ICMCTF2015 Monday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, April 20, 2015
10:00 AM 11:00 AM 12:00 PM
B2-1
Chemical Vapor Deposition of Diamond Coatings on Cu-W Alloys
Advanced CVD-Diamond Coatings on Cutting Tools for Machining of CFRP
Surface Reactions during Ammonia-Plasma-Assisted Atomic LayerDeposition of Silicon Nitride
Microstructural Investigation of CVD Titanium Aluminium Nitride Multilayer Coatings
Amorphous Phase Mixed α-Al2O3 Hard Coatings by Plasma-Enhanced Chemical Vapor Deposition
Novel Transparent Silicon Nitride Film Synthesis at Room Temperature by Radical and Plasma Control with RF/UHF Hybrid Plasma Processes
C4-1
Synthesis of Porous Crystalline TiO2 Thin Films by Glancing Angle Reactive Magnetron Sputtering
Titanium Oxynitride as a High Capacity and High-Rate Anode Material for Lithium Ion Batteries
Observation of a Reversible Phase Transition in the Dielectric Function Response of Si Nanostructures upon Li Intercalation using Generalized Ellipsometry
Novel Concept Towards Highly Efficient Photoelectrochemical (PEC) Water Splitting
Stacking Faults in Mg-doped InN
Effects of Polishing Treatment and Chemical Bath Deposited Zinc Sulphide (ZnS) Thin films on Ferritic Stainless Steel 430
Modification of the Surface Properties of Metallic Alloys by Nanopulsed Laser Surface Melting Applications and Comprehension of Laser-Matter Interaction
E2-1
Mechanical Properties of Ni Based Coatings Deposited by Flame Spray Technique Varying Oxygen Flow
Study of the Hardness and Thermal Stability of the TiAlN Coatings with High and Low Aluminum Content
Structural, Tribological, and Electrochemical Properties of Plasma Nitrided Pure Titanium
Effect of Processing Parameters on Wear Resistance and Mechanical Properties of Thick ZrN Coatings on D2 Steel Deposited by Unbalanced Magnetron Sputtering
F5
Measurement and Control Of Interfacial Adhesion
Failure Behaviour of AZO/Ag/AZO Multilayers on Pen Substrates for Flexible Electronic Devices
Electro-mechanical Characterization of Directly Written Ag Patterns on Compliant Substrates for Optoelectronic Devices
Conformal Coating of Fibrous and Porous Substrates by ALD
Effects of Electrolyte Composition on the Process of Conversion of Aluminium Foil into Alumina Ceramics by Plasma Electrolytic Oxidation
TS1
Influence of Surface Topography and Roughness on Initial Formation of Biofilm
Phase Field Model of Biofilm-Flow Interaction
Nanomechanical and Microstructure Analysis of Extracellular Matrix of Immortalized Cell Line Y201 from Human Mesenchymal Stem Cells
3D Monolayer Stress Cytometry
TS6
Incorporation of Amine Moieties onto Ultra-high Molecular Weight Polyethylene (UHMWPE) Surface via Plasma Polymerization and Grafting of Allylamine
Modification of TiO2 Powder via Atmospheric Dielectric Barrier Discharge Treatment for High Performance Lithium-ion Battery Anodes
Development of Cold Atmospheric Pressure Plasma Jets for Material Processing and Surface Decontamination
Application of Atmospheric Pressure Plasma on PE for Increased Prosthesis Adhesion
Plasma Discharge Process for the Nitrogen-functionalization of CNTs and their Electrocatalytic Activities
Atmospheric Pressure Plasma Enhanced Recycled Wastes for High Performance Si-based Lithium Ion Battery
Coating Preparation on Mg and Corrosion Protection for Magnesium/Steel Coupling
Sessions | Time Periods | Topics | Schedule Overview