Oxidation Failure of TBC Systems: An Assessment of Mechanisms

The Effects of Ni:Co Ratio on the Phase Stability and High-Temperature Corrosion Resistance of (Ni, Co)CrAlY Alloys and Coatings

The Development of New Bond Coat Compositions for Thermal Barrier Coating Systems Operating in Industrial Gas Turbine Conditions

The Effect of Composition on the Durability of β-phase Bond Coats

Structure and Cyclic Oxidation Resistance of Pt, Pd and Pt/Pd Modified Aluminide Coatings on CMSX-4 Superalloy

Compositional Effects on the Hot Corrosion of β -NiAl Alloys

Thermal Cycling Behavior of TBC Systems with Doped Pt-rich γ-γ' Bond Coatings Made by Spark Plasma Sintering (SPS)

Coating Performance on Low Re Superalloy

Type I Hot Corrosion of PGM-Modified NiAl Bond Coat

Cylindrical Magnetrons Sputter Deposition of Ti-Si-C-N Nanocomposite Coatings on Inner Surