ICMCTF2014 Monday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, April 28, 2014
10:00 AM 11:00 AM 12:00 PM
B1-1
Composition Control in Zr-Cu-Ni-Al Thin Film Metallic Glass for Improvement of Mechanical and Anti-microbial Properties
Low-Temperature, High-Rate Growth of Dense, Hard and Stress-free Refractory Ceramic Alloy Coatings
Estimating Metastable Phase Formation During Magnetron Sputtering
Microstructure and Superhardness Effects of VC/TiC Nanoscale Multilayer Films
Recent Developments in Industrial Scale Pulsed Laser Deposition Technology for Thin Films
B5-1
Hard Multifunctional Hf-B-Si-C Films Prepared by Pulsed Magnetron Sputtering
Influence of Hf on the Structure, Thermal Stability and Oxidation Resistance of Ti-Al-N Coatings
Growth of Hard Amorphous Ti-B-Si-N Coatings by Cathodic Arc Evaporation
Structure, Oxidation Resistance and High Temperature Tribological Properties of CrTiAlN Coatings
Growth of AlYB14 Thin Films by HPPMS
C1
Challenges and Perspectives of Optical Interference Coatings: FromTelecom and Space to Security and Consumer Electronics Applications
Assessment of the Mechanical Properties of Optical Coatings by in situ Real-time Approaches
Low Temperature Deposition of Thermochromic VO2 Optical Coatings Using HiPIMS
The Characteristics of Heavily Ga-doped ZnO Films with High Carrier Concentration for use in Plasmonics
Smart Optical Coating Systems for Energy Efficient Building Envelopes
Potential Impact of Ambient Gases and Oxygen Partial Pressure on Structural, Hydrophobic, Optical and Electrical Property of Nanostructured HfOxNy Film
E1-1
Contact and Friction of Rough Adhesive Surfaces
Wear Phenomena of ta-C Under Ultra-low Friction Conditions
Temperature-induced Low Friction of Sputtered Si-containing Amorphous Carbon Coatings
The Aging and Temperature effects of DLC Coatings
Nanoscale Sliding Friction Phenomena at the Interface of Diamond-like Carbon and Tungsten
Scratch Testing for Diamond-like Coatings Evaluation at Micro and Nano-scale
Failure Mechanisms of DLC Coated Ti-6Al-4V and CoCr Biomedical Materials under Cyclic High Combined Contact Stresses
F5
Electromechanical Properties of ZNO:Al Thin Films on Polymer Substrates for Optoelectronics Applications
Low Temperature Titanium Dioxide Diffusion Barrier Layers on PEN Using Spatial Atomic Layer Deposition
Stretch to the Limit: Ductility of Thin Metal Films on Polymer and Elastomer Substrates
Small Diameter Circular Ion Sources for Surface Engineering of Polymers
Mechanical Design of Organic Light Emitting Diodes on Polymer Substrates
On the Response of Ti-6Al-4V and Ti-6Al-7Nb Alloys to a Nitron-100 Treatment
A Comparison of Nanoindentation Pile-up in Bulk Materials and Thin Films
G4
Nobel Wear Resistant Coating System for AHSS Stamping Die
Development of (Cr,Al)ON Coatings using Middle Frequency Magnetron Sputtering and Investigations on Tribological Behavior against Polymers
Tailoring Wear Resistant PVD Coatings for Metal Cutting Applications
Investigation of Suitability of CVD Diamond Thick Film Tool Coatings for High Performance Cutting of Ti6Al4V Super Alloys
Technology Trends in Coated Cemented Carbides for High Demanding Applications CVD, PVD, Cutting Tool
Sessions | Time Periods | Topics | Schedule Overview