ICMCTF2015 Tuesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, April 21, 2015 | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | 5:30 PM | ||||||||||
| A1-1 |
Solvothermally Densified Ceramic Coatings as Corrosion Protection for Boiler Tubes in Waste-to-energy (WTE) Plants
|
Thermodynamic and Kinetic Modelling for Predicting the Microstructural Evolution in Oxidation Resistant Coatings during High Temperature Exposure
|
Structure and Degradation Mechanisms of Pd-Pt-aluminide Bond Coatings for EB-PVD TBCs
|
Study of Oxide Scale Formed in Thermal Barrier Coating System on CMSX-4, CM 247 LC and PW1483 Alloys
|
Modelling the Influence of Alloying Elements on the Microstructrural Evolution in MCrAlY Coatings at High Temperatures
|
Interdiffusion between MCrAlY Bond Coats and Ni-base Single-Crystal Superalloys
|
Long-term Tests of Resistance of Laser Clad and Thermal Sprayed Inconel 625 Coatings to Hot Gas Corrosion in a Complex Atmosphere Containing HCl, SO2, and Ammonia
|
Synthesis of MCrAlYCcoatings via an Electrolytic Codeposition Process
|
||||||
| B1-2 |
Effect of Oxygen Incorporation on the Structure and Elasticity of Ti-Al-O-N Coatings Synthesized by Cathodic Arc and High Power Pulsed Magnetron Sputtering
|
Improvement of the Fatigue and Wear Resistance of the Nitride-based Coatings used in Forming Tool Applications
|
Influence of Composition on the Wear Properties of Boron Carbonitride (BCN) Coatings Deposited by High Power Impulse Magnetron Sputtering
|
Low Temperature In-situ Crystallization TiNi Shape Memory Thin Film Deposited by Magnetron Sputtering
|
Study on AlCrN Coatings Deposited by Modulated Pulsed Power Magnetron Sputtering for Lube Free Die Casting
|
Fabrication and Characterization of Nanolayered Single Element Nitride Coating: Case for TaN and HfN
|
High Transparency AZO film Synthesis by Magnetron Sputtering with Dual Confined High Density Magnetic Field
|
Bio-inspired Organic/Inorganic Multilayer Coatings Synthesized by RF Sputtering and Pulse Laser Deposition
|
The Effect of Substrate Pulsed Bias Voltage on Microstructure, Mechanical Properties and Coating-Substrate Adhesion of PVD Cr-Cu-N Nanocomposite Films
|
Reversing the Inverse Hardness-Toughness Trend using W/VC Multilayer Coatings
|
||||
| B4-2 |
Thermal Effects Influencing Stability and Performance of Coatings in Automotive Applications
|
Hydrogen Permeation Behavior of Nitride Coatings and Surface-nitride Stainless Steel
|
Influence of Target Composition and Bias Voltage on the Microstructure, Mechanical, Tribological and Thermal Properties of Arc Evaporated Ti1-xAlxN Hard Coatings
|
Plasma-sprayed Coatings: Identification of Elasto-Plastic Properties using Macro-indentation and an Inverse Levenberg-Marquardt Method
|
Measuring Elastic Constants of TiZrN Thin Films by Combining cos2α sin2ψ XRD and Laser Curvature Methods : Effect of Film Compositions
|
Cutting Performance and Wear Behavior of AIP Deposited AlCrN Based Coating
|
Mechanical and Tribological Properties of PVD Titanium-based Multilayer Coatings with Modulated Nitrogen-to-titanium Ratio
|
|||||||
| C2 |
Passive PT Symmetry in Organic Thin Films and Waveguides via Complex Index Modulation
|
Electrochemical Reduction of Methylene Blue Immobilized on Highly Ordered 3-dimensional Nanostructured Surfaces Studied by in-situ EC, QCM-D and Generalized Spectroscopic Ellipsometry
|
Copper Oxide Thin Films: Comparative Study of Spectroscopy Ellipsometry and Morphology for Gas Sensing Applications
|
Spectroscopic Ellipsometry Studies of n-i-p Hydrogenated Amorphous Silicon based Photovoltaic Devices
|
Insights into the Physical Properties of Organic Based Thin Film Electronic Devices by Using Light-Bias, Modulation, and Transient Measurement Techniques
|
X-RAY Scattering Methods for the Characterization of Layered Structures
|
Application of Spectroscopic Ellipsometry Data Analysis with Finite-Difference Time-Domain Method on 1D Periodic Structures
|
Structural, Optical and Electrical Characteristics of SrTiO3 Thin Films Deposited by RF Magnetron Sputtering
|
Determination of Low Absorption Levels in Dielectric Films using the R&T Direct Absorption Method
|
|||||
| F6-2 |
Designing Electrode Coatings to Enhance Life of Lithium-Ion Cells
|
The Shielding Effect of Fe2O3 Coated LiCoO2 Particles in Radiation Environment
|
Formation of Palladium Hydrides in Low Temperature Ar/H2-Plasma
|
Electrolytic Coating of Sn on Nickel Foam Support for Highly Reversible Anode for Li Ion Batteries
|
Development of Composite Electrode using Oxide Solid Electrolyte for all Solid State Lithium Ion Battery by Spark Plasma Sintering
|
Functionally Graded CuSi Thin Film Anode by Magnetron Sputtering for Lithium Ion Battery
|
Resistivity Analysis of BiTiO Thin Films Produced by Unbalanced Magnetron Sputtering
|
|||||||
| TS3 |
Reactive Gasless Nanocomposites: Structure – Reactivity Relationship
|
On the Micro/Nano-intermetallic Structures Formation During Steel to Aluminum Weld-brazing Process
|
Investigating the Compositional Limits of Self-Sustained Propagating Reactions in Sputter-Deposited Alx/Pty Multilayers
|
Growth of Atomically Smooth ZnO for Energetic ZnO/Al Nanolaminates
|
The Utilization of Metal/Metal Oxide Core-Shell Powders Optimizes the Dilution of Thermite Mixtures
|
Development of Free Standing, Flexible Tape Cast Energetic Material Films
|
Role of Trimethylaluminum and Cu at the Interfaces of Al/CuO Nanolaminates
|
Flash and Laser Ignition of Composite Al Particles with Dielectric Inclusions
|
An Atomic Scale Insight into Interface Layers Formation in Al/CuO Nanolaminated Thin Films: a Kinetic Monte Carlo Simulation of Deposition Process
|
Ignition and Combustion Characteristics of Metastable Intermolecular Composites for Material Joining Purpose
|
Effect of Nano-engineered Interfaces in Alumina-free Magnetron Sputtered AL-CUO Nanolaminates
|
|||