ICMCTF2015 Monday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Monday, April 20, 2015 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | 5:30 PM | ||||||||||
| B2-2 |
The Initial Stages of sp2-BN Thin Film Growth by Chemical Vapor Deposition
|
Functionalization Of Aluminium Nitride Thin Films And Coatings
|
Oxidation Resistance and Mechanical Properties of Al-rich Nanolamellar Ti0.05Al0.95N Coatings Prepared by CVD
|
Wear Properties of CVD <001>Textured α - Al2O3 in Different Cutting Conditions in Stainless SteelL
|
Deposition of Diamond Coating on Fe-Based Substrates with Al and Al/AlN Interlayers
|
New Type of BN, AlBN Films Prepared by Synergetic Deposition Processes using Laser and Plasma: the Nanostructures, Properties and Growth Mechanisms
|
Low Temperature Plasma Deposited Silicon Oxycarbide Films using Organosilicon for Polycarbonate Glazing
|
|||||||
| B3 |
Influence of the Acetylene Precursor Dilution with Argon on the Microstructure, Mechanical and Tribological Properties of a-C:H Films Deposited by Modified Pulsed-DC PECVD Method
|
Investigation of Corrosion and Adhesion Property of Diamond-like-carbon andNitrogen Doped Diamond –Like- Carbon on Ti-6Al-4V
|
Diamond-like Amorphous Carbon Layer Deposited by Inductively Coupled Plasma System for Next Generation Dry Etching Hard Mask
|
Hardness, Wettability and Electrical Conductivity of Hydrogenated Carbon Coatings Deposited by a Plasma Beam Source
|
Development of Si-Containing DLC (DLC-Si) Coatings for Automobile Application
|
Sputtering-based Routes for High-rate Synthesis of Dense and Hard Amorphous Carbon Thin Films
|
Friction and Wear Performance of Multilayered a-C:H:Al Coatings
|
DLC Coatings with its Unique Properties and its use in Multiple Market Segments
|
Thick DLC Deposition by MF-AC PECVD Process
|
Site-selective Coating of Carbon Protective Layer on Sub-micron Trenches Using Plasma CVD
|
Effects of Normal and Shear Stresses in Rolling and Mixed Mode Contact on the Wear and Delamination of a WC/a-C:H Tribological Coating
|
|||
| C4-2 |
Surface Polarity Effects and New Hydrogen-related Complexes Observed in the High-resolution Luminescence from ZnO
|
Porous Silicon Buffer Layer Effect on ZnO Pyroelectricity
|
Electronic Band Structure Engineering of Highly Mismatched ZnO1-xTex Alloy Synthesized by Pulsed-Laser Deposition
|
Solar Selective Coatings for High Temperature Concentrating Solar Power: Design, Deposition and Ageing Behaviour Characterization
|
The Origin of In Solution-processable Bilayer Organometal Halide Hybrid Solar Cells
|
LiFePO4-xNy Thin Film Electrodes Coated on Carbon Fiber Modified Current Collectors for Pseudocapacitors
|
Structural and Photo-electric Properties of Cuprous Oxide (Cu2O) Thin Films Prepared by Ion-beam-assisted Deposition (IBAD)
|
|||||||
| E2-2 |
Electrical Resistance Response of Environmental Barrier Coated, Melt Infiltrated SiC/SiC CMCs Subjected to Tensile Loading Under High Heat-flux Thermal Gradient Conditions
|
Room Temperature Viscoplasticity of Nanocrystalline Nickel Thin Films
|
Orientation Dependent Mechanical Properties Of Metal-ceramic Nanolaminates
|
Time and Temperature Dependence of Viscoelastic Stress Relaxation in Al and Al Alloy Thin Films
|
Determination of Intrinsic Stresses in Coatings by Multi-axial Indentation
|
Microstructure-scale Measurements and Simulations of Surface Deformation in Columnar Tantalum Multicrystals
|
Measurement of Fracture Toughness in Thin Films by the Indentation Pillar Splitting Tests: Developments and Limitations
|
Interfacial Structure Effects on the Mechanical Behavior of Layered Nanocomposites
|
Numerical and Experimental Evaluation of Critical Variables for Multilayer Coatings Failure under Indentation Loads
|
Investigation on Plastic Behavior of HPPMS CrN, AlN and CrN/AlN-Multilayer Coatings using Finite Element Simulation and Nanoindentation
|
||||
| F1 |
Growth and Characterization of Heteroepitaxial III-N Semiconductor Films using Atomic Layer Epitaxy
|
Fast Rate and High Efficiency Cluster-assisted Epitaxy by Mesoplasma CVD
|
Synthesis and Characterization of Zeolite Y Coating on Mild Steel
|
Synthesis of Nanotwins in Low and High Stacking Fault Energy Materials
|
Novel Approaches to Plasma Processing of Carbon-based Nanomaterials
|
Prospects of the Physical Vapor Deposition Synthesis of 2D Materials
|
A Facile One-step Route of Synthesizing α-type MnO2/rGO Nanocomposites as Anode Materials for Lithium-ion Batteries
|
Photoelectric Properties of Orthorhombic and Zinc Blende Phase SnS Nanocrystals by a Facile Colloidal Synthesis Method
|
ZnO Nano-trees Active Layers as Heavy Hydrocarbon Sensors: from Material Synthesis to Electrical and Gas Sensing Properties
|
Hybrid Processing Method for Fabrication for Nanocomposite Nacre-Like Materials
|
The Electric Conductivity of Carbon Film with Top Surface Graphene Nanocrystallite Induced by Low Energy Electron Irradiation
|
|||
| TS4 |
The Method to Growth of Porous Graphene by Chemical Vapor Deposition and the Application of NO2 Gas Sensor and the Food Additives Molecules
|
Nucleation and Growth of Sputtered Two-Dimensional Transition Metal Dichacogenides
|
Phonon Transport in Graphene: Graphene Applications in Thermal Coatings
|
Orientation-Dependent Binding Energy of Graphene on the Pd(111) Surface
|
Characterization and Potential Gas Sorption Applications of Nanoporous Spongy Graphene Synthesized by Wet Chemical Reduction and Freeze Drying
|
Graphene Content-Sliding Speed Relation in the Ni-Graphene Nanocomposites Produced by Pulse Electrodeposition
|
Graphene as a Protective Coating and Superior Lubricant for Electrical Contacts
|
Three-Dimensional Textured Graphene Bioelectronics
|
Layer-by-Layer Thin Film Based on Reduced Graphene Oxide: A Surface Coating That Can Be Antiseptized within Minutes of Solar Exposure
|
|||||
| TS5 |
Insights from Modeling of Pulse Power for Control of Deposition and Surface Modification
|
2D and 3D Modelling of HiPIMS Plasma and Transport
|
Direction and Sub-structures of Ionization Zones in DC Magnetron Sputtering
|
Plasma Analysis of Inductively Coupled Impulse Sputtering by Investigation of Cu, Ti and Ni Species
|
Investigation of Gaseous By-products of Interaction of In-liquid Plasmas with Al during Plasma Electrolytic Oxidation
|
Non-conventional Plasma and Sheath Diagnostics Related to Process Parameters
|
Plasma Plume Characterization in Pulsed Laser Deposition of Ultra-thin Boron Nitride Films
|
Transient Analysis and Modeling for Diagnostic of Pulsed Bipolar Plasma Electrolytic Oxidation Process
|
Investigation of Plasma Nitriding Process by Absorption Spectroscopy
|
|||||