ALD2020 Session EM-MoP: Emerging Materials Poster Session

Monday, June 29, 2020 5:45 PM in Room Arteveldeforum & Pedro de Gante
Monday Afternoon

Session Abstract Book
(378KB, Jul 28, 2020)
Time Period MoP Sessions | Topic EM Sessions | Time Periods | Topics | ALD2020 Schedule

EM-MoP-5 First Principles Modelling of Growth of Hybrid Organic-Inorganic Films
Arbresha Muriqi, Michael Nolan (Tyndall National Institute, Ireland)

Organic-inorganic hybrid materials are a unique class of materials with unique properties which means they are useful in flexibile devices. Molecular layer deposition (MLD) offers novel pathways for the fabrication of such hybrids by using metallic precursors and a vast range of organic precursors. To investigate and understand the mechanism of growth and stability a combination of theoretical and experimental data is needed.

In this contribution, we present a first principles investigation of the molecular mechanism of the growth of hybrid organic−inorganic thin films of aluminium alkoxides, known as ”alucones” grown by MLD. We focus on the interactions between precursors and this is explored by analyzing the MLD reaction products between the post-TMA Monomethyl-Al2O3 (Al-CH3-Al2O3) and Dimethyl-Al2O3 (Al(CH3)2-Al2O3) surface and the organic precursors ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG) and tetraethylene glycol (FEG). The energetics of the reaction of alumina with ethylene glycol (EG) and glycerol (GL) precursors are also investegated in detail to assist the interpretation of experimental findings regarding the differences in the hybrid films grown by EG and GL. The DFT calculations show that while the organic precursors can bind to the TMA fragements via formation of Al-O bonds and loss of CH4, it is most favorable for the organic precursors to lie flat and create so-called double reactions through two terminal hydroxyl groups with the surface fragments, where the terminal groups bind to Al. For EG this potentially removes all the active sites and growth will be less favourable. For GL the third hydroxyl group is available and growth can proceed. We also showed that the TMA in the next pulse reacts favourably with this OH from GL. The longer the chain length the harder it is for the organic precursor to stay straight and not create double reactions. This investigation contributes to the understanding of growth process of EG-alucones and GL-alucones at the molecular level and is valuable in supporting experimental data on hybrid film growth.

View Supplemental Document (pdf)
EM-MoP-7 Thermal Atomic Layer Deposition of Aluminum Nitride using a Liquid Aluminum Dihydride Complex and Ammonia
Jun Hwan Choi, Dong Hwan Ma, Jin Sik Kim (UP Chemical Co., Ltd., Republic of Korea); Tanzia Chowdhury, Romel Hidayat, Hye-Lee Kim, Won-Jun Lee (Sejong University, Republic of Korea); Wonyong Koh (UP Chemical Co., Ltd., Republic of Korea)

Aluminum nitride is a wide bandgap III-V compound with excellent thermal conductivity, high electrical resistivity, diffusion barrier properties, piezoelectric properties, and self-protection in oxidizing environments at high temperatures. It has been studied for various applications in electronics, optoelectronics, and microelectromechanical systems. Aluminum nitride thin films can be fabricated by physical vapor deposition, high-temperature chemical vapor deposition, and atomic layer deposition (ALD) techniques. ALD has several advantages including low process temperature, atomic-scale control of film thickness, and excellent step coverage on nanostructures. Aluminum chloride (AlCl3), trimethylaluminum (TMA), tris(dimethylamido)aluminum (TDMAA), and tris(diethylamido)aluminum(TDEAA) were investigated as the aluminum precursor, and ammonia (NH3) was used as the co-reactant. AlCl3 is a solid and needs high deposition temperatures (≥500°C). Corrosive byproducts are also a concern. TMA exhibits a very narrow ALD temperature window near 350°C, below which the growth rate is very low due to poor reactivity of NH3. Above that temperature, the TMA decomposes, resulting in the growth rate higher than monolayer growth. TDMAA and TDEAA have better reactivity with NH3, but the thermal decomposition of the precursor limits the ALD temperatures to 250°C or lower, resulting in low film densities, low crystallinity, and high oxygen concentration [1]. In this work, we prepared high-quality ALD aluminum nitride films using a liquid aluminum dihydride complex and NH3 at 300°C or higher temperatures. The deposited thin film had a composition in which the ratio of Al and N was 1: 1. Oxygen impurities were not detected by XPS after sputter etching of the surface layer. The ALD aluminum nitride of this work showed nearly 100% step coverage in the pattern with the aspect ratio of 10. The reaction of the precursor of this work with NH3 or NH2-terminated AlN surface was simulated by density functional theory (DFT) calculation and was compared with the reactions of other aluminum precursors.

