ICMCTF2007 Tuesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, April 24, 2007 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | ||||||||
| A1-2 |
Formation of Novel Diffusion Barrier Coatings and their Influence on the Oxidation Behavior of Coated Heat Resistant Alloys
|
Long-Term Testing of Aluminide Coatings on Fe-Base Alloys
|
Investigation of High Temperature Oxidation Properties of Pack Aluminized High Entropy Alloy at 1100°C
|
Oxidation Behavior of Multi-Component (Ti-Al-Cr-Si-V)xNy Nitride Coatings at Elevated Temperature
|
Towards the Understanding of Wear Mechanisms for Alumina Coatings in Metal Cutting Operations.
|
Triboactive Materials for Dry High-Speed Sliding Applications up to 800°C
|
Oxidation Behavior of Chromium Nitride and Chromium Aluminum Nitride Thin Films by DSC and TG Analysis
|
||||
| B2-2 |
Large Area Filtered Plasma Deposition Technology and its Applications.
|
Types of Cathodic Vacuum Arc Sources and its Application Potential
|
Large Area Vacuum Arc Deposition by Multi-Source Flux Mixing
|
||||||||
| B5-3 |
Stress, Interfacial Effects and Mechanical Properties of Nanoscale Multilayered Coatings
|
Stress Gradients in TiN Coatings
|
The Effect of Cu Content on the Microstructures, Mechanical and Antibacterial Properties of CrCuN Nanocomposite Coatings Deposited by Pulsed DC Reactive Magnetron Sputtering
|
Thermal Stability and Oxidation Behaviour of CrAlN Coatings
|
Erosion Resistance of BC and CrN Coatings
|
Synthesis and Characterisation of Cr-B-N Coatings Deposited by Cathodic Arc Plasma Deposition
|
Synthesis and Characterization of Zr(N,O) Thin Films on AISI 304 Stainless Steel by Ion Plating
|
Fatigue and Corrosion-Fatigue Performance of a SAE Q&T 4340 Steel Coated with a Ti/TiAlN/WC/C Film, Deposited by Arc Enhanced Magnetron Sputtering
|
|||
| C3-1 |
Transparent Conducting Oxide Films for Thin Film Silicon Photovoltaics
|
Post-Deposition Annealing Effect on the Characteristics of Highly Transparent and Conducting ZnO-SnO2 Thin Films Deposited by Filtered Vacuum Arc Deposition
|
Properties of Highly Oriented ZnO Nanowires Grown by Hydrothermal Method
|
Optical Properties of Zinc Oxide Films Grown by Atmospheric-Pressure Chemical Vapor Deposition Using Zn and H2O as Source Materials
|
Electroluminescence of Zinc Oxide Films Prepared via Polymeric Precursor and via Sol-gel Method.
|
Luminescence Enhancement by an In2O3 Buffer Layer Inserted for the ZnGa2O4 Phosphor Screen
|
Optical Characterizations of Complete TFT-LCD Display Devices by Phase Modulated Spectroscopic Ellipsometry
|
Studies on Electrochromic Smart Windows Based on Titanium Doped WO3 Thin Films
|
|||
| E1-2 |
The Inclined Impact Test, an Efficient Method to Characterize Cohesion and Adhesion Properties of Coatings, Deposited on Bearing Rings
|
Friction and Wear of Coatings - a Review and View into Future
|
Fretting Wear of TiN and VC PVD Coatings Under Variable Environmental Conditions
|
Tribological and Mechanical Properties of CrN / TaN Heterostructure Thin Film
|
The Influence of Bias Voltage on Structure and Mechanical/Tribological Properties of Arc Evaporated Ti-Al-V-N
|
Adhesion of AA 5182 Aluminum Sheet to Nitrided and DLC Coatings at 420°C
|
Influence of Contact Conditions on Tribological Behaviour of DLC Coatings
|
Influence of the Normal Load on the Tribological Behaviour of Graphite Powders
|
|||
| F4 |
Probing Thin Layers and Interfaces Using Electron Energy-Loss Spectroscopy
|
Complex Oxide Characterization in the Aberration Corrected STEM
|
Complex Nano-Scale Phase Separation: the Origin of Colossal Magnetoresistance Effect
|
TEM Sample Preparation Challenges for a New Generation of Microscopes
|
Advanced Spectrum Imaging Techniques for Electron Microscopy
|
Characterization of Adhesion Between Non-Hydrogenated DLC Coatings and Aluminum by Focused Ion Beam Microscopy
|
|||||
| G1-1 |
Industrial Production of PVD Coatings for Tools and Components
|
RF Plasma Enhanced Cylindrical Magnetron Sputter Deposition
|
Room-Temperature Industrially-Scaled Pulsed Laser Deposition of Coatings for Wear-Protection, Low-Friction, Decorative and Biocompatible Applications
|
Sputter Power on the Antibacterial Capabilities and Microstructure of ZrAlNiCuSiB Thin Films on 304 Stainless Steel
|
Fatigue Properties of Micro Arc Oxidation Coatings on Al Alloy
|
Fe-Al Formation On the Surface of 45 Carbon Steel by Plasma Alumizing
|
Thermal Sprayed Coatings of Aluminium Matrix Composites with sol-gel Silica Coated SiC Particles on Steels
|
Present Status in Double Glow Plasma Surface Metallurgy Research
|
|||
| TS4-1 |
New, Engineered Thin Film Structures for Advanced Nanotech Applications
|
Understanding of the Barrier and Release Properties of Thin Model HDFD/Ag-Plasma Polymer Nanocomposite Films
|
Deposition of In Situ Structured DLC-Coatings
|
Magnetron Sputtered Graded Nanostructured TiNi Shape Memory Thin Films
|
|||||||