an intermediate product that can react more easily with H2O to allow a more complete reaction, increasing the growth rate from 0.66 Å/cycle to 1.1 Å/cycle at 60°C while avoiding potentially damaging effects on sensitive substrates caused by the chemically active O2 plasma.

1 V. Vandalon and W.M.M. Kessels, Appl. Phys. Lett. 108, 1 (2016).

2 Z. Jin, S. Lee, S. Shin, D.S. Shin, H. Choi, and Y.S. Min, J. Phys. Chem. C 125, 21434 (2021).

View Supplemental Document (pdf)
2:00 PM AF1-TuA-3 In Vacuo Cluster Tool for Studying Reaction Mechanisms in ALD and ALE Processes
Heta-Elisa Nieminen, Mykhailo Chundak, Matti Putkonen, Mikko Ritala (University of Helsinki, Finland)

Film growth during an ALD process is solely dependent on the chemical reactions on the substrate surface. Well-behaving surface chemistry enables the key qualities which make ALD a superior thin film deposition method. In addition, surface reactions define the outcome of each process and can set critical challenges on the process development and integration. For these reasons, studying the chemical reactions in the film growth is of utmost importance to fully understand the growth process and exploit the advantages ALD has to offer. Exactly the same applies to atomic layer etching (ALE) processes.

A new cluster tool in HelsinkiALD laboratory allows reaction mechanism studies on a wide variety of process chemistries without exposing the sample to ambient atmosphere. In this tool a commercial flow-type ALD reactor is connected directly to a set of ultra-high vacuum analysis techniques so that after interrupting the process at a selected point the substrate can be transferred in vacuo straight from the ALD reactor to surface analysis. The chemical composition of the surface including reaction intermediates can be precisely investigated after each precursor pulse individually. The resulting information will be beneficial for resolving the overall ALD and ALE mechanisms.

The cluster tool contains currently x-ray photoelectron spectroscopy (XPS), hard x-ray photoelectron spectroscopy (HAXPES), ion scattering spectroscopy (ISS), Auger electron spectroscopy (AES), electron energy loss spectroscopy (EELS), low-energy electron diffraction (LEED), ultraviolet photoelectron spectroscopy (UPS), and temperature programmed desorption (TPD). The film growth can also be monitored in situ by a quartz crystal microbalance (QCM) and ellipsometer which are connected directly to the ALD chamber. As the system contains a flow-type ALD reactor, the mechanisms can be solved without compromising true ALD conditions. The system has been tested and the operation procedures optimized with TMA and H2O for depositing Al2O3 at temperatures of 150 – 300 ˚C. The state of the surface was investigated by TPD and XPS after each precursor pulse. After the initial testing with this well-known process, new ALD and ALE chemistries will be studied in detail.

Funding from the Academy of Finland by the profiling action on Matter and Materials, grant no. 318913, the Doctoral Programme in Materials Research and Nanoscience (MATRENA) and the use of ALD Center Finland research infrastructure are acknowledged. View Supplemental Document (pdf)
2:15 PM AF1-TuA-4 Watching the ALD of Pt Films in Real-Time
Esko Kokkonen (Max IV Laboratory); Mikko Kaipio, Heta-Elisa Nieminen (University of Helsinki); Foqia Rehman (Lund University); Ville Miikkulainen (Aalto University); Matti Putkonen, Mikko Ritala, Simo Huotari (University of Helsinki); Joachim Schnadt (Lund University); Samuli Urpelainen (University of Oulu)

We have used in situ and operando techniques to study the growth of Pt films on different substrates in real-time. In this study, we have focused on investigating the growth of metallic Pt on Si, Ir, and Ir oxide substrates. The precursors for this reaction were chosen as trimethyl(methylcyclopentadienyl)platinum(IV), or MeCpPtMe3 and O2 gas.

The experiments were done using the so-called ALD cell, which is an synchrotron-based ambient pressure X-ray photoelectron spectroscopy (APXPS) sample environment specifically dedicated for studies of ALD processes. The system is located on the SPECIES beamline [1] at the MAX IV Laboratory in Lund, Sweden. With a wide energy range of 30-1500 eV, the beamline offers wide measurement capabilities for both core-level XPS as well as valence band (ultraviolet photoelectron spectroscopy) UPS using surface sensitive photon energies. This setup has been recently used in several studies to gain deeper insight into different ALD processes [2, 3].

We have followed various core-levels on the surface using XPS as it was exposed to the first half-cycle with the MeCpPtMe3 precursor. Interesting effects are seen on the three different substrates. Firstly, the Pt 4f core-level shows a clear intensity increase, naturally following from the addition of Pt containing precursor onto the surface. However, an interesting finding is that for all substrates, the Pt 4f binding energy shifts during the deposition. Moreover, the shifting of the Pt 4f peaks occur at a different timescale than the saturation of the surface based on the XPS intensity. A tentative explanation could be that the Pt precursor initially attaches to the surface with a higher oxidation state, perhaps still partially attached to some of the methyl groups, which rather quickly dissociate (or combust) and are released into the gas phase. This mechanism then could be on-going while the surface is only partly covered by the Pt since saturation is not yet reached.