References

[1] G. Liu et al., ECS Transactions, 41 (2), 219 (2011)

EM-MoP-9 Quinizarin: A Large Aromatic Molecule Ideal for Atomic Layer Deposition
Per-Anders Hansen, Ola Nilsen (University of Oslo, Norway)

Atomic layer deposition is a remarkable synthesis tool due to the vast array of materials that can be deposited and the complexity of structures that can be designed. The low temperature layer-by-layer approach even allows organic and inorganic components to be combined as hybrid or composite materials. However, for organic and hybrid materials, it is challenging to find suitable precursors with large aromatic systems that are also can be sublimed and have necessary reactivity. This is a major barrier for using organic components for dye sensitized solar cells or luminescence, visible light photochemistry, chemical sensors and organic electronics with this technique.

In this work we introduce a well known orange dye molecule, quinizarin. This molecule has a large conjugated aromatic system with strong absorption of visible light and show strong luminescence both in solution and its resulting complex together with aluminium ions. Interestingly, quinizarin also show surprisingly good properties for film deposition due to reactive –OH groups and low sublimation temperature (130 °C). Strongly coloured pink hybrid films was deposited with trimethylaluminium and quinizarin at 175 °C with a growth rate of 0.76 nm/cycle with about 15 % thickness gradient for samples space 5 cm apart along the gas stream. The low sublimation temperature, good reactivity and large conjugated system of quinizarin opens up for explorations of solid state hybrid and organic films based on this molecule along many different technological paths.

EM-MoP-10 Superconducting and Insulating Nitride-Based Thin Films Deposited by Plasma Enhanced Atomic Layer Deposition
Isabel Gonzales Diaz-Palacio, Luisa Ehmcke (Universität Hamburg, Germany); Kaline Furlan (Technische Universität Hamburg, Germany); Marc Wenskat, Wolfgang Hillert, Robert Blick, Robert Zierold (Universität Hamburg, Germany)

New concepts and materials for superconducting radio frequency (rf) systems have to be investigated to replace the bare niobium cavities, which are close to the theoretical performance limit nowadays. These novel approaches have the potential to further push the achievable accelerating fields and to reduce rf losses which in turn decrease operational costs or increase operational flexibility.

Here we report about thin film deposition of titanium nitride, niobium nitride, and mixtures of them by plasma enhanced atomic layer deposition from tetrakis(dimethylamino) titanium (TDMAT) and (t-butylimido)tris(diethylamino) niobium (TBTDEN) as metalorganic precursors. An adjustable ratio of nitrogen and hydrogen gas is used as co-reactant.

Structural and superconducting properties of the deposited thin films are characterized and optimized with respect to the deposition parameters, e.g. plasma power, plasma time, gas composition, and temperature. Specifically, in addition to the critical temperature and field, we reveal (i) a transition to an effective 2D electronic system and (ii) weak antilocalization in our titanium nitride films in low temperature magnetotransport studies proving the high quality and low impurity content.[1,2]

Furthermore, we compare the physical and structural properties of the superconducting thin films grown on insulating aluminum nitride, which has been deposited from trimethyl aluminum and a N2/H2-plasma without vacuum break, to oxygen- and hydroxyl group-terminated substrates such as Al2O3 or SiO2 coated silicon wafers.

