ICMCTF2002 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 24, 2002 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:30 AM | 9:30 AM | 10:30 AM | 11:30 AM | |||||||||
| A2-1 |
Novel Composite Coating Technology in Primary and Conversion Industry Applications
|
Wear Observations of PVD TiAlCrY(O)N Coated High-Speed Milling Tools at Cutting Temperature up to 950°C
|
Synthesis and Characterization of Nanolayered TiB2/TiC Multilayers for Dry Machining and High-Temperature Tribological Applications
|
Thermal Spray Coatings for High Temperature Wear Applications - An Overview
|
||||||||
| A3-3 |
Designing Low Thermal Conductivity, Thermal Barrier Coatings
|
Evaluation of the Low Conductivity Ceramic Thermal Barrier Coating for Aero-engine Turbine Blades by the "Herringbone" Process
|
Influence of Bond Coat Surface Geometry on the Spallation Life of Ni(Pt,Al)/EB-PVD Thermal Barrier Coatings
|
A Monte Carlo Model for Predicting the Erosion Rate of EB PVD TBCs
|
Microstructures and Crystallographic Texture of EB-PVD TBCs on Flat Surfaces as a Function of Position in the Chamber
|
|||||||
| B3-2 |
Growth and Characterization fo Single Crystal Ti3SiC2(0001) Thin Films
|
Wear Protective Coatings Consisting of TiC-SiC-C Deposited by Magnetron Sputtering
|
Properties of TiSiNx Deposited by Concurrent Cathodic Arc Evaporation and Magnetron Sputtering
|
Microstructure and Mechanical Properties of Nanostructured Ti-Si-N Coatings
|
PVD Grown (Ti,Si,Al)N Nanocomposite Coatings and (Ti,Al)N/(Ti,Si)N Multilayers: Structural and Mechanical Properties
|
Structure and Mechanical Properties of Superhard Thin Films
|
Tough Nanocomposite Coatings: Design and Testing
|
Mechanical Properties and Tribological Behavior of Al/Al2O3 and Ti/TiN Multilayer Nanocomposite Thin Films
|
Effect of the Substrate Bias on the Microstructure of Polycrystalline CrN/NbN Superlattice Coatings Grown by the Combined Cathodic Arc / Unbalanced Magnetron Sputtering Method
|
Corrosion Resistance of CrN/NbN Superlattice Coatings Grown by Various Physical Vapour Deposition Techniques
|
Synthesis, Characterization and Properties of Ti3SiC2 Thin Films Deposited by PLD
|
Effect of Ultra Dispersed Diamonds on Mechanical Properties of Alumna Composite Coatings
|
| C2-1 |
Investigation on TiOx Coatings Produced using Variable Magnetic Field Magnetrons in Dual Bipolar Pulsing Mode.
|
Hetero-Epitaxial Growth and Optical Properties of LaF3 on CaF2
|
Optical Constants and Roughness Study of DC Magnetron Sputtered Iridium Films
|
Metallization of Ceramic Vacuum Chambers for SNS Ring Injection Kicker Magnets
|
Sputter Deposition of Silicon-Oxide Optical Coatings
|
Zirconia and Zirconium Silicate Thin Films Deposited by Magnetron Sputtering
|
Properties of Nickel Oxide Thin Films Deposited by Reactive Magnetron Sputtering
|
Effect of Frequency and Pulse Width on the Properties of DLC Films Prepared by FCVA Together with Substrate Pulse Biasing
|
Influence of rf Substrate Bias on SiO2 Films Prepared by ECR-PECVD
|
Thin Films of Copper : Aluminum Alloy by Electron Beam Evaporation Technique: Effect of Substrate Temperature on Electrical and Optical Properties
|
Effect of Oxide Growth Temperature on the Electrical Performance of Extremely Thin ( ~3 nm) Oxides of Silicon
|
|
| D2-1 |
Hard Coatings by Conversion of Silicon Carbide to Diamond-Structured Carbon
|
Very High Growth Rate Chemical Vapor Deposition of Single-Crystal Diamond
|
Decrystallization of Diamond Under Pulsed Excimer and YAG Lasers and Subsequent Lattice Relaxation
|
Enhancing Nucleatin Density & Adhesion of Polycrystalline Diamond Films Deposited by HFCVD Using Surface Treatments on Cemented Tungsten Carbide
|
Time-modulated Deposition of Smooth Polycrystalline Diamond Films Using CVD
|
Fabrication of Tubes of Diamond with Micrometric Diameters and Their Characterization
|
Cathodoluminescence Characteristics of Polycrystalline Diamond Films Grown by Cyclic Deposition Method
|
|||||
| E3-1 |
Friction and Durability of Monolayer Lubricants for MEMS in Harsh Environments
|
Impact of Variable Loading Conditions on Fretting Wear
|
ESD Coatings on Small Caliber Gun Barrels
|
Reduction of Tool Wear in Metal Cutting Using External Electromotive Sources
|
Some New Perspectives on Gun Bore Erosion Mechanisms Using Laser Pulse Heating
|
Corrosion Behaviour of Amorphous Al-Cr and Al-Cr-(N) Alloys Deposited by dc Magnetron Sputtering on Mild Steel Substrate.
