ICMCTF2006 Wednesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, May 3, 2006 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | |||||||||
| A3-2 |
Erosion and FOD of TBCs: Mechanisms, Maps and Models
|
Experiences with Improving Toughness in Low κ Thermal Barrier Oxides Based on ZrO2-GdO1.5
|
Thermal Cycling Behavior of Lanthanum Zirconate as EB-PVD TBC on Modified NiAl Alloy
|
Parameters Affecting TGO Growth and Adherence on MCrAlY-Bond Coats for TBCTs
|
Oxidation Resistant Coatings in Combination with Thermal Barrier Coatings on γ-TiAl Alloys for High Temperature Applications
|
Effect of Impurities on the Properties of Thermal Barrier Coatings
|
Buckling Delamination in Compressed Multilayers on Curved Substrates with Accompanying Ridge Cracks
|
Thermal Cycling Lifetime and Microstructural Development of Thermal Barrier Coatings with Air Plasma Sprayed NiCoCrAlY Bond Coats
|
||||
| B3 |
Chemical Vapor Deposition of Transition Metal Diborides from Single Source Precursors
|
Microwave Atmospheric Plasma Technology for Surface Treatment and Reactive Coating on Steel Surfaces
|
High Temperature Processing of Poly-SiC Substrates from the Vapor Phase for Wafer-Bonding
|
TiN/SiNx Multilayer Coatings by Chemical Vapor Deposition in a Fluidized Bed Reactor at Atmospheric Pressure (AP/FBR-CVD)
|
Vapor Growth of SiC Bulk Crystals and its Challenge of Doping
|
TEM Investigation of CVD TiN/κ Alumina Multilayer Coatings
|
CVD Deposition and Characterization of Coloured Al2O3/ZrO2 Multilayers
|
Nanoindentation Hardness and Microstructure of CVD α-Al2O3 and -Al2O3 Coatings
|
Aluminium Coating Modified with Hf on Ferritic Steels by CVD-FBR Technology
|
Al-Mn CVD-FBR Protective Coatings for Hot Corrosion Application
|
Mechanical Stresses in Catalytic Chemically Vapour Deposited Polycrystalline Silicon Films
|
|
| B5 |
Combination of Coating and Heat Treatment Processes
|
Study on the Effects of Microblasting on the Topography of Cemented Carbide Tools
|
Surface Pre-Treatment and Duplex Technology
|
Duplex Plasma Nitriding and Nanostructured TiAlN/CrN PVD Coating
|
The influence of Substrate Preparation on the PVD Coating Graded Zirconium Carbide (ZrCg)
|
Improvements on the Wear Resistance of High Thermal Conductivity Cu Alloys Using an Electroless Ni-P Coating Prior to PVD Deposition
|
Effect of Heating Post-treatments on Nitrided Stainless Steel
|
Modeling, Production and Characterization of Duplex Coatings (HVOF and PVD) on Ti6Al4V Substrate for Specific Mechanical Applications
|
||||
| D3-1 |
Introduction to Special Forum
|
Selective Synthesis of Carbon Nanotubes in a Large Scale and their Applications
|
The Nano-Carbon: Potential and Practical Applications with Business Models
|
A Flat-Panel Lamp Based on Carbon Nanotube Field Emission
|
Effect of Ar Neutral Beam Treatment of Carbon Nanotubes for Enhanced Field Emission
|
Field Emission Characteristics of Chromium Carbide Capped Carbon Nanotip
|
Magnetic Data Storage Devices Using Carbon Nanotubes
|
|||||
| E3-2 |
The Relationship Between Strain Generation and Relaxation, Composition and Electrical Performance in Strained Si/SiGe MOS Technology
|
The Extended Hertzian Theory for Normal and Lateral Loads Applied to the Determination of Intrinsic Stresses via Indentation Experiments - an in Principle Feasibility Study
|
Determining Viscoelastic Properties from Instrumented Indentation
|
Nanocontact Morphology Model Considering Surface Roughness During Nanoindentation
|
On the Relationship Between Plastic Zone Radius and Residual Depth During Nanoindentation
|
Numerical Analysis on the Contact Stresses Developed During the Indentation of Coated Systems with Substrates with Orthotropic Properties
|
Elastic Properties of Polycrystalline Gold Thin Films: Simulation and X-Ray Diffraction Experiments
|
Determination of Young's Modulus and Yield Stress of Porous Low-k Materials by Nanoindentation
|
Improvements on Industrial Adhesion Evaluation for PVD and PACVD Coatings
|
|||
| G6 |
Bioactive Thin-Film Coatings: A Review
|
Mechanical, Tribological, and Heamocompatibility Properties of ZrN-Ag, ZrN-Au, and ZrN-Pd Nanocomposite Films
|
Investigation of Mechanical and Biological Properties of Surfaces and Coatings Treated by Intense Ion Beams for In-body Applications1
|
Effect of Aluminum on the Corrosion Characterization of the NiTiAl Thin Film
|
Thin Coatings in Dental Application Against Fretting Wear
|
In Vitro Corrosion and Wear-Corrosion Resistance of Pulsed Plasma Nitrided 304 AISI Stainless Steel
|
||||||
| G7-2 |
In-Situ Real Time Sputtering Source Health Monitoring Using Ultrasonics
|
|||||||||||
| H2-2 |
Effect of Various Substrates on Electrical Resistance and Thermo-Electric Power of Physical Vapor Deposited Tellurium Thin Film
|
Effect of Mechanical Strain on the Performance of P-Channel Poly-Silicon TFT Fabricated on Metal Foil Substrate
|
Fabrication of Copper Gate Electrode by Selective Electrodeposition Through Mask for Thin-Film Transistors
|
Development of a New Magnetoelastic Thin Film Gas Sensors for Humid Environment
|
Amorphous Germanium Thin Films for Negative Electrode in Lithium-ion Microbatteries
|
Fabricating Highly Active Mixed Phase TiO2 Photocatalysts by Reactive DC Magnetron Sputter Deposition
|
||||||