Our experimental studies lead to new insights in the ALD growth of superconducting nitrides and might be a stepping stone to ALD-deposited superconducting-insulator multilayer structures, which are treated as one of the most promising approaches to overcome the physical limitations of bare niobium cavities.

We acknowledge financial support by the German Federal Ministry of Education and Research (BMBF) via the project SMART.

[1] Postolova et al., Sci. Rep., 2017 DOI: 10.1038/s41598-017-01753-w

[2] Gupta et al., JMMM, (2019) DOI: /10.1016/j.jmmm.2019.166094

EM-MoP-15 Low Temperature Thermal a-SiC Deposition Using Pulse CVD and ALD
Susumu Yamauchi, Makoto Fujikawa (Tokyo Electron Technology Solutions Limited, Japan); Takahiro Miyahara (TEL Technology Center, America, LLC)

Semiconductor manufacturing processes are becoming increasingly complex and miniaturized year by year in order to achieve high performance, low power consumption and low manufacturing costs. From thin films point of view, this can be translated that thin films are required to be deposited at lower temperature, with high conformality and sometimes required to have high etch selectivity to other materials.

Despite enormous number of thermal SiO2 and SiN deposition at low temperature < 450 ℃, not many thermal a-SiC deposition have been reported at low temperature. Most of SiC have been deposited at > 700 ℃ which might not be favorable to implement in manufacturing. On the other hand there are a lot of precedent reports of a-SiC deposition at low temperature which have done by plasma process. The authors agree with the usefulness of plasma enhanced deposition, but in the coming semiconductor manufacturing process with advanced scaling, there are concerns of conformality and plasma-induced damages.

Therefore, the authors have utilized thermal reaction without plasma enhancement to a-SiC thin film deposition (CVD, pulse-CVD and ALD) at low temperature. Several acetylene compounds have chosen as carbon precursor and disilane (Si2H6) has chosen as silicon precursor respectively. All of samples were deposited with CVD/ALD capable vacuum reactor. Precise process control has been established over wafer temperature, pressure and gas flow at every single process step. Detail physical characterization was carried out to study a-SiC film properties. Firstly, films were measured with SEM and ellipsometry to obtain thickness as well as deposition rate or growth per cycle (GPC). XPS measurement showed stoichiometry of deposited film and spectra were deconvoluted to analyze distribution of bond state as further research. EDX combined with TEM was also implemented to some of samples. Film density was measured with XRR. In-film hydrogen concentration was measured by HFS. Conformality of deposited film was inspected with TEM and SEM.

Thermal a-SiC was successfully deposited at ≥ 400 ℃. Typical deposition rate or GPC of pulsed CVD and ALD were 0.60 Å/cyc and 0.32 Å/cyc respectively. Film stoichiometry were Si/C/O = 51/47/2% with pulse-CVD and Si/C/O = 49/44/7% with ALD respectively. XPS peaks deconvolution for both Si2p and C1s indicated that ≥ 80% of silicon and carbon formed Si-C bond. Film density was ~ 2.3 g/cm3. Step coverage of film was confirmed with A/R = 1:3 to 1:7 trenches and which showed good conformailty. Dry etch rate was 8.2 to SiO2 and 7.8 to SiN respectively.

