ICMCTF2017 Tuesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, April 25, 2017
1:50 PM 2:50 PM 3:50 PM 4:50 PM
A2-1
Property Comparisons of Air Plasma Sprayed and Dense Homogeneous Yttrium Disilicate
Performance of Vacuum Plasma Spray Bond Coatings
Predicting Microstructural Evolution in Aluminide Coatings during Manufacturing and Degradation in Service
Engineered Architectures of Gadolinium Zirconate/YSZ based TBCs Subjected to Hot Corrosion Test
Thermal Barrier Coatings: The Next Generation
Microstructure of Gas Flow Sputtered Thermal Barrier Coatings
Current Environmental Barrier Coatings Research at NASA
CMAS Infiltration Prediction for 7YSZ TBCs Deposited by EB-PVD
Oxidation Behavior of CrN, AlCrN, and AlTiN Cathodic Arc PVD Coatings
B1-4
Combinatorial Exploration of the High Entropy Alloy System Fe-Mn-Ni-Co-Cr
The Effect of Mo-Cu Cathode Composition on Thin Film Synthesis and DC Vacuum Arc Characteristics
Towards High-Rate Magnetron Sputter Deposition: Influence of Discharge Power on Deposition Process and Coating Properties
High Temperature Solid PVD Lubricants Based on Vanadium
Grain Size-Dependent Metastable Phase Formation
Nanoengineering Periodically Structured SiCu Thin Film Anodes for Rechargeable LIBs
Thin Film Metallic Glass: Novel Coating Providing High Toughness and Low Friction
B2-1
Combined Effects of Supersaturation and Stress for the Control of AlN Film Quality
Fabrication of Boron-doped Diamond Films on Cemented Tungsten Carbide
B4-2
Measurement of Residual Stress on Transition Metal Nitride Hard Coatings by Combining Average X-ray Strain Method and Nanoindentation
Investigation of the Tribocatalysis Mechanisms involved in the Extraction of Amorphous Carbon Boundary Films from Base Oils
Phase Stability and Strain Evolution in TiZrAlN Coatings During Annealing
Gas Inlet and Input Power Modulated Sputtering Molybdenum Nitride Thin Films
Transition Metal Nitrides Deposition by HiPIMS in DOMS Mode
Advanced HIPIMS Solution for R&D and Process Development
Determining of the Critical Loads of Transition Metal Nitrides on Steels
Tribocorrosion Behaviour of Nanocomposite TiSiCN Coatings Tested in PBS Solution
C2-3
High Dielectric Constant of Polymer-inorganic Nanocomposites as Gate Dielectrics for Organic Thin Film Transistor Applications
Different Nitridation Condition Influence NBTI in FinFETs
Analysis of Abnormal Transconductance in Body-tied PD SOI n-MOSFETs
Influence of the Ammonia Hardening on the Properties of Sol-Gel Thin Film Coatings
Miniaturized Shape Memory (SMA) Bimorph Actuators with Polymer Layers
Investigating Degradation Behaviors Induced by Hot Carriers in the ESL in Amorphous InGaZnO TFTs with Different Electrode Materials and Structure
E2-1
Cross-sectional Investigation of Microstructure and Mechanical Properties of Graded Ti(N,B) Coatings
Nanocrystalline Pt-Au MEMS Electrical Switches
Thin Film Metallic Glass: Novel Coating Providing High Toughness and Low Friction
Driving Force for the Texture Transformation of Thin Metal Films
Strength and Strain Hardening Behavior of Particle Strengthened Coherent Cu/Ni Multilayer Films
Indentation Induced Deformation and Damage in Metal-Ceramic Multilayer Coatings
Influence of Various Interlayers on Mechanical Properties of CrAlN Coatings on Tungsten Carbide Substrate
F2-2
HPPMS Deposition from Composite Targets: Effect of Two Order of Magnitude Target Power Density Changes on the Composition of Sputtered Cr-Al-C Thin Films
Adherent and Hard DLC Coatings Deposited by HiPIMS in Deep Oscillations Magnetron Sputtering (DOMS) Mode
Variation of Local Chemical Compositions of (Ti, Al)N Films on Inner Wall of Small Hole deposited by High Power Impulse Magnetron Sputtering
A Feasibility Study on the Large-area Graphene Growth by using High Power Impulse Magnetron Sputtering (HIPIMS)
F5
3D-Painted Metals and Alloys: A New Approach to Metal and Alloy Advanced Manufacturing
3D Printing of 2D Materials
Direct Laser Deposition of High Entropy Alloy Coatings on High Temperature Alloys
In-situ Impedance Spectroscopy Evaluation of Electrolytic Plasma Polishing Process for Stainless Steels
Sessions | Time Periods | Topics | Schedule Overview