ICMCTF2014 Thursday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Thursday, May 1, 2014 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | ||||||||
| A2-1 |
Lifetime and Interaction of New Single and Double Layer EB-PVD Thermal Barrier Coatings with Volcanic Ash
|
Thermo-mechanical properties of calcium–magnesium alumino-silicate (CMAS) and CMAS infiltrated Electron Beam –Physical Vapor Deposited 7 wt. YSZ Thermal Barrier Coatings
|
Mitigation of Deleterious Effects of Environmental Deposits on Thermal Barrier Coatings
|
Degradation Study of 7 YSZ TBCs on Aero-engine Combustion Chamber Parts Due to Infiltration by Different CMAS Variants
|
Lifetime Influence on Different TBC Systems in Laboratory and in Practise
|
Effect of Process Parameters on MCrAlY Bondcoat Roughness and Lifetime of APS-TBC Systems
|
Protective Coatings for Gas Turbines
|
||||
| B4-4 |
Nanostructural Analysis of Magnetron Sputtered HfAlN Thin Films Grown on MgO(001) by Atom Probe Tomography
|
Investigations on the Diffusion Behaviour of Fe, Cr, and C in Arc Evaporated TiN- and CrN-based Coatings and Their Influence on the Thermal and Mechanical Properties
|
Mechanical and Tribological Behavior of Nanocrystalline Ni-W Coatings: Importance of Grain Size and Grain Boundary State
|
Microstructure-Related Depth-Gradients of Mechanical Properties in Thin Nanocrystalline Films
|
Corrosion Resistance of Zirconium Oxynitride/Zirconia Thin Film Growth by Spray Pyrolysis-nitruration and DC Sputtering Magnetron Unbalance
|
Structural Characterization of NbAlN Coating Deposited on AISI D2 Steel by TRD Method
|
Surface Hardening of IF Steel by Plasma Nitriding and Pre-shot Peening
|
Influence of Cu Additions on the Mechanical and Wear Properties of NbN Coatings
|
|||
| C3 |
A Novel Hierarchical Aluminum-doped Zinc Oxide Thin Film for Flexible Thin-film Solar Cells
|
Evaluation of TiN-Coated Aluminum Electrodes for DC High Voltage Electron Guns
|
Effects of N2O Addition During the Growth of ZnO Films using High-temperature H2O Generated by a Catalytic Reaction
|
Enhancement of Open-circuit Voltage on Organic Photovoltaic Devices by Al-doped TiO2 Modifying Layer Produced by Sol-gel Method
|
Thermochromics and Electrochromics for Energy Efficient Fenestration
|
Degradation Mechanism of ZnO thin Film for TCO of Flexible a-Si:H PV Module due to Moisture
|
Growth Mechanism of Silver Chloride Nano Wires by Electrodeposition Route
|
||||
| E3-2 |
Solid Particle Erosion Resistant Nanolayered CrAlTiN and Multilayered CrAlTiN-AlTiN Coatings
|
Microstructure and Properties of WC-Co(-Cr) HVOF Coatings Obtained from Standard, Superfine and Modified by Sub-microcrystalline Carbide Powders
|
Corrosion and Tribological Properties of Thick Diamond-like Carbon (DLC) Coatings Deposited using a Meshed-PIID Process
|
MoSx/WC PVD Coatings for Harmonic Drive Gears in Space Applications Characterized by Vacuum Pin on Disc Tests and XPS
|
Tribological Behaviour of the Non-Hydrogenated Diamond-like Carbon (DLC) Coatings Against Ti-6Al-4V: Effect of Surface Passivation by Alcohol
|
Diamond-like Carbon Nanocomposite Coatings to Mitigate Friction and Wear in Harsh Environments
|
|||||
| F6 |
Surface Modification of Electrode Materials for Lithium-ion Batteries
|
Experimental and Ab Initio Investigations on Textured Li-Mn-O Spinel Thin Film Cathodes
|
Production of Core–shell Copper/Tin/MWCNT Composite Electrodes for Li-ion Batteries
|
Influences of Feedstocks on the Processes and Microstructures of the Flame-sprayed SOFC Anode
|
Li Ion Technology for Vehicle Electrification
|
Improvement on the Corrosion Behaviour and Surface Conductivity of Coblast Coatings by Pack Cementation
|
|||||
| G5 |
Selective Wear Protection of Forging Dies through Localized Plasma Duplex Treatments
|
The Boriding Process in CoCrMo Alloy: the Presence of Indentation Size Effect and Fracture Toughness on Cobalt Boride Coatings
|
Pre-treatment of Polymer Based Substrates and High Rate Deposition of Silicon Dioxide Films Using a New Dual Magnetron Plasma Source
|
Influence of Nitriding Parameters on the Tribological Properties and the Adhesion of Ti- and Cr-based Multilayer Designs
|
The Powder-Pack Nitriding Process: Growth Kinetics of Nitride layers on pure iron
|
Influence of Substrate Pre-treatments on Residual Stresses and Tribomechanical Properties of PVD Coatings
|
Improvement of Coating Performance by Combining Different PVD/PACVD Technologies and Surface Treatments
|
||||
| TS5 |
Erosion Characteristics of AlCr Composite Cathodes in Cathodic Arc Plasma with Inert and Reactive Gas Atmospheres
|
Plasma Characteristics of High Power Impulse Plasma Source (HiPIPS) For Low Temperature Diamond Growth
|
Characterization of Transport of Sputtered Particles from Target to Substrate in Multiple Frequency Driven Discharges
|
Status and Challenges in Electrical Diagnostics of Processing Plasmas
|
Study of Substrate Heating during Reactive Magnetron Sputtering
|
Simulation of Magnetron Discharges and Modeling Approaches Towards HiPIMS
|
Time-resolved Plasma Diagnostics in Reactive High-power Impulse Magnetron Sputtering Discharges
|
Measuring and Controlling the Plasma in Pulsed Laser Deposition of Thin Films
|
|||