ICMCTF 2023 Wednesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, May 24, 2023
8:00 AM 9:00 AM 10:00 AM 11:00 AM 12:00 PM
A2-2-WeM
On the Suitability of MoNbTaW Based Thin Films to Act as Diffusion Barriers
Improvement of EBC Performance by Controlling Driving Forces for Mass Transfers in Oxides
Steam Oxidation Kinetics of Si / Modified Yb2Si2O7 Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites at 1250 oC – 1350 oC
Raman Spectroscopic Investigation of SiO2 TGO Phase Transformation and Si and SiC Substrate Stress
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Hot Section Coating Technology as an Enabler for Sustainable Propulsion
Development of Tantalum Coating by the Cold Spray
B3-WeM
ta-C by Magnetron Sputtering Using a Newly Designed Cylindrical Rotating Cathode with Significantly Enhanced Sputter Power Density
High Performance ta-C Coatings with Enhanced Temperature Stability for Industrial Applications
DLC Coatings for Mechanical Seals Applications
C1-1-WeM
Large-Scale Manufacturing Techniques for Metamaterials and Their Industrial Applications
High-Rate Deposition of Calcium Fluoride Coatings Using Radio-Frequency Magnetron Sputtering
Reactive Sputter Deposition of Nanoporous Black Zinc and White Zinc Oxide Coatings
High Hall Mobility W-Doped In2O3 Conductive Films with Thicknesses of Less Than 10 Nm Deposited on Glass Substrates
The Effects of Growth and Post-Annealing Temperatures on MoS2 Thin Films Deposited by Magnetron Sputtering
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
E1-2-WeM
Coatings and Composites for Extreme Environments Lab (CE)2
Tribological Behavior of Mos2 Based Coatings Under Different Sliding to Rolling Lubricated Contact Conditions
Catalytic Transformation of Lubricants to Wear-Protective Tribofilms on Selected Steel Surfaces During Sliding
Aromatic Compounds as Sustainable Lubricants for Iron
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
How Efficient Is the Self Adaption Concept for Low Friction with TMD-Based Sputtered Coatings
Self-Lubricating Titanium Alloys: Design and High Temperature Tribological Performance Up to 800 °C
Electrodeposited of Silver Nano-Particules Plant Based to Improve Lubrication of Composite Films
G1-WeM
Improve Cutting Performance of Carbide Cutting Tools with Multilayer TiAlxN-Based Arc-Cathodic PVD Coating for Industrial Applications
Correlation between Deposition Conditions, Properties and Cutting Performance of Al-Rich AlCrN Wear Protective Coatings Produced by Reactive Arc Evaporation
Designed for Impact: Successful Forming of 3rd Generation Advanced High Strength Steels in Electric Vehicles’ Body-in-White
In-Situ Incorporation of Nanocontainers During Plasma Electrolytic Oxidation
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
G2-1-WeM
Enhanced Tool Surface Properties Against Adhesion in Aluminum Forging
Evaluation of Permanent Thin-Film Coatings Applied to Die Surfaces to Reduce Lubricant Use during Aluminum Forging Operations
G3-WeM
A Novel AlCr-Based PVD Coating Design for Threading Operation of Super Duplex Stainless Steel
Property and Deposition Technology for Highly Al-Containing AlCrN Coatings by Arc Ion Plating
Challenges and Target-Oriented Paths to Maintenance-Free High-Performance Progressive Dies Using HiPIMS-Coatings
Oxidation and Wear Behavior of CrAlMoN with Varied Mo-content for Cutting TiAl6V4
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
The Significance and Application Area of CVD TiCN/Al2O3 based Coatings for Today’s Cutting Tools
Indentation and Sliding Contact Testing of Three Laser-textured and PVD-coated Cemented Carbide Tools
G4-WeM
Water-Repellent and Low Emissivity Coatings on Fabric Prepared by Roll-to-Roll Hollow Cathode PECVD and Magnetron Sputtering
Amorphous Carbon Coatings on Glass for High Voltage Protection
Plasma Pretreatment of Small Parts and Granular Materials in Bulk Vacuum Coating
H2-2-WeM
The Nature of Defects and their Dynamics Characterized using Scanning Electron Microscopy Approaches
Measurement of Hardness and Elastic Modulus by Depth Sensing Indentation: Improvements to the Technique Based on Continuous Stiffness Measurement
Ultrasonically Induced Nanofatigue During Nanoindentation
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Comparison of Electrical and Image-Based Sensing for Quantitative in Situ TEM Nanomechanical Testing
Understanding the Interface Strain Induced hcp-to-bcc Phase Transformation in Nanolaminate Mg
H3-2-WeM
Characterizing Interfacial Straining Mechanisms Using High Temperature in situ Tem
Quantitative in Situ TEM Observations of a Grain-Boundary-Migration-Assisted, Radiation-Damage Healing Mechanism in Ultrafine Grained Au Thin Films
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Sessions | Time Periods | Topics | Schedule Overview