[1] E. Kokkonen, et al. "Upgrade of the SPECIES beamline at the MAX IV Laboratory." Journal of Synchrotron Radiation28, 2, 588-601 (2021), DOI: 10.1107/S1600577521000564
[2] G. D'Acunto, et al. "Oxygen relocation during HfO2 ALD on InAs." Faraday Discussions Accepted Manuscript (2022). DOI: 10.1039/D1FD00116G
[3] E. Kokkonen, et al. "Ambient pressure x-ray photoelectron spectroscopy setup for synchrotron-based in situ and operando atomic layer deposition research." Review of Scientific Instruments 93.1, 013905 (2022). DOI: 10.1063/5.0076993

2:30 PM AF1-TuA-5 In Situ X-Ray Studies of Lamellar Dichalcogenides Prepared by Molecular Layer Deposition and Thermal Annealing
Petros Abi Younes (CEA/LETI-University Grenoble Alpes, France); E. V. Skopin (LTM - MINATEC - CEA/LETI, France); M. Zhukush, C. Camp (Univ. Lyon, CNRS-UCB Lyon 1); N. Aubert , G. Ciatto (Synchrotron SOLEIL Beamline SIRIUS); N. Schneider (UMR-IPVF, CNRS); M. I. Richard (ESRF); N. Gauthier (CEA/LETI-University Grenoble Alpes, France); E. A. Quadrelli (Univ. Lyon, CNRS); D. Rouchon (CEA/LETI-University Grenoble Alpes, France); H. Renevier (Laboratoire des Matériaux et du Génie Physique)

Metal Dichalcogenides (MDs) have recently emerged as a class of exceptional materials with many potential applications and are receiving great attention. Among them, lamellar Titanium disulfide (TiS2) is the lightest and cheapest member of the Transition MDs(TMDs) family,[1]with a 1T-TiS2 crystallographic structure. Its electrical properties allow it to use in many fields of applications (optics, thermoelectric, and batteries).[2–5]

However, the lack of scalable fabrication methods of continuous ultra-thin films on developed surfaces, at moderate temperature, stems a sizeable bottleneck for the full deployment of these materials. Besides the conventional Atomic Layer Deposition (ALD) process, which suffers from limitations, an innovative 2-step process comprising Molecular Layer Deposition (MLD) and thermal annealing has been developed to achieve an atomically-thin synthesis of 2D TMDs MoS2 and WS2.[6,7] Interestingly, the process does not use the highly toxic H2S molecule. By using this approach we have succeeded to synthesize continuous and textured TiS2 thin films on thermal SiO2[8]. An intermediate amorphous polymer (Ti-thiolate) is deposited by MLD at low temperature (Tsub = 50°C) upon a reaction between the metal precursor (TDMAT = Ti(NMe2)4) and organic sulfide molecule (1,2-ethanedithiol). Then, the amorphous thin film undergoes a thermal annealing under hydrogenated argon flow.

Both the MLD and thermal annealing were monitored by in situ synchrotron radiation techniques, including x-ray fluorescence (XRF), x-ray reflectivity (XRR), and x-ray absorption fine structure (XAFS), at SIRIUS beamline (SOLEIL, St Aubin), and in situ ellipsometry. The main results will be presented. Importantly, both the sulfur K and Ti K fluorescence line intensities could be recorded simultaneously, allowing us to monitor simultaneously the S and Ti contents throughout the whole process and from the very early stage of the Ti-thiolate deposition. The repetitive self-limiting growth behavior during the MLD step could be demonstrated. Upon thermal annealing, the Ti-thiolate thin film transforms into lamellar TiS2 monolayers parallel to the substrate surfaces observed by Raman spectroscopy, transmission electron microscopy (TEM) and x-ray linear dichroism at the Ti K-edge. Angle-Resolved X-ray Photoelectron Spectroscopy (ARXPS) and lab-scale Hard XPS (HAXPES) show stoichiometric TiS2 in the presence of carbon.

References

[1]Nano Today2014,9,604; [2]Nano Lett.2018,18,4506; [3]Phys. Rev. B2019,99,165122; [4]Photonics Res.20186,C44; [5]Phys.Chem.Chem.Phys. 2012,14,15641; [6]Nanoscale2017,9,538; [7]JVST A.2017,35,061502. [8]Chem Mater 2022 (submitted)

2:45 PM AF1-TuA-6 Effect of O2 Plasma Exposure Time During Atomic Layer Deposition of Amorphous Gallium Oxide
Florian Maudet (Helmholtz Zentrum Berlin); Hanno Kröncke, Sourish Banerjee, Keerthana Nair, Charlotte Van Dijck (Helmholtz-Zentrum Berlin); Sven Wiesner, Jürgen Albert, Veeresh Deshpande (Helmholtz Zentrum Berlin); Catherine Dubourdieu (Helmholtz-Zentrum Berlin)

Crystalline gallium oxide is an attractive ultrawide bandgapsemiconductor, which can be intentionally donor-doped with a large range of accessible electron carrier densities. Amorphous gallium oxide, on the other hand, has been comparatively less studied although it can demonstrate benefit for applications in photovoltaics and electronics. We have investigated the ability to self-doped amorphous gallium oxide thin films grown by atomic layer deposition (ALD) to tune their electrical properties from insulating to semiconducting.

