ICMCTF 2024 Monday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, May 20, 2024
1:40 PM 2:40 PM 3:40 PM 4:40 PM
CM2-1-MoA
Micromechanics During Hydrogen Charging and the Study of Hydrogen Barrier Coatings
The Micromechanical Behavior of Magnetron Sputtered TiN/Nb Multilayers
Deformation Behaviour and Plasticity in FCC-BCC High Entropy Alloy Nanolaminate Structures
Characterisation of Hydrogen in Coatings and Thin Films Using Atom Probe and TDMS
BREAK
Analysis of Stress Field in Nickel Borides Layer Produced by Vickers Indentation Tests in Cross Section: Finite Element Method
IA1-MoA
PVD Thin Film Coating Materials in Semiconductors and Impact of CHIPS Act
Production and Characterization of Coating-Substrate Combinations for Ceramic Data Storage Media
Microstructure Tuning of MXene (Ti3C2Tx) Systems for Device Applications
Decorative Coatings in Watch Making Industry: From Laboratory to Industry
BREAK
Real-Time Particle Detection for Enhanced Coating Deposition Processes
Microscopic Characterization of Optical Properties and Film Thickness Using Imaging Spectroscopic Ellipsometry
Plasma PVD by Small Spiral Ta Hollow Cathode
Improvement of Surface Adhesion of Fluoropolymer Using Linear Ion Beam Source
MA2-1-MoA
Oxygen Permeability, Degradation and Failure Analysis Formulated by Artificial Intelligence of Environmental Barrier Coatings under Adverse Environments Environments
Effect of Thermal Barrier Coatings on the Thermal Management of a Jet Engine Combustion Chamber
Elevated Temperature Micro-Scale Impact Testing of Thermal Barrier Coatings for Erosion Simulation
Influence of Coating Variables on the Steam Oxidation of Modified Si / Yb2Si2O7 Environmental Barrier Coatings
Effect of Pre-Oxidation on the Growth of Thermally Grown Oxide and High Temperature Durability of Thermal Barrier Coatings
BREAK
Correlative Microscopy and AI-assisted Image Analysis Synergetic Approach on High Temperature Applications Coatings
Characterization of SiO2 Thermally Grown Oxide Kinetics and Stress Evolution of EBCs with Al-Containing Dopants
Promising SiOxNyCz Coatings for Glass Protection in Aggressive Chemical Media
Influence of Gas Composition on the Growth Behavior of CVD Processed HfC Coatings for Ultra-high Temperature Application
Tribological Insights of Nickel – and Cobalt – Based Alloys in Extreme Conditions
MA3-2-MoA
In Operando Studies of Hard Coatings Using High-Energy X-Ray Diffraction
Exploring High Temperature Decomposition and Age Hardening in Wurtzite Ti1-XAlXNY (X=0.75 to 0.98, Y=0.82 to 1) Thin Films
Enhancing the Thermal Stability of V0.25Al0.25N0.50 by Oxygen Incorporation
Interplay of Substrate Template Effects and Bias Voltage Regarding the Microstructure of Cathodic Arc Evaporated fcc-Ti0.5Al0.5N Coatings
Decomposition of Single Crystal Hf1-XAlXN Films Grown at High Temperatures and the Effect on Mechanical Properties
BREAK
Influence of the Thickness of TiAlSiN on the Thermal Properties as Input Parameter for FEM–Simulation
Non-Reactive Magnetron Sputtering of Ti-Al-N Coatings
nc-Sic/a-C Coating for Industrial Applications
Synthesis and Investigation of Crystalline (Ta,Al)B2 and AlB2 Thin Films
Tribocorrosion and Biocompatibility Analysis of Carbide-derived Carbon (CDC) Surface Modification for Hip Implants
MB1-MoA
Improvements to Multilayer Dielectric Coatings to Enable Internal Confinement Fusion at the National Ignition Facility (NIF)
Investigating Thin Ito Films for Light Detectors at Cryogenic Temperatures
Key Success Factor of Solid-Phase Crystallization Through Postannealing Under Atmospheric Conditions on Amorphous Conductive W-Doped In2O3 Ultra-Thin Films with Thicknesses of Less Than 10 Nm
BREAK
Multifunctional Bragg-Reflector-Enhanced Electrochromic Devices with Adjustable Optical Performance
Quantitative Strong Optical Nearfield Enhancement by Coupling Bloch Surface Wave Packet and Localized Surface Plasmon of Aunp for Surface-Enhanced Raman Spectroscopy
Strongly Thermochromic VO2-Based Smart Coatings for Room-Temperature Applications Prepared on Glass
Nanostructured Metal Thin Films with Enhanced Mechano-Optical Properties for Solar Radiation Isolation
MC1-2-MoA
Thermally Sprayed Hardmetal Coatings - Strategies for Replacement of WC-Co(Cr)
Tribological Properties of Metallic Surfaces Obtained by 3D Additive Manufacturing (Laser Metal Deposition Process), for Repairing Applications
Improved Anti-Friction of Diamond-Like Carbon Incorporating Titanium
Tribological Study of Magnetron Spurrered W-S-(C) Thin Films Sliding Against Aluminium at High Temperatures
BREAK
Understanding the Tribological Mechanisms of TiO2 Thin Layers: The Role of Composition and Structure of the Oxide Layer on Wear in Relation to Color Variation
Tribocorrosion Behaviours of TiZrNbTaFeC High Entropy Carbide Coatings by Superimposed HiPIMS and MF System
Friction and Wear of a-C:H and a-C:H:Si Coatings Sliding Against Different Counterpart Materials Under Dry and Moist Environments
Evaluation of the Sliding Wear Performance of Binary CrN and Nanocomposite CrSiCN Coatings in Arctic Environments
TS1-2-MoA
Effect of Atomic Layer Deposited Films on Three-Dimensional Electrodes for Lithium-Ion Batteries
Effects of Additives on Electrochemical Performance of Sodium Ion Batteries
Effect of SiOx/RGO via Phosphorus Doping as Anode Materials for Lithium-Ion Batteries
The Research of Different Pre-Lithiation Methods to Enhance Coulombic Efficiency of SnO2 Modified TiO2 as Anode Material in Lithium-Ion Battery
Study on the Characteristics of Garnet-Type Solid Electrolytes in Lithium Metal Solid-State Batteries with Multilayer Interfaces
BREAK
Investigation of Y-doped Li7La3Zr2O12(Y-LLZO) Coatings by Colloidal Coating Process for the Electrolyte of all Solid-state Battery
Technological and Economical Aspects of Precious Metal Sputtering on Full-Size PEM Electrolyzer Components
Sessions | Time Periods | Topics | Schedule Overview