View Supplemental Document (pdf)

EM-MoP-16 Novel Approach for Conformal Chemical Vapor Phase Deposition of Ultra-Thin Conductive Silver Films
Sabrina Wack, Petru Lunca Popa, Noureddine Adjeroud, Renaud Leturcq (Luxembourg Institute of Science and Technology, Luxembourg)

The present work demonstrates a novel approach for the conformal deposition of ultra-thin conductive silver (Ag) films on complex substrates. Using an original multi-step plasma-enhanced approach, we demonstrate the deposition of conductive silver films with thickness down to 11 nm. Conductive ultra-thin Ag films are commonly deposited by physical vapor deposition techniques (metal evaporation or sputtering). However, these are line-of-sight methods that do not allow conformal deposition on substrate with complex morphology (e.g. trenches) [1]. Non line-of-sight methods such as the ones based on chemical vapor phase deposition (Chemical Vapor Deposition-CVD or Atomic Layer Deposition-ALD) usually produce non-electrically-conductive films for thickness below 20-50 nm due to island formation by Volmer-Weber growth mode for metal layers on oxide-based substrate [2]. Moreover, conductive ultra-thin silver films based on ALD (down to 22 nm) [3], require low-temperature deposition (below 120 ºC), with a very narrow process temperature window (about 10 ºC).

The deposition is based on Ag(fod)(PEt3) as silver precursor, and H2 plasma as reducing agent. An acceptable process temperature window (> 30 ºC), and a deposition temperature larger than 120ºC for enhanced uniformity and deposition rate have been demonstrated. In these conditions, highly uniform deposition on bent and batched samples have been performed. 20 nm thick films exhibit a resistivity down to 40 μΩ·cm. The resistivity increases up to 1.4 mΩ·cm when reducing the thickness down to 11 nm. The critical thickness as low as 11 nm is thus very close to the state-of-the-art for sputter-deposited thin films [4], and well below the 22 nm obtained with ALD [3]. The obtained Ag thin film also demonstrates a high reflectance up to 94% and a low absorbance of 3% in the infrared region for a film thickness of 36 nm, showing the high quality of the films. This quality is confirmed by morphological analysis using scanning electron microscopy and atomic force microscopy, as well as by the structural (X-ray diffraction) and chemical (energy dispersive X-ray spectroscopy) properties. This new processing approach opens a very interesting path for the use of ultra-thin silver films for electronic and optoelectronic applications.

[1] Guske et al., Optical Society of America, 20, 21 (2012)

[2] Golrokhi et al., Applied Surface Science, 364, 789–797 (2016)

[3] Kariniemi et al., Chemistry of Materials, 23, 2901 (2011)

[4] Hauder et al., Applied Physics Letters, 78, 6 (2001)

View Supplemental Document (pdf)
EM-MoP-17 When ALD Outperforms MOCVD: Direct Comparison of Epitaxial InN Films
Chih-Wei Hsu, Petro Deminskyi, Ivan Martinovic, Justinas Palisaitis, Henrik Pedersen (Linköping University, Sweden)

The successful development of III-nitride semiconductors and their alloys for light-emitting and power electronics has attracted tremendous attention over the past few decades. InN, with direct band gap of 0.7 eV and high carrier mobility, has been suggested to play a key role in extending the LED toward infrared and lifting the operating frequency of a high-electron-mobility transistor. However, the utilization of InN in device structures is rare due to the challenges of integrating high quality InN as active layers in between other matrix material.

In this work, homogeneous and epitaxial InN layers with well-controlled thickness grown on GaN and SiC by using plasma ALD is presented and compared to InN grown by conventional Metal-Organic Chemical Vapor Deposition (MOCVD). Trimethyl indium and NH3 are used as precursors in both plasma ALD and MOCVD with the main difference of it being supplied in a plasma discharge in the case of plasma ALD. The morphological and structural properties of the resulting materials are characterized by using scanning electron microscopy, atomic force microscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM).

