ICMCTF 2024 Thursday Afternoon

Collaborative Intelligence in Thin Film Research for Clean Energy Technologies

Discovery and Design of a New Functional Amorphous Nitride: Y-W-N

Deposition of Highly Crystalline AlScN Films Using Synchronized HiPIMS – From Combinatorial Screening to Piezoelectric Devices

Advancing Metallic Glasses for Biomedical Applications: A Comprehensive Study on CuAgZr Alloys Using Combinatorial Synthesis, High-Throughput Characterization, and Machine Learning

Accelerating Materials Discovery by Combining Combinatorial Synthesis of Thin-Film Libraries, High-Throughput Characterization and Data Science

Autonomous Sputter Synthesis and Data Management for Nitride Thin Films

Tuning Oxidation Resistance and Mechanical Properties of Diborides by Transition Metal Alloying Deposited by Combination of Magnetron Sputtering and Cathodic ARC Evaporation

Coherent Coexistence of Crystalline Phases Enabled by Planar Defect Formation in Annealed V_1-XW_XB_2-δFilms

Powder Synthesis and Application of Atmospheric Plasma Spraying Zirconium Diboride Coating

Annealing Twins in Sputtered Tantalum Boride Coatings

Constitution, Microstructure and Properties of Magnetron Sputtered CrB₂-TiB₂ and CrB₂-ZrB₂ Thin Films

Fracture Characteristics of Si Containing Ternary and Quaternary Transition Metal Diborides

Yttrium Tetraboride Thin Films – Thermal Evolution of the Nanostructure and Mechanical Properties

AFM-SEM Imaging for TEM Grid Mounted Nanomaterials

Sputtering onto Liquids: Towards the Synthesis of Ultra-Fine Nanoparticles

Superhard Hexagonal Tib₂/Hf Single Crystal Superlattices for Toughness Enhancement

Study on Improving the Performance of Zinc Oxide Piezoelectric Pressure Sensor by Doping Vanadium

Glancing Deposited Wide Band Gap Zirconia Nanohelical Metamaterial Platforms:Unveiling Broad-Band UV-Active Chirality

Mass-Production of Ultra-Sensitive 2d Electronic Biosensors via Roll-to-Roll Sputtering and Laser Patterning

Corrosion Risk Analysis of CoCrMo alloy as a Function of Microstructure: Biomedical Applications

Comparative Study of Composite Coatings on Magnesium for Biomedical Devices

Laser-Induced Graphene Coatings on Polymers for Biomedical Devices

Microfluidic Device for the Isolation, Detection, and Purification of Exosomes Based on Metallic Nanostructure Arrays

Strategies for Low Temperature Reactive Deposition of Crystalline TiO₂ Thin Films

Plasma Dynamics of Individual HiPIMS Pulses Investigated by High-Frame-Rate Camera

PowerFlex 500CG: A New HiPIMS Machine for Microtools Coating

Toward Decoupling the Effects of Kinetic and Potential Ion Energies: Ion Flux Dependent Structural Properties of Thin (V,Al)N Films Deposited by Pulsed Filtered Cathodic Arc

Tough Plasmonic Titanium Nitride Films Deposited by High Power Impulse Magnetron Sputtering

Two-Dimensional Ruddlesden–Popper Phase of B-site substituted Ca_n-1Mn_n-3Nb3O_3n+12- (n=4,5,6) Perovskite Nanosheets Integration with Chlorella vulgaris for Electrochemical Water Splitting

Multifunctional Materials for Emerging Technologies

Enhanced Photoelectrochemical Water Splitting on ZnCo₂O₄ Electrodes in Chloroplasts Driven by Spin Injection

Piezoelectricity-Assisted Photocatalyst of BiOBr-Based Composites on a Flexible Substrate

Hydrothermal Synthesis of p-Ag₂O/n-BaTiO₃ Heterojunctions for Visible-light Photocatalytic Application

Advances in Piezo-Photothermal Effect Enhanced Photocatalytic Activities of Heterostructure Composites

Photoelectrochemical Properties of Chlorophyll Coating on Cu₂O Photocatalyst by Mediating Charge Transfer Characteristic

Ligand Modified Bimetallic Metal-Organic Frameworks Electrocatalysts for Urea Oxidation Reaction