ICMCTF2016 Tuesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, April 26, 2016
1:50 PM 2:50 PM 3:50 PM
Image-Based Modelling of TBC Thermal and Mechanical Properties using Sub-Micron Resolution X-ray Computed Tomography
The Effects of Temperature and Substrate Curvature on Residual Stress in Alumina Scales Beneath APS TBCs
Thermal Behavior and Mechanical Properties of Y2SiO5 Coatings after Isothermal Heat Treatment
Experimental Measurements of Thermal Barrier Coating Interfacial Fracture Toughness as a Function of Mode-Mix
Internal Stresses in Thermal and Environmental Barrier Coatings
Ytrria-rich TBCs as: Candidates for a CMAS Resistant Top Coat
The Behaviour of TBC System with Al2O3 Sol-Gel Intermediate Layer under Thermal Cycling
Amorphous Zr/Cu-Based Thin-Film Alloys Prepared by Magnetron Co‑Sputtering
Magnetron Sputtering Process for Homogeneous Inner Coating of Narrow Cylinders
Potential of Rotatable Sputtering
Influencing the Arc and the Mechanical Properties of the Weld Metal of GMA-Welding Process by Thin Film Coatings on Wire-Electrode Surfaces
Structure and Mechanical Properties of Nitrogen-containing Austenitic Manganese Coatings Deposited by Sputter PVD
The Densities and Corrosion Barrier Performance of Tantalum and Titanium Thin Films Deposited by DCMS and HiPIMS
Erosion and Self-Healing of Micro-architected Plasma-Facing Materials for Space Electric Propulsion
Development of Hard, Tough, and Thermally Stable Intermetallic Coatings
Toughness-Enhanced Coatings for Demanding High-Performance Tools
Ti4AlN3 Formation by Solid State Reaction of Substoichiometric Solid Solution (Ti0.52Al0.48)N0.45 Thin Films
Investigation and Optimization of the Tribo-mechanical Properties of CrAlCN Coatings using Design of Experiments
New Insights into Ion Implantation in Zno
TCO Grids Development for Semi-Transparent Thin Film Solar Cells
Microstructures and Optoelectronic Properties of Nickel Oxide Films Deposited by Reactive Magnetron Sputtering at Various Working Pressures of Pure Oxygen Environment
Control of Carrier Transport in Polycrystalline Ga-doped ZnO Transparent Conductive Films
Reactive Magnetron Sputtering of Zn-Sn-O Amorphous Oxide Semiconductors
Comparative Study of Sintered and Plasma Sprayed Indium Tin Oxide Coatings Deposited Using Full Face Erosion Planar and Rotatable Cathodes
Challenges in Evaluation of Wear, Corrosion and Tribocorrosion Behavior of Orthopedic Implants in invitro Conditions
Fretting-corrosion Behavior of Hip Implant Modular Junctions: Effects of Machining Lines
Process Parameter Interaction Effect on the Evolving Properties of Laser Metal Deposited Titanium for Biomedical Applications
Novel Approach of Tribological Improvement on MoM Hip Implant by Carbon-Derived Carbon (CDC)
The Effect of Adding Ag Nanoparticles on DLC Films on their Tribocorrosion Behavior for Prosthesis Applications
Tribological Properties of a-C:H:SiOx Coatings in Ambient and Simulated Body Fluids Environment
Low Temperature Carburised Austenitic Stainless Steel for Metal-on-metal Prosthetic Applications
Tribocorrosion Behavior of Biofunctional Titanium Oxide Films Produced by Micro-Arc Oxidation: Synergism and Mechanisms
Influence of the Chemical Surface Structure on the Nanoscale Friction of Nitrided and Post-oxidized Steel and Iron
Impact-Fretting Wear Response of a Nitrided 316L SS/304L SS Interface under Dry and Lithium/Bore Solution for Equivalent PWR Control Rods Sliding Conditions
Insights into the Mechanisms Unraveling Low Friction/Wear in Diamond – Metal Sliding Contacts
In situ Micro Tribology Experiments on DLC Coated and Uncoated Steel Samples
Low Friction Surfaces: ‘The-Deck-of-Cards’ Theory
The Effect of Heat Treatment Routes on the Retained Austenite and Tribomechanical Properties of Carburized AISI 8620 Steel
Aluminum Adhesion Buildup on PVD Coated Work Rolls during Hot Rolling
The Effect of Shot Peening on the Scuffing Resistance of Cu-Ni Austempered Ductile Iron
Plasma Synthesized Si Nanoparticles for Energy Storage and Conversion
Development of Doped Amorphous Carbon Nanocoatings for Easy-to-clean and Antibacterial Textile Application
Sputter Deposited Solar Selective Absorber Coatings
An Experimental Investigation of the Effects of Nanoparticles on the Mechanical Properties of Epoxy Coatings
Tin Particles Made by Plasma-Induced Dewetting
Metallic Zn Nanospheres, Semiconducting ZnO Nanoballoons, and Concentric Metal-semiconductor Zn/ZnO Nanospheres: Study of the Photoluminescence Mechanisms
Sessions | Time Periods | Topics | Schedule Overview