The surface profiles and the surface roughness of InN grown by ALD are nearly identical to those of GaN and SiC. In contrast, scattered hill-rock features are observed on InN grown by MOCVD. Despite the difference in morphology, the InN grown by ALD and MOCVD have the same hexagonal wurtzite structure and is epitaxially grown on GaN and 4H-SiC with the growth direction of <0002>. The full-width-half-maximum of XRD rocking curve of InN (0002) is well-reproduced depending on the quality of underlying material; the measured values for our ALD grown InN (0002) are between 150-200 arcsecond for InN on GaN and between 20-30 arc seconds for InN on 4H-SiC. This result is better than any other reported value for InN (0002) rocking curves. The observation of interference fringes in the vicinity of InN (0002) suggests very smooth InN layer with sharp interface grown by ALD. Such features are absent in InN grown by MOCVD. The well-resolved lattice images obtained in our TEM investigation further confirm the epitaxial relationship between InN and its underlying materials.

In summary, the InN grown by ALD results in smooth and homogeneous films with good crystalline quality while the InN grown by MOCVD results in hill-rock structures after relaxation. Our results suggest that ALD is a promising growth technique that can enable the use of InN layer in optoelectronic applications.

EM-MoP-19 Solution-Based ALD Routes Towards Thin Films of Organic-Inorganic Hybrid Perovskites
Vanessa Koch, Maïssa K. S. Barr, Pascal Büttner, Ignacio Mínguez-Bacho, Dirk Döhler, Julien Bachmann (Friedrich-Alexander-University Erlangen-Nürnberg, Germany)

Organic-inorganic hybrid perovskites are not yet accessible with conventional Atomic Layer Deposition from the gas-phase (gALD). Therefore, a method to deposit such materials in a precise and controllable manner is necessary. We present two procedures to grow organic-inorganic hybrid perovskite thin films with 'solution Atomic Layer Deposition' (sALD), a technique which transfers the principles of ALD from the gas phase to liquid processing at ambient conditions. The first route entails two steps: the successful deposition of polycrystalline PbS thin films on planar and nanostructured substrates via sALD with subsequent conversion to the hybrid perovskite methylammonium iodoplumbate (methylammonium lead iodide, MAPI, CH3NH3PbI3). The second route paths the way to a direct deposition of hybrid perovskites including lead-free phases. These materials can then serve as light-absorbing layers in thin film solar cells.

EM-MoP-21 Development of ALD Copper Oxide and Al:CuxO Films
Jason Avila, Charles Eddy, Jr., Virginia Wheeler (U.S. Naval Research Laboratory)

Thin film metal oxide semiconductors that exhibit p-type conductivity are advantageous for a wide variety of applications, such as photovoltaics and high power electronics. Copper containing materials, like Cu2O and CuAlO2, are promising p-type oxides due to O-Cu-O structure facilitating hole carriers through copper vacancies.1,2 Additionally, the wide bandgap of CuAlO2 (3.5 eV) results in ~70% transparency of visible light1, which is useful for transparent conductors. ALD of Cu2O or CuAlO2 would allow conformal thin films on a variety of substrate materials and complex architectures required for many new applications. There are few studies demonstrating the growth of either Cu2Oor CuAlO2 by ALD,2 and even fewer showing the systematic effect of digitally doping of Cu2O films with increasing amounts of Al on film quality. In this work, the chemical, structural, and electrical properties of ALD grown Al:CuO films will be assessed as a function of increasing amounts of Al.

Due to its relatively high growth rate, deposited crystallinity,3 and stoichiometric modularity, Bis(dimethylamino-2-propoxy)copper(II) (or Cudmap) was used with ozone to deposit CuO films at 150°C CuO films were digitally doped with individual Al2O3 ­cycles using trimethylaluminum (TMA) and ozone. The ratio of Al2O3 to CuO cycles was varied from 2-50 cy%. Initial films indicate that only 2 cy% of Al is needed to reach stoichiometric 1:1 ratio with Cu, and dramatically changes the properties of the film resulting in increased growth rate and reduced film crystallinity. Furthermore, XPS analysis of a 50 cy% films, indicates that TMA reduces the CuO film to a mixed Cu­­+/Cu2+ oxidation state.

