AVS 66 Monday Morning

Extreme Fatigue Life of Graphene

Epitaxial Growth and Thermal Degradation of Monolayer MoS₂ on SrTiO₃ Single Crystal Substrates

3D Printed and Injection Molded Polymer Matrix Composites with 2D Layered Materials

Semiconducting WS₂ and h-BN Inks for Printing Optically-active Nanodevices

Transparent PEDOT:PSS Based Electro-Chromic/Thermal Devices With Excellent Durability For Applications In Smart Electronics

Edge Dominated Graphene/h-BN Lateral Hybrid Nanostructures for Electronic and Spintronic Applications

Engineering Interfaces in the Atomically-Thin Limit

Ultrasoft Slip-mediated Bending in Few-layer Graphene

Experimental Study on Vanadium Oxides Films by Sputtering

Possible Structural Quantum Phase Transition in UCr2Si2 Accessed Through Cr → Ru Chemical Substitution

Dynamic Spin Transport in Antiferromagnetic Insulators: Angular Dependent Spin Pumping in Y₃Fe₅O₁₂/NiO/Pt Trilayers

Pressure Studies of Strongly Correlated Phases in Rare Earth Compounds

Fermi Surface Reconstructions and Transport Properties in Heavy-fermion Materials

Direct Measurement the 5 f_5/2 and 5 f_7/2 Unoccupied Density of States of UO₂

Optimizing the Magnetic Performance of Tetragonal ReFe_12-xM_x Phases by First Principles Computational Simulations

Optical Excitation Effect on Magnetodielectric and Photodielectric Properties of Rare Earth doped ZnO:Na Nanoparticles

Surface Pre-functionalization of SiN_x and SiO₂ to Enhance Selectivity in Plasma‑Assisted Atomic Layer Etching

Area-selective Atmospheric-pressure Spatial ALD of SiO₂ using Interleaved Back-etch steps Yielding Selectivity > 10 nm

Mechanisms of Precursor Blocking during Area-selective Atomic Layer Deposition using Inhibitors in ABC-type Cycles

Area-Selective Deposition of TiO₂ using Isothermal Integrated Atomic Layer Deposition and Atomic Layer Etching in a Single Reaction Chamber

Area-Selective Atomic Layer Deposition of Metal Oxides on an Inhibitor-Functionalized SiO₂ Surface

Area-selective Deposition Achieved in a Continuous Process using Competitive Adsorption

Surface Chemistry during Plasma-Assisted ALE: What Can We Learn from ALD?

Improving Accuracy in Quantitation by XPS: Standards, Cross-sections, Satellite Structure

A Rigorous Approach to the Calculation of the Uncertainties in XPS Analysis

Gross Errors in XPS Peak Fitting

Improved Energy Referencing in XPS

How to Avoid Errors in the Interpretation of XPS Data?

Misinterpretations in the Spectroscopic Analysis of Heterogeneous Materials and Defected Structures

Current Issues and Solutions for Reliable, Robust and Reproducible XPS Spectral Acquisition and Data Reporting

Intensity Calibration and Sensitivity Factors for XPS Instruments with Monochromatic Ag Lα and Al Kα Sources

Reporting XPS Measurements and How Can We Do Better to Minimize Reproducibility Problems

Bio-inspired Peptide-polymer Hybrid Mucin Analogues: Applications in Osteoarthritis and Kidney Stone Disease

Investigation of the Mechanical and Dielectric Properties of Bone Scaffolds

Bioelectronics with Graphene and Graphene-Based Hybrid-Nanomaterials – From Transparent to Fuzzy Interfaces

Experimental Observation of Multiple Plasmon Induced Transparency and Fano Resonance in Titanium Nitride Based Devices

Breaking the Mass Resolution Limit of Shear Wave Resonators in Liquid through Integrated Microfluidic Channels

Designing Anti-Fouling Lubricious Surfaces Based on Modular Approaches

All Inkjet Printed Biosensor for Easy and Rapid Detection of Immunoglobulin G (IgG) Protein

Biosensing Applications of Silver Nanorods Array Fabricated by Glancing Angle Deposition (GLAD)

Theoretical Study of Acetic Acid Decomposition on Pd (111) using Density Functional Theory

Towards a Chemically Accurate Description of Reactions of Molecules with Transition Metal Surfaces

The Apparent Activation Energy for Complex Mechanisms: A Simple Relationship via Degrees of Rate Control

First-Principles Kinetic Monte Carlo Simulation of CO Oxidation on PdO(101): Role of Oxygen Vacancies

Accelerating ab initio Simulations using Surrogate Machine Learning Models

Integrating Materials Databases and Autonomous Workflows for the Discovery of New Heterogeneous Catalysts

Knowledge-Based Approaches in Catalysis and Energy Modelling

Piezoelectrics Meets Photonics – Acousto-Optic Microsystems

On-chip Silicon Photonics Radiation Sensors

Synthesis and Characterization of Nanoscale 3 dimensional Plasmonic Architectures

2D Raman Imaging and Characterization of Surface Acoustic Waves on GaAs Substrates

Impacts of Stress and Dissipation in van der Waals Interfaces on 2D Material Nanoelectromechanical Systems

Nanomechanical Sensing for the Life Sciences

Neutral Mass Spectrometry of Metallic Nanoparticles with Optomechanical Resonators

Mass Calibration of Nanomechanical Resonators from Electrical Measurements for Mass Spectrometry Applications

On the Versatility of Atmospheric Non-equilibrium Plasmas: Material Synthesis, Packaging Sanitation and Oncological Applications

Spectroscopic Characterization of a Multi-pins Plasma System

Breaching Debye Law by Coupling of Y2O3 Vapor Carrying Focused Atmospheric ICP Beam Penetrating Showernead's Holes with Opposite CCP Discharge during Chemical Corrosion Barrier Coating in Open Air

Streamers Effects in Cold Atmospheric Plasma Applications: Coatings, Gas Conversion, Surface Chemistries

Improved Water Intrusion Resistance on Adhesive Bonded Metals using Atmospheric CVD SiO₂ Barrier Coatings

OES Imaging and Double Langmuir Probe Studies of Flow-through, Supersonic Microplasma Jet Sources

Time-resolved Optical Emission Spectroscopy of an Atmospheric Pressure Plasma Jet – Surface Interaction

Atmospheric-Pressure Plasmas As Ionization Sources For Atomic, Molecular, And Biological Mass Spectrometry

Computational Modeling of Capacitively Coupled Plasmas at Moderate Pressures in gases of Argon, Helium and Nitrogen

Relation between Atomic Interaction Parameters of a Surface Material and its Physical Sputtering Yield; How to Predict the Etching Rate based on the Surface Material Properties

Investigation on the Uniformity Control of the Electron and the Ion Kinetics in a Capacitively Coupled Plasma Reactor using a Parallelized Particle-in-Cell Simulation

Capacitively Coupled Plasma Uniformity Improvement Using Phase and Amplitude Control of Electrode Potential

Kinetic Modeling of Non-Equilibrium Plasmas for Modern Applications

Automated Reduction of Plasma Chemistry Sets

Prediction of Etch Rates for New Materials by Machine Learning - Case Study for Physical Sputtering

Maskless and Contactless Patterned Silicon Deposition using a Localized PECVD Process

Measurement of a Two-Level-System Dipole Distribution in a Nanoscale Aluminum Oxide Barrier

Mapping Quantum Systems to Quantum Computers using Symmetry

History of Superconducting Qubit Coherence and the Current Challenges

Loss and Decoherence Benchmarking of Superconducting Transmon Qubits

Towards PAMBE Grown Nitride Superconductors for Epitaxial Josephson Junctions and Quantum Circuits

Josephson Junction Metrology for Superconducting Quantum Device Design

Superconducting Metamaterial Resonator Spectrum and Interaction with Qubit

Enabling Energy Dense Lithium Batteries Using Thin Film Technology

Molecular Layer Deposition of Organic Li-containing Thin Film for Li Ion Solid-state Batteries

Organic/Inorganic Solid Electrolytes and Electrode Coatings for 3D Lithium-ion Microbatteries

Structural Rearrangement in Li_xV₂O₅ Thin Films_, a Cathode Material for All-solid-state Batteries

Atomic Layer Deposition and Performance of Sodium and Potassium Electrolytes for Conformal Solid State Batteries

ALD as Tool for Bottom-up Synthesis of Catalyst Powders

Strategies for the Stabilization of Metal Anodes for Li and Na Metal Batteries

Competition Between Incorporation and Desorption of Nitrogen in Plasma-Enhanced Atomic Layer Deposition of Cobalt and Cobalt Nitride Catalysts

A Room-Temperature Magnetoelectric Multiferroic made by Thin Film Alchemy

Magnetic Losses in FeGa/NiFe/Al₂O₃ Laminates for Strain-Mediated Multiferroic Micro-Antenna Applications

Multiferroic Gd-substituted HfO₂Thin Films

Epitaxial Growth of Antiferromagnetic NiO Films by Off-axis Sputtering for Spintronic Devices

Structural and Magnetic Properties of CoPd Alloys for Non-Volatile Memory Applications

Size Effects of the Electromechanical Response in Ferroic Thin Films: Phase Transitions to the Rescue

Ferroelectrics Meet Ionics in the Land of van der Waals

Adsorption-controlled Epitaxial Growth of the Hyperferroelectric Candidate LiZnSb on GaSb (111)

Operational Experiences of Compact Non-Evaporable Getter Pumps in CHESS-U and CBETA

Al₂O₃ Coated Stainless Steel Vacuum Chamber and Parts

Comparative Outgassing Study of Identical Vacuum Chambers

The NIST VAcuum LEaks System (VALES): a new system for the primary and comparison calibration of small gas flows.

Creating a Controlled Gas Environment for Lifetime Testing of EUV Optics

Sampling System Design to Predict Mixture Composition at a Quadrupole Mass Spectrometer Ion Source

Quantum Pressure Standard in the range 200 Pa to 20 kPa using Superconducting Microwave Cavity

Progress Toward Primary Pressure Measurements based on Refractive Index

Application of Porous Conductance Element for High Vacuum Gauge Calibration