Amorphous gallium oxide (GaOx) thin films were grown at 200 °C by plasma-enhanced ALD on (100) silicon substrates from trimethylgallium Ga(CH3)3 precursor and O2 plasma. The effect of O2 plasma exposure time during ALD cycles on the optical and electrical properties was investigated with the help of in situ and ex situ spectroscopic ellipsometry and electrical characterization. The O2 plasma exposure time was varied from 1s up to 30 s. We will first discuss the regrowth of the interfacial SiOx during the plasma-enhanced ALD. We will then present the effect of the O2 plasma exposure time on the optical index, extinction coefficient, dielectric constant and leakage currents. An increase in the O2 plasma exposure time during each ALD cycle up to 30 s - well beyond the time needed to reach a constant growth per cycle - leads to a drastic decrease in the leakage current density by more than five orders of magnitude (for 30 nm films). Interestingly, a concomitant increase in the dielectric constant is observed, reaching a value of 𝜀𝑟 ∼14.2, larger than that of the single crystalline β-Ga2O3. At O2 plasma exposure times below 8 s, the presence of oxygen vacancies is evidenced with an increasing amount as the exposure time decreases. Finally, we will discuss the information gained from the analyses of in situ spectroscopic ellipsometry in the very first stages of the growth (first 10 cycles). A method was developed to unambiguously determine the thickness and optical properties of the growing oxide. We will discuss the change in thickness as a function of time for each of the four steps of the ALD cycles. The change in optical properties, determined after each step within one cycle and for all cycles, give information on the evolution of the film until a “bulk-like” gallium oxide film is reached.

Our study highlights the crucial role of O2 plasma exposure time during PEALD of amorphous gallium oxide films in the control and tuning of their electrical properties. The ability to self-doped this material can be used to design e.g. semiconducting a-GaOx channel field-effect device.

3:00 PM Invited AF1-TuA-7 Pyroelectric Calorimetry: Measuring the Time-Resolved Heat of ALD Half Reactions
Ashley R. Bielinski, Alex B.F. Martinson (Argonne National Laboratory)

In Situ characterization methods provide insight into ALD reactions as they occur.We’ve implemented pyroelectric calorimetry as an in situ technique to measure the heat evolved in ALD half reactions with unrivaled thermal and temporal resolution.On high surface area substrates like nanoparticles or metal organic frameworks, ALD has been observed to cause temperature increases greater than 10°C.The small temperature changes (<0.1 °C) predicted for planar substrates are more challenging to accurately measure.We designed custom pyroelectric calorimeters for implementation in an ALD tool with thermal and temporal resolution down to 0.1 μJ/cm2 and 50 ns.To put this in perspective, this corresponds to a temperature increase of about 10-5°C, which is less than 0.1% of the heat evolved in the reaction between trimethylaluminum (TMA) and water.The calorimeter response time is more than 104 times faster than our measurement of the reaction time of TMA on a hydroxylated alumina surface.

Analysis of time resolved heat generation in ALD reactions provides information on thermodynamics and kinetics as well as how real reactions deviate from simplified textbook examples.Experimental reaction heats can be compared with theoretical and computational predictions of the interaction between specific precursors and surface sites, showing which of the hypothetical pathways best represent reality.Additionally, pyroelectric calorimetry is orders of magnitude faster than many complementary in situ analysis techniques, providing more granular insight and subdivision of individual half reactions.

We’ve combined pyroelectric heat generation analysis with in situ spectroscopic ellipsometry in a saturation study of the prototypical reaction between TMA and water.This represents the most accurate measurement to-date of ALD reaction heats.Comparison between these parallel in situ measurements provides insight into the reaction energy as the surface saturates within a single half reaction and the time-resolved data highlights the limitations of slow water reaction kinetics.In addition to fundamental studies of ALD surface reactions, careful analysis of heat transfer due to precursor flow can provide information on precursor delivery and flow dynamics within the ALD reactor.

The development of pyroelectric calorimetry for ALD provides many opportunities for future investigations.Of particular interest are applications requiring sub monolayer detection such as precursor reactions with specific surfaces sites in area or defect selective ALD as well as time-resolved kinetics studies.

3:30 PM Break & Exhibits
Session Abstract Book
(314KB, May 7, 2022)
Time Period TuA Sessions | Abstract Timeline | Topic AF Sessions | Time Periods | Topics | ALD/ALE 2022 Schedule