The influence of crystallinity on the electrical properties of Al:CuO films was studied through post-deposition annealing. Initially, CuO films were annealed to determine the parameters required to crystallize and reduce CuO to Cu2O, the necessary stoichiometry for CuAlO2 films. Oxygen pressure was crucial to attaining continuous films with the required crystalline structure and phase, while temperature and time were less impactful. Specifically, a low pressure of 0.1 mTorr of O2 is required to achieve crystalline Cu2O from the as-deposited CuO ALD film. Using the established optimized annealing conditions, the effect of Al incorporation on the final film crystallinity, morphology and electrical properties was assessed as a means towards realizing usable p-type oxide films for optoelectronic devices.

1) Yanagi, H.; et.al.J. of Electroceram.2000, 4, 407.

2) Tripathi, T. S.; Karppinen, M. Adv. Mater. Inter.2017, 1700300.

3) Iivonen, T.; et.al.. J. Vac. Sci. & Tech. A2016, 34, 01A109.

EM-MoP-23 Photoactive Hybrid Thin Films by Molecular Layer Deposition
Melania Rogowska, Per-Anders Hansen (University of Oslo, Norway); Håkon Valen (Nordic Institute of Dental Materials, Norway); Ola Nilsen (University of Oslo, Norway)

Photoreactive surfaces can be utilized in solar cells, light sensors and photocatalytic processes for water purification systems or antimicrobial coatings. One of the promising method to design such photoactive materials is to extend the light absorption towards the visible light region by combining inorganic transition metal clusters with highly aromatic organic molecules. Molecular layer deposition (MLD) is a suitable tool to fabricate such structures with an excellent thickness control.

In this study we have produced organic-inorganic hybrid materials with photoactive properties based on 2,6-naphthalenedicarboxylic acid as the absorber and organic building unit, and Ti, Zr, Hf or Y as metal centre. We characterized the growth dynamics and physicochemical properties of our surfaces with in-situ QCM, FTIR, UV-Vis and photoluminescence (PL) measurements. The films are amorphous as deposited and prove strong photoactivity and photoluminescence. The growth dynamics

is dependent on the choice of a metal and our current focus is in identifying the effect of chemistry on the growth and material properties.

In all deposited systems, the strong near-UV absorption of the organic precursor is broadened and

red-shifted when the organic molecule binds to a metal atom. The PL characterization proves that the presence of different metal clusters change the optical emission of hybrid systems and moreover

Ti-O clusters quench the emission from the organic linker. It was also found that the emission of light from the photoactive materials decreases upon UVC exposure, showing photobleaching effect.

EM-MoP-24 Inducing Conductivity into Parylene C by Vapor Phase Infiltration of In2O3
Oksana Iurkevich, Eugeny Modin (CIC nanoGUNE BRTA, Spain); Iva Šarić, Robert Peter, Mladen Petravić (University of Rijeka, Croatia); Mato Knez (CIC nanoGUNE BRTA, Spain)

The development of material for future electronics does not only rely on increasing the computational efficiency, but also on including completely novel functionalities, such as foldability. Hybrid organic-inorganic materials are especially promising for this task as they may combine the properties of inorganics, such as electronic conductivity, with the flexibility of organic polymers.

A hybrid system, consisting of a semiconducting material blended with a polymer matrix, may be beneficial over conventional approaches that rely on coatings and well-defined interfaces between the two materials. Vapor phase infiltration (VPI) meets this challenge by allowing diffusion of a precursor into the bulk of a soft substrate. VPI on polymer substrates leads to the formation of a gradient hybrid layer with altering density and smooth transition from the bulk polymer to the inorganic thin film on the surface (Fig.1). This gradient layer can compensate mechanical stress and suppress crack formation upon bending, thus preventing the loss of electrical conductivity upon bending, folding, or stretching.