|
Corrosion Behavior of Unbalance Magnetron Sputtered TiN Films on 304 Stainless Steel
|
Performance of Nanoscale CrN/NbN PVD Coatings on Mild Steel in Various Corrosion Tests
|
The Tribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained Through Micro Arc Oxidation
|
Composite Bearing Based on Metal - Polymer - Soft Metal - Ceramics Composition
|
||
| F3-1 |
The Use of XPS in Thin Film and Multilayer Characterization of Binary and Ternary Oxides
|
Ultrathin Oxides: Real-time XPS Study of Corrosion Resistance 1
|
Analysis of Sputter Deposited ITO-layers by XPS
|
Microstructure and Chemistry of Annealed AlCuFeCr Quasicrystalline Coatings
|
Electronic Properties of Cr1-xAlxN Thin Films Deposited by Reactive Magnetron Sputtering
|
Investigation of the Residual Stresses and Mechanical Properties of (Cr,Al)N Arc PVD Coatings Used for Semi Solid Metal (SSM) Forming Dies
|
New Residual Stress Measurement in Textured Thin Film by Grazing Incidence X-ray Diffraction
|
Growth and Structure of Silica Films Deposited by Plasma-enhanced CVD on Polymeric Materials
|
Localized Deformation of Multicomponent Thin Films
|
|||
| G4-1 |
Carbon Coatings for Dry Machining and Forming Operations Deposited by Non-reactive (ta-C) and Reactive (a-C:H:Me) Cathodic Arc Processes
|
Performance of Lubricant Coatings in Dry Drilling Processes
|
Performance and Limitation of Hybrid (Hard Coating) - PVD Magnetron Sputtering (Mos2/Ti Composite) Coated Inserts Tested for Dry High Speed Milling of Steel and Grey Cast Iron
|
New Material Classes for Dry Lubricant Coatings
|
Polishing of CVD Diamond Coated Tools and Their Application in Dry Machining of Aluminum-Silicon Alloy
|
Investigating Nitriding and Duplex Surface Treatments for the Reduction of Dissolution and Soldering in Die Casting Shot Sleeves
|
Performance of Coatings Against Wear in Dry Blanking and Forming
|
Performance of New MaxitTM AlTiN Coatings in Dry and High Speed Cutting
|
Synthesis and Properties of TiAlBN Coatings for Dry Cutting Applications
|
Innovative Mono and Multilayer Hard and Autolubricant PVD Coatings for Dry Stamping Operations
|
||
| H3-1 |
Tribological Coatings for LIGA MEMS
|
Carbon Films for Microelectromechanical Systems (MEMS): a Nanotribological Study
|
Ultrananocrystalline Diamond MEMS: Properties and Applications
|
Tribology of Carbon Films and Carbon-based Mems Devices
|
Lubrication and Wear Control of Microelectromechanical Systems (MEMS) Using Fluorocarbon Monolayers and Diamond-Like Carbon
|
MEMS Devices Made from Stress-free Tetrahedral Amorphous-carbon*
|
||||||