ICMCTF2019 Tuesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, May 21, 2019
1:40 PM 2:40 PM 3:40 PM 4:40 PM
A1-2-TuA
Nano Coatings To Achieve Cost Effective And Long Lifetime SOFC Interconnects
Influence of Ta Content on Properties of TiAlTaN Films
Cr-Al-Si-N Quaternary Coating Applied on Zirconium Alloy: Combining Superior Resistance of High-temperature Steam Oxidation and Improved Mechanical Properties
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Polyurethane Protective Coating with Self Polishing Property
Production of a Zinc Impregnated Stainless Steel Surface Utilizing Cathodic Plasma Electrolytic Deposition (CPED) for Retardation of Cobalt Ion Deposition in High Temperature Aqueous Conditions
B4-2-TuA
Fracture Toughness Enhancement in Superlattice Hard Coatings
Simultaneous Topographical and Electrochemical Mapping using Scanning Ion Conductance Microscopy - Scanning Electrochemical Microscopy (SICM-SECM)
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Performance Comparison of Two Diffusion Models for Describing the Growth Kinetics of Iron Boride Layers
Microstructure and Surface Strength of Chemically Modified WC-Co for Adhesive Strength Improvement
B7-TuA
On the Growth of TiOx Coatings by Reactive Magnetron Sputtering from Metallic and Ceramic (TiO1.8) Targets: A Joint Modelling and Experimental Story
Titanium Atom and Ion Number Density Evolution in Reactive HiPIMS with Oxygen, Nitrogen and Acetylene Gas
Phase Formation during Sputtering of Copper in Argon/Oxygen Mixtures
Plasma Diagnostics During Growth of Transparent Conductive Oxide Thin Films by Magnetron Sputtering
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
On Three Different Ways to Quantify the Degree of Ionization in Sputtering Magnetrons
Characterization of Microwave Surfatron Plasma-enhanced-ALD System for Low-temperature Deposition of Thin Oxide Films
D2-TuA
Bio-Tribocorrosive Behavior of the Contact M30NW Stainless Steel against HDPE Reinforced with MoS2 Particles. New Polymer Implant: Promising Material?
Evaluation of the Adhesion of Electrosprayed and Solution-Cast Chitosan Coatings on Titanium Surfaces
Study of the Mechanical and Tribological Properties of the TaN with Ti Inclusion Multilayer Films on Si Substrate
Enhancement of Tribocorrosion Properties of Ti6Al4V by Formation of a Carbide-Derived Carbon (CDC) Surface Layer
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Considerations when using Additive Manufacturing to make Medical Devices
Nanostructured Surfaces for (Bio)sensors
E2-2-TuA
Mechanical Behavior Study of 50 nm-thick Thin Film of Gold Single Crystal with In situ X-ray Pole Figures Measurements
Evaluation of the Mechanical Properties in Antibacterial Multi-layer HA-Ag Coatings Deposited by RF Magnetron Sputtering
Mechanical Deformation in Metal and Ceramic Nano Multilayers
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Deposition of Highly Adhesive Ta Based Thin Films on a Biomedical Grade CoCrMo Alloy
DIC on FIB Ring-Core of Thin Films for Depth Sensing Residual Stress Measurement
Metallic Glass/Crystalline Nanolayered Coatings with High Nanoscratch Resistance and Damage Tolerance
Coatings Effect On Crack Initiation Behavior Of Ti Alloys
F3-TuA
Roll-to-roll Plasma Chemical Vapor Deposition for Scalable Graphene Production
Magnetron Sputtered MoS2/C Nanocomposites as Highly Efficient Electrocatalyst in Hydrogen Evolution Reaction
HIPIMS Graphene on Copper for Heat Spreading
Tailoring Optical Properties of Two-Dimensional Transition Metal Dichalcogenides Via Photonic Annealing
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Mechanism of Formation of Nitrogenated Doped Graphene Films, Investigated by In situ XPS During Thermal Annealing in Vacuum
Engineering Point and Extended Defects in Transition Metal Dichalcogenides
Physicochemical and Mechanical Performance of Nylon 6.6 Coated Thin Free-standing Boron-doped Diamond Nanosheets
H1-2-TuA
Complex Study of Thermally Induced Order Reactions in Cu-Au Thin Films
Kinetics Dependence of Microstructure and Stress Evolutions in Polycrystalline Cu Films: Real-time Diagnostics and Atomistic Modelling
Understanding the Crystallization of Amorphous Films with Embedded Seed Crystals using High-resolution STEM Composition and Structural Mapping
In-situ Investigation of the Oxidation Behavior of Metastable CVD Ti1-xAlxN Using Combined Synchrotron XRD and DSC
In-situ X-ray Characterization of Liquid-solid Transition Phase in Small Volume
COMPLIMENTARY REFRESHMENTS IN EXHIBIT HALL
Novel Quantitative Thin Film Thickness and Chemical State Analysis X-ray Techniques
Effect of Heat Treatment on Microstructure of Erbia Film on Steel Substrate with Yittria Buffer Layer Fabricated by MOCVD
Study of Volmer-Weber Thin Film Growth Mechanisms by Coupling in situ Resistivity, Optical and Mechanical Measurements
Sessions | Time Periods | Topics | Schedule Overview