ICMCTF2007 Thursday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Thursday, April 26, 2007
8:00 AM 9:00 AM 10:00 AM 11:00 AM
A3-3
Luminescence Sensing of Temperatures in Thermal Barrier Coatings
Studies of TBC Ageing by Photothermal Techniques
Durable APS Sensor Coatings for Remote High Temperature Detection
Sensor TBCs: Remote Condition Monitoring of EB-PVD Coatings Utilising Laser Induced Phosphorescence (LIP)
Effect of Excitation Energy on Luminescence Decays in Rare-Earth Doped High Temperature Oxides
Hyperspectral Imaging of Residual Stress Distributions In Thermally Grown Oxides
High-Temperature Vibration Damping Characteristics of Thermal Barrier Coating Systems
Relationships Between Microstructural Features and Optical Properties of Yttria-Stabilized Zirconia Plasma-Sprayed Coatings
B3
Enhancement of Coating Adhesion by WC Single-Phase Interfacial Layer for Cemented Carbide Based Coated Cutting Insert
Influence of Growth Texture on the Wear Properties of CVD α-Al2O3 Coatings
Chemical Vapor Deposition of Thin Films and Coatings: Evaluation and Process Modeling
Deposition of Metastable (Ti,Al)N Coatings by Thermal CVD
Microstructural Investigation of MTCVD (Ti(C,N) Coatings
Effects of Deposition Temperatures on the Properties of Hermetically Carbon-Coated Optical Fibers Prepared by Thermal Chemical Vapor Deposition Method
B6-1
The Origin of Superhardness in nc-TiN/a-Si3N4 Nanocomposites
Metastable Phase Selection and Spinodal Decomposition in Ti1-xSixNy System Studied by ab Initio Thermodynamic Modeling: A Comparison with the TiN/CrN-AlN System
Ti-Si-C Thin Films Deposited by Magnetron Sputtering from a Ti3SiC2 Target
Room Temperature Deposition and Characterization of Hard Ti(X)N (X= Y, Si) Nanostructured Composite Films
Characterisation of Hard Ti-Si-B Coatings Deposited by Pulsed Unbalanced Magnetron Sputtering
Improvement of the Cutting Performance of TiSiN Coated Cemented Carbide-Tools
Mechanical Property and Cutting Test of Multilayer Coating System with Si Containing Layers
Comparative Study of Nanocomposite Ti-B-C, Ti-B-C-N, and Ti-B-C-N-Si Films Deposited by Unbalanced Magnetron Sputtering
Hard Tribological Ti-(Al,Cr,Si)-(B,N) Films with Enhanced Thermal Stability, Corrosion- and Oxidation-Resistance
D2-2
Laser Micro and Nanoprocessing of Diamond and Diamond-Like Carbon Films
Comparative Studies of Influence of Acetylene to Argon Flow Rate Ratios on Amorphous Carbon Films Produced on Steel Substrates by Plasma Immersion Ion Implantation and Deposition
Successful CVD Diamond Integration with GaN for High Power Electronics Applications
The Electrical Properties of Amorphous Carbon at High Electric Field Using the Sandwich and Coplanar Structure
Structure, Electronic Characterisation and Applications of Nanostructured Carbon Thin Films
Anti-Inflammatory, Antiallergic and Anticancerogenic Properties of NCD
Low-Friction Diamond-Like-Carbon (DLC)-Layers for Humid Environments
Deformation Behaviour of DLC Coatings on (111) Silicon Substrates
Effect of Residual Stress in P Doped Microcrystalline Silicon Carbide (mc-SiC) Films Grown by Hot-Wire Chemical Vapor Deposition (HWCVD)
E2-3
Exploiting Quantitative In-Situ Nanoindentation to Investigate the Mechanisms of Plastic Deformation in Thin Films
Recent Advances in Nanomechanical/Nanotribological Testing of Ultra-Thin Films for Stiction Control in MEMS Devices
True Hardness Measurement by Nanoindentation using a Single Sharp Indenter
Atomic Force Microscope Investigation on Static Versus Dynamic Nanotribological Evaluation of Metal-ZrN and ZrN Thin Films
Limits of Measurement and Analysing Techniques for the Determination of Mechanical Coating Parameters - a) classical indentation and b) indenters of the next generation
FEM Simulation of the Effect of Surface Roughness on Nanoindentation of Thin Films With a Spherical Indenter
On the Problem of Properly Designed FE-Models for Mechanical Contact Problems on Layered Materials
Understanding Automotive Coatings Behaviour using Nanoindentation
Deviations in Determining Coatings' and Other Materials' Mechanical Properties, when Considering Different Indenter Tip Geometries and Calibration Procedures
G4/E4
TiAlCN/VCN Nanoscale Multilayer PVD Coatings Deposited by the Combined High Power Impulse Magnetron Sputtering / Unbalanced Magnetron Sputtering, (HIPIMS/UBM) Technology Dedicated to Machining of Al and Ti Alloys
A Review of the Developments in PVD Coatings for Machining High Temperature Alloys
Application of Nano Multilayered PVD Coatings
Tribological Properties Investigation on Coated and Thermal Treated Surface used for Dry Machining
Tribological and Wetting Behaviour of a Nanolaminated PVD Tool Coating with a Nanostructured Top Layer in Interaction with a Biodegradable Lubricant for Green Metal Forming
Development of Nano-Columnar Carbon Coating for Dry Micro-Forming
Mechanical Properties and Tool Performance of Si Doped TiAlN Coatings Deposited by Arc Ion Plating
Development of Nano-Textured Self-Lubricating Adaptive Films
Microstructure and Vacuum Sliding Behaviour of Thermally Oxidized Ti-6Al-4V Alloy
H2
Influencing Parameters for Thin Film Deposition in High-Power Impulse Magnetron Sputtering Processes
Efficiency of High-Power Pulsed Magnetron Sputtering
Modulated Pulse Power Technology for Protective and Tribological Coatings
CrN/NbN Nanoscale Multilayer Coatings with Enhanced Corrosion Resistance Achieved by HIPIMS Interface Pre-treatment
Growth of ZrO2 Films by High Power Pulsed Magnetron Sputtering
HIPIMS Plasma Impedance Characterization
New Process Latitude in the Plasma Technology by HIPIMS/HPPMS using High Peak Pulse Power Supply in Unipolar, Bipolar, and DC with Additional Pulse-Combined Mode
Sessions | Time Periods | Topics | Schedule Overview