ICMCTF2012 Tuesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, April 24, 2012 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:50 PM | 2:50 PM | 3:50 PM | 4:50 PM | |||||||||
| A2-2 |
Process and Equipment for Advanced Thermal Barrier Coating Systems
|
Bond Coat Cavitation under CMAS-Infiltrated TBCs
|
Assessing the Delamination Behavior of CMAS Infiltrated TBCs under a Thermal Gradient
|
CMAS infiltration of YSZ thermal barrier coatings and potential protection measures
|
Overview of Environmental Barrier Coatings for Ceramic Matrix Composites
|
Progress In Depositing Solution Precursor Plasma Spray Thermal Barrier Coatings
|
Thermoelastic characteristics in thermal barrier coatings with graded layer between the top and bond coats
|
Stability of Silicates for Environmental Barrier Coatings
|
||||
| B4-1 |
Epitaxial growth of sputtered TiO2 films on α-Al2O3
|
Cu-dependent thermal transformations in hard Al-Cu-O coatings
|
Multicomponent nanostructured coatings with high thermal stability, corrosion-, oxidation resistance, and improved lubrication
|
Influence of residual stresses on the spinodal decomposition of metastable Ti1-xAlxN coatings
|
In-situ small angle X-ray scattering and phase field study on the microstructural evolution at isothermal annealing of TiAlN thin films
|
Towards an Improved Stylus Geometry for the Scratch Test and Superficial Rockwell Hardness
|
Surface Characterization of Optimized TiSiN Coating Deposited Via A Combination of DC and RF Magnetron Sputtering
|
Surface Analysis of TiAlON and CrAlN Coatings Deposited by Means of HPPMS
|
Nanoprobe measurements of anisotropy in thin-film nanocrystalline coatings
|
TaSiN Thin Films: Si Influence on the Optical and Electrical Properties
|
||
| B7-2 |
The effect of nitrogen content on stability and elastic properties of TiAlN studied by ab initio calculations and combinatorial reactive magnetron sputtering
|
First principle molecular dynamics simulations of high temperature properties in transition metal nitrides
|
Simulating the slow structural evolution of materials using Accelerated Molecular Dynamics
|
Stabilization of cubic AlN in TiN/AlN and CrN/AlN bi-layer systems by combined FEM and ab initio analysis
|
Structural and elastic properties of polycrystalline Al1-xCrxN alloys : multiscale computations versus experiments
|
Theoretical spectroscopy investigation of hard TiN/SiNx interfaces
|
Elasticity in TiAlN alloys: the significant elastic anisotropy and the dependence on the SQS model
|
Improving thermal stability of hard coating films via a concept of multicomponent alloying.
|
Packing structure and optical properties of functionalized pentacene
|
|||
| E3-2/G2-2 |
In situ tribology of cold spray-deposited pure aluminum and Al-Al2O3 composite coatings
|
Thermal Spray Lubricious Oxide Coatings
|
High temperature abrasive systems
|
Customized Surface Technology for Innovative Automotive and Industrial Products
|
Ultra-fast Synthesis of Superhard Borides: A Paradigm Shift in Surface Engineering for Tooling and Automotive Applications
|
A study on tribological behavior of arc-coated Ti-Al-N films on AISI 4340 alloy steel for automotive application
|
Predicting lifetime of silver and gold coating depending on their thickness, stress and environmental conditions
|
Understanding durability of lubricant/DLC coating interface
|
From DLC to Si-DLC based layer systems with optimized properties for tribological applications
|
|||
| F2-2 |
HIPIMS Discharge Dynamics: Evolution and Origin of Plasma Instabilities
|
Modes of operation in HiPIMS: Understand and optimize the discharge pulse
|
High-rate reactive deposition of multifunctional Ta-O-N films using high power impulse magnetron sputtering
|
Variation of high power pulsed / modulated pulsed power magnetron sputtering based on oscillatory voltage wave forms for the deposition of carbon and aluminum oxide coatings
|
The development and the application of a high power impulse inverted cylindrical magnetron sputtering system for the elaboration of nanomaterials on wires or fibers.
|
Low pressure High Power Impulse Magnetron Sputtering systems for deposition of biomedical functional thin films
|
Material properties of Aluminum Metal (Titanium/Chromium) Nitride coatings deposited by High Power Impulse Magnetron Sputtering (HIPIMS+) technology.
|
On the Influence of superimposed MF and HPPMS/HiPIMS pulsed packages on the deposition rate and properties of TiN
|
Angle-resolved energy flux measurements of a HIPIMS-powered rotating cylindrical magnetron in reactive and non-reactive atmosphere.
|
|||
| G5-1 |
Ion treatment and duplex coatings by arc plasma immersion surface engineering processes.
|
Growth kinetics of electrochemical boriding of titanium
|
Improvement of Electrical Properties of Silicon Oxide Film with Ultraviolet and Organic Gas Assisted Annealings
|
Enhancement of gas barrier properties of polypropylene by surface treatment before DLC coating
|
Cathodic Arc Plasma Treatment for Surface Alloying and Modification
|
Evaluation of Electochemical Boriding of Inconel alloys
|
Electrochemical Boriding of Molybdenum
|
Mechanical and Microstructural Characterization of Nitrided AISI 4140 steel with Electroless NiP Coating
|
||||