In this work, we developed a VPI process of indium oxide by exposure of parylene C to alternating pulses of trimethylindium and water precursors. Parylene C is a CVD-deposited polymer with high thermal tolerance. The infiltration process was performed in the temperature range from 130 to 210oC. Despite the film growth even at low temperatures, the sheet resistance of those structures remained high at 130oC. Substitution of the water with hydrogen peroxide allowed to decrease the sheet resistance value by five orders of magnitude and highlighted the importance of the oxygen source choice. For higher infiltration temperatures this difference decreased to one order of magnitude for water and H2O2 precursors. However, the precursor choice made a significant impact on the infiltration depth, chemical distribution of the elements, and crystallinity. Moreover, transmission electron microscopy showed that in the case of hydrogen peroxide, there is no thin inorganic film growing on top of the surface, but the whole surface remained hybrid. Such functionalization of the dielectric polymer with electronically conductive material is a promising approach for the development of novel foldable organic electronic devices.

This work is funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement №765378.

View Supplemental Document (pdf)
EM-MoP-26 Solution Atomic Layer Deposition of Cu-BDC SURMOF Thin Films
Maïssa K. S. Barr, Soheila Nadiri (Friedrich-Alexander University of Erlangen-Nürnberg, Germany); Dong-Hui Chen, Peter Weidler (Karlsruhe Institute of Technology, Germany); Helmut Baumgart (Old Dominion University); Julien Bachmann (Friedrich-Alexander-University Erlangen-Nürnberg, Germany); Engelbert Redel (Karlsruhe Institute of Technology, Germany)

Transferring the principles of atomic layer deposition (ALD), known with gaseous precursors, to precursors dissolved in a liquid generalizes established methods such as the ‘layer by layer’ growth or the ‘successive ion layer adsorption and reaction’ (SILAR). This 'solution ALD' (sALD) shares the fundamental properties of standard ‘gas ALD’ (gALD), especially the self-limiting growth and the ability to coat deep pores.

It is particularly interesting in the case of ionic solid or polymers. In the specific case of metal-organic fameworks (MOF), the use of sALD appears as a method of choice. Indeed the usual processes such as spray coating, spin coating and dip coating do not offer a control at the scale of individual units (molecules or ions). So far, only few processes from the gas phase, including ALD, have been reported due to the competition of the growth and the thermal decomposition of the MOF at elevated temperature under vacuum.

In the following the deposition of a surface-anchored metal-organic framework (SURMOF) is described. The optimization of the deposition conditions is studied for the growth of Cu-BDC by sALD. Copper acetate and benzene-1,4-dicarboxylic acid (BDC) are used as the copper source and the linker, respectively. The purge and pulse durations are varied independently and demonstrate the self-limiting feature of this sALD reaction. The morphology of the films is observed by scanning electron microscopy and atomic force microscopy. The films are crystalline MOF is identified by x-ray diffraction and TOF-SIMS. The thin SURMOF films obtained by sALD exhibit a quality superior to layers obtained by spray and dip coating: in particular, the films are continuous and uniform after only 10 cycles already.

EM-MoP-29 ALD-Grown Gallium Oxide Thin Films with Properties Close to Bulk Wafers
Elham Rafie Borujeny, Kenneth Cadien (University of Alberta, Canada)

Gallium oxide is a wide bandgap material (Eg ~ 4.6eV - 5.2eV) with a large breakdown field (~ 8MV/cm). These properties make gallium oxide a promising material for power semiconductor applications [1]. A comprehensive study of gallium oxide thin films grown by ALD is presented in this work, and ~40nm-thin films with properties close to bulk gallium oxide wafers are obtained.

Gallium oxide films were deposited on C-plane sapphire, p-Si (100), n-Si (111) and p-Si (110) wafers as well as glass slides using a Kurt J. Lesker ALD 150-LX™ system equipped with a remote inductively coupled plasma (ICP) source. Depositions were done at a substrate temperature range of 50°C to 450°C. In-situ ellipsometry measurements were performed and the results were used to predict the quality of the films at different deposition conditions. 1-D and 2-D XRD patterns were collected to study crystallinity of the films. AFM measurements were performed to study surface morphology of the films. Electrical resistivity of the films was measured using van der Pauw method. Characterization results confirmed robustness of ellipsometry as a fast, non-contact and non-destructive technique for predicting structure and property of the films, which is especially beneficial for highly resistive thin films of emerging wide bandgap materials such as gallium oxide.

As a result of this work, low temperature gallium oxide thin films with resistivity and breakdown voltage values close to bulk wafers have been successfully deposited by ALD. An example cross section TEM image of a film grown at 275°C is shown in the attachment to present the crystalline quality of the film both at the interface and throughout the bulk of the film.

References:

[1] M. A. Mastro, A. Kuramata, J. Calkins, J. Kim, F. Ren, and S. J. Pearton, "Opportunities and Future Directions for Ga2O3", ECS J. Solid State Sci. Technol. 2017, volume 6, issue 5, P356-P359, doi: 10.1149/2.0031707jss

View Supplemental Document (pdf)
EM-MoP-30 Crystalline GaN Film Growth at a Thermal Budget Approaching 100oC Using Hollow-Cathode Plasma-Assisted Atomic Layer Deposition
Deepa Shukla, Adnan Mohammad, Saidjafarzoda Ilhom, Necmi Biyikli (University of Connecticut)

The III-nitride wide bandgap semiconductor material family features attractive properties to be integrated with low-temperature materials such as transparent glass and polymeric flexible substrates. Towards such an integration, our plasma-assisted atomic layer deposition (PA-ALD) efforts concentrated on achieving a minimal deposition thermal budget not exceeding 200 oC. Our previous efforts demonstrated the effectiveness of the hollow-cathode plasma source in obtaining relatively low-impurity GaN layers at a substrate temperature of 200 oC. Using our customized hollow-cathode PA-ALD (HCPA-ALD) reactor, in this work, we achieved crystalline hexagonal GaN films at growth temperatures as low as 120 oC. To the best of our knowledge, this corresponds to the lowest growth temperature for crystalline GaN films via remote-plasma ALD.

GaN thin films were successfully deposited using HCPA-ALD on Si(100) substrates using triethylgallium (TEG) and Ar/N2/H2 or N2/H2 plasma as metal precursor and nitrogen co-reactant, respectively. Saturation curve study revealed an optimal plasma power of 150W and plasma duration of 20 s. The temperature range for the saturation experiments was 100 – 240 °C and each growth parameter variation was carried out for 10-cycle sub-runs. The sensitivity of the multi-wavelength in-situ ellipsometer has provided sufficient resolution to capture the subtle changes in the growth-per-cycle (GPC) parameter. The temperature variation of the GPC demonstrates a slight increase with temperature till 200 oC, where after it reaches a plateau, indicating a possible ALD temperature window for the TEG-N2/H2 surface growth reaction. Structural, chemical, and optical characterizations were performed to evaluate and compare film quality of GaN films grown at different substrate temperatures. The influence of plasma gas composition on film crystallinity has been characterized using grazing-incidence x-ray diffraction (GIXRD) and it was observed that the absence of Ar plasma during the growth process enhances the preferred (002) crystalline orientation by suppressing (100) & (001) neighbor peaks. In addition, we found that the optimal N2/H2 flow ratio is 1:2, reaching the highest (002) peak intensity. High-resolution XPS measurements revealed near-ideal stoichiometry with relatively low oxygen incorporation and below-deteccarbon content lower than the XPS-detection limits. High-resolution TEM imaging confirms the polycrystalline structure along with the crystal planes within the film grown at 120 oC. A detailed analysis comparing previously published reports on PA-ALD grown GaN will be presented.

View Supplemental Document (pdf)
Session Abstract Book
(378KB, Jul 28, 2020)
Time Period MoP Sessions | Topic EM Sessions | Time Periods | Topics | ALD2020 Schedule