ICMCTF2018 Wednesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Wednesday, April 25, 2018 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | |||||||||
| A2 |
Corrosion Degradation of High Temperature Coatings: Similarities and Differences for Marine and Aero-Turbine Applications
|
Evolution of Microstructures and Interfaces in Doped, Layered, and Composite Coatings Exposed to Sand Laden Flows in a Gas Turbine Engine
|
The Effect of HVOF Bond Coating with APS Flash Coating on TBC Performance
|
Influence of Process Conditions and Ceramic Doping on the Performances of Advanced TBCs Based on Al Slurry
|
Synthesis and Characterization of Combined Oxides and Ni Superalloy Coatings by Cathodic Arc Evaporation for Bond Coat Application
|
Steam Oxidation Behavior of Yb2Si2O7-Based Environmental Barrier Coatings
|
The Fatigue Behavior of TiCrAlTaSiN Coated and Uncoated Titanium Alloys
|
Crack Propagation Behavior of Thermal Barrier Coatings with Cyclic Thermal Fatigue Tests
|
||||
| B1-3 |
High Quality Oxide Films Deposited at Room Temperature by Ion Beam Sputtering
|
van der Waals Oxide Heteroepitaxy
|
Color Controllable TiOxNy Coatings Deposited by Magnetron Sputtering
|
SiO2/Sc0.31Al0.69N/LiNbO3 Multilayer Structure for SAW Device Applications
|
Self-lubricant CrO-Ag Coatings for Machining Tools
|
|||||||
| B6 |
Ab Initio Inspired Design of Ternary Boride Thin Films
|
Enthalpy/Entropy-driven Segregation of Solute Elements of Cu Alloy Films to Self-form < 2 nm Unitary V to Quinary V-Nb-Mo-Ta-W Diffusion Barrier Layers
|
Mechanical Properties of V0.5Mo0.5N1-xOx Thin Films
|
Hard Transparent Coatings in the Al-Si-O-N System
|
Exploitation of Surface Modification and Architecture Control for Multi-Functional Coatings via Nano-Composite, Multilayer, Hybrid Organic/Inorganic and Bio-Inspired Approach
|
The Effect of Hybrid PVD Process on the Mechanical and Antistatic Properties of TiO2 Based Nanocomposite Thin Film
|
Optical, Electrical and Structural Characteristics of Mg-doped CuCrO2 Transparent Conductive Thin Films
|
Brittle Film-induced Cracking of Ductile Substrates
|
Ultra-high Vacuum dc Magnetron Sputter-deposition and Microstructural Characterization of Zr and ZrCx Thin Films
|
|||
| C3 |
Synthesis and Optical Characterization of Cds Thin Film Obtained by Colloidal Technique
|
Electrochemical Characteristics of NixN Thin Films Deposited by DC and HiPIMS Reactive Magnetron Sputtering
|
Photovoltaic Properties of Cu2O-based Heterojunction Solar Cells using n-type Oxide Thin Films Prepared by Magnetron Sputtering System with Loading Chamber
|
Synthesis of Tungsten Bronze by a Solution-based Chemical Route and the Near-Infrared Shielding Properties of Tungsten Bronze Thin Films
|
ZnO Nano-structures Growth and Investigation
|
Nitrogen Doping of ZnO Films by Decomposition of NO Gas using Heated Ir Wire in Catalytic Reaction-assisted CVD
|
Morphology-Controlled Growth of ZnO Nanorods by Chemical Bath Deposition and Seed Layer Dependence on Their Structural and Optical Properties
|
Piezoelectric Coefficient and Morphology Investigation of the Wurtzite Ga-doped MgZnO Thin Films via RF Magnetron Sputtering
|
Growth of Al1-xScxN Thin Films for Pyroelectric and Piezoelectric Applications
|
A Simple Non-toxic Simultaneous Selenization/Sulfurization Process for the Cu(In,Ga)(S,Se)2 Thin Film Solar Cells
|
Thin Films for Transparent Thermoelectric Modules
|
|
| E1-3 |
A Study on the Tribological Behavior of the AISI 316L Steel Exposed to Boriding to Reduce its Friction Coefficient and Enhance its Wear Resistance
|
Immersion Time-affected Tribocorrosion Behavior of Cr/GLC Multilayer Coating in Artificial Seawater
|
A Comparison of the Galling Wear Behaviour of PVD Cr and Electroplated Hard Cr Thin Films
|
Microstructural Evolution of Cold-sprayed Copper Coating during Reciprocating Sliding Wear
|
Scratch Adhesion Resistance of Nickel Boride Layers on Inconel 718 Superalloy
|
Comparison of Surface Treatments for Adhesive Force Measurements Between Magnetron Sputtered TiW Thin Films and Alumina Substrates
|
Influence Of Microstructure on Wear of Boroaluminized-Hot-Work Tool Steels
|
|||||
| F4-1 |
Self-healing Thermal Barrier Coating System for Prolonged Lifetime
|
TiO2 Thin Films Deposited onto PET by High Power Impulse Magnetron Sputtering for Photocatalytic Degradation of Carbendazim
|
Thermal Stability of Structure and Enhanced Properties of Zr-Ta-O Films with Low and High Ta Content
|
Electrophysical Properties of Nanoparticle-Added PEO Coatings on Aluminium
|
Titania Films Deposited by Constant Current High Power Impulse Magnetron Sputtering
|
On the Importance of the Energy of Negative Ions in Achieving Uniform and High-quality Magnetron Sputtered AZO Films
|
Combinatorial Thin Film Materials Science: Limitations and Opportunities for Combining Experiments and DFT Based Theory
|
|||||
| G1 |
Enhanced PVD Process Control by Online Substrate Temperature Measurement
|
A Compact, Symmetrical and Efficient Filtered Cathodic Arc Source that uses Permanent Magnets
|
HiPIMS Meets Diamond
|
Functional DLC by HiPIMS and Pulsed DC-magnetron Sputtering in an Industrial Coating System
|
Microwave Assisted PVD and PECVD Systems for Carbon-Based Nano Composites
|
Correlation Between Plasma Nitriding of Several Steels and Active Nitrogen Concentration Correlated through Optical Emission Spectroscopy and Atomic Nitrogen Partial Pressure
|
CVD Technology & Machinery – Tribological Applications and High Temperature Potential
|
Vacuum Barrel Coating: An Opportunity to Performance Increase for Various Small Parts
|
Scaling Up Graphene-like Carbon Film: Insights into the Deposition Process in a Roll-to-roll rf Plasma CVD System
|
TAOS Based Cu/TiW/IGZO/Al2O3/Pt Bilayer CBRAM for Low-power Display Technology
|
||