ICMCTF2018 Tuesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, April 24, 2018 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | |||||||
| B1-1 |
Boon and Bane of Internal Interfaces and Microstructure Defects
|
The Material (in) Dependency of Impurity Affected Thin Film Growth
|
Stress in Sputtered Metal Thin Films: Dependence on Growth Rate and Pressure
|
Improved Ionization Fraction and Film Quality Using a Serpentine Linear Magnetron and a Modified HiPIMS Waveform
|
Microstructural, Mechanical and Erosion Properties of Cylindrical Magnetrons Sputter Deposited TiSiCN, TiAlVN and TiAlVSiCN Coatings on Inner Surface of Cylinder
|
Template Effect on Texture Evolution of VN Thin Films Deposited by Unbalanced Magnetron Sputtering
|
IN SITU High Resolution Stress Measurement Coupled with Interrupted Deposition in Case of Völmer-Weber Thin Film Growth
|
High-Frequency Properties of Soft Ferromagnetic Films on Cemented Carbide Substrates an Approach for Sensor Applications
|
|
| B2-1 |
Microstructure Investigation on CVD Ti1-xAlxN Hard Coatings
|
Elaboration and Characterization of (TI,AL)N Coatings Deposited by Thermal CVD for Protection in Severe In-service Conditions
|
Investigation of CVD-AlTiN Films with High Al Content
|
Microstructural Investigation of CVD Titanium Aluminium Nitride – Kappa Alumina Coatings
|
Deep Electron Microscopy Investigation of Ti1-xAlxN/TiCN Multilayer CVD Coatings
|
Some Guidelines for the Determination of Texture Coefficients in CVD α-Al2O3 Coatings
|
Hot Filament CVD Diamond and HIPIMS-Diamond Coating Technology on Cemented Carbide Substrates for Cutting Tool Applications
|
||
| D2 |
Magnetic Abrasive Finishing of Additively Manufactured Components for Biomedical Applications
|
Investigating Some New Coatings to Improve the Modular Junction of Total Hip Prostheses
|
Tribological Coatings on Titanium Alloy (Ti6Al4V) for Orthopedic Applications.
|
||||||
| D3 |
Osteochondral Tissue Regeneration into Porous PCL Scaffolds With and Without Chitosan Coatings of 98% or 80% Degree of Deacetylation
|
Vancomycin-Phosphatidylcholine Spray Coatings for Delivery of Antimicrobials from Implants
|
|||||||
| E1-1 |
Tribologically Induced Oxidation of High-purity Copper as a Function of Sliding Distance
|
Investigation on the Reason for Low Friction between Diamond-like Carbon Coating and Ti-6Al-4V under Fretting Conditions
|
Tribological and Wettability Evaluation of Magnetron Sputtered WS-C/F Coatings
|
Tribological Properties and Oxidation Resistance of WNX Thin Films at High Temperatures up to 500°C
|
Correlation between Evolution of Roughness Parameters and Micropitting of Carburized Steel Surfaces under Boundary Lubrication Condition
|
The Influence of Temperature on the Wear Mechanisms of a Cobalt-based Alloy Contact Subjected to Fretting: from an Abrasive Tribo-oxydation Process to the Glaze Layer Response
|
Coated Surface Wear Resistance Design by Comutational Modelling
|
Room and Elevated Temperature Sliding Wear Behavior and Mechanisms of a Cold Sprayed Ni-WC Composite Coating
|
|
| F2-3 |
Ultra-thick CrN/AlN Superlattice Coatings Deposited by a Combination of Plasma Enhanced Magnetron Sputtering and High Power Impulse Magnetron Sputtering
|
Deposition of DLC Coatings by HIPIMS to Arc Mixed Mode
|
Performance Improvements of Tungsten and Zinc Doped Indium Oxide Thin Film Transistor by Fluorine Based Mixing Plasma Treatment with a High-K Gate Dielectric
|
Effect Of Craters Formation On Deep Hardening Under Pulsed Electron Beam Treatment
|
Mechanical Property Evaluation of ZrCN Films Deposited by a Hybrid Superimposed High Power Impulse- Middle Frequency Sputtering System
|
||||
| G2 |
The Effects of Temperature and Gas Mixture Composition on the Microstructure and Tribological Properties of the Plasma Nitrocarburized DIN 100 CR6 Steel
|
Selected Aspects of Industrial Applications of Hydrogen Free DLC Coatings Deposited by CVAE
|
Erosion Resistant PVD Coatings for Gas Turbine Compressor Blades
|
Synthesis and Characterization of Ta-C, Hf-C and Ta-Hf-C Coatings Obtained by Cathodic Magnetron Sputtering in Reactive Conditions
|
Thin and Thick Coatings and Applications in Aerospace Industry
|
HNT-Containing Ceramic PEO Coatings for Active Corrosion Protection of Magnesium Alloys
|
|||
| TS3 |
Development of PVD Coatings by R2R on Basis of TI/AG, TI/ZN and TI/AG/ZN on Textile Fabrics
|
Coating of Plastic Components by Electron-beam Evaporation
|
Aspects of Coatings on Plastic products for Decorative and automotive parts.
|
Combined Impact and Sliding Testing for Evaluation of Surfaces on Different Materials
|
Interfacial Stability of the Aluminium-Polyimide Interface Against Thermal Treatments
|
||||