ICMCTF2016 Thursday Afternoon

Amorphous Carbon, DLC, and Carbon Based Nanostructured Composite Coatings - a Resume of Selected Thin Film Design and Process Approaches Towards High Performance Applications

Improvement of the Properties and the Adherence of the DLC Coatings Deposited using a Modified Pulsed-DC PECVD Technique and an Additional Cathode

Synthesis of DLC Coatings by HPPMS using Ar, Ne and He as Process Gases

Design and Industrial Applications of Functionalized DLC Coatings

Deposition of Si-Containing DLC by using Ultra-High Speed PECVD Employing Surface Wave Propagation of 2.45-GHz Microwaves

The Effect of Substrate Bias Voltage on Mechanical and Tribological Properties of Sputter-deposited Hydrogen-free Amorphous Carbon Coatings

The Fullerene Structure Control of Diamond-like Carbon Films with Super Low Friction

Thermo-physical Properties of Wear Resistant Hard Coatings

Micro-Slurry-Jet Erosion (MSE) Technique to Evaluate the Mechanical Properties of Hard Coatings

Characterization of Thermal, Mechanical and Tribological Properties of Fluoropolymer-based Composite Coatings

Aging Resistance (12 years) of Hard and Oxidation Resistant SiBCN Coatings

The Oxidation Behavior and Corrosion Resistance of Vacuum Annealed ZrN-Coated Stainless Steel

Relationship between Scanning Speed and Intermetallic Produced during Laser Metal Deposited TiC/Ti6Al4V Composite and its Effect on the Wear Resistance

Improved Corrosion and Wear Resistance of Laser Alloyed AISI 1015 Steel with Zn-Al-Sn Ternary Coatings

Microscopic Two Color Infrared Imaging of Reactions in Ball Milled Ni-Al Powders

Combustion Characterization of Nano Particle Reactive Materials Suspended in Polymer Binders for use in Additive Manufacturing

Thermite Enhanced Reactions in Ni-Al Ball Milled Powder Compacts

Porous Silicon and On-Chip Energetic Materials

Tailoring Material Reactivity using Architecture

Visible Light Emission from Silicon-based Thin Film Nanostructures

Effect of Al on the Optical Properties of (Cu, Al) Thin Films

Statistical Analysis of Nano-impact Tests on Coated Systems

Solid Particle Erosion Modeling of Graded Nanocomposite TiSiN Coatings

Time and Temperature Mechanical Properties Measurement of Titanium Nitride Thin Film with Different Process Parameters

Analytical Modeling of Residual Stresses in Multi- and Graded-Layer Systems

Investigation of Adhesion and Fatigue Properties of Micro-Arc Oxidation Coatings on AZ91 Magnesium Alloys

On the Plastic Deformation of Chromium-Based Nitride Hard Coatings Deposited by Hybrid dcMS/HPPMS: A Fundamental Study Using Nanoscratch Test

Residual Stress Gradient Measurement on Hard Coatings by Combining Average X-ray Strain (AXS) and Layer By Layer Methods

Realization of Macroscale Superlubricity through Graphene-nanodiamond Nanoscrolls

Graphene Oxide Membranes in Water: to Disintegrate or Not to Disintegrate?

Tuning Inorganic Thin Film Interface Properties using Organic Nano Molecular Layers

Deposition and Characterization of 2D Transition Metal Dichalcogenides

The Effect Of Ion Implantation on Chemomechanical Behaviour in the Low-Load Indentation Hardness of Ceramic Materials

Mechanical Properties of Candidate Materials for High Temperature Nanoindentation Tips

Strength and Fracture Toughness of Multilayer TiN/CrN Systems: Assessment of Bilayer Thickness Effects by Means of Ex-situ Tests on FIB-milled Micropillars and Microcantilevers

Fracture Behaviour and Internal Stress Gradients in GaN Heterostructures Studied by FIB Techniques

In Situ High-Temperature Small-Scale Fracture Mechanics of Hard Ceramic Coatings

Direct Comparison between High Temperature Nanoindentation Creep and Uniaxial Creep Measurements

Cracking in Brittle Materials During Nanoindentation

Characterization of Carbon-Based Materials with Combined In Situ Raman Spectroscopy and Triboindentation

The Effects of Core Confinement on the Mechanical Response of Al/a-Si Core-shell Nanostructures

Unique Thick Film Ceramic Microstructures by Aerosol Deposition

Ferromagnetic Films Deposited at Room Temperature by Aerosol Deposition for Microwave Integrated Circuitry

Room Temperature Deposition of Dense Ceramic Films by Granule Spray in Vacuum

Deformation and Consolidation of Alumina Particles - Basis for Aerosol Deposition, a Room Temperature, Solid-State Deposition Process

Nanocomposite Si-M Particles Produced by Plasma Spray PVD for High-Density Lithium Ion Batteries

Tribo-mechanical Properties of Fe₃Al-based Composite HVOF Coatings Containing Boride and Nitride Phases

Sliding Wear Behavior Of Wc-Ni Composite Coating Deposited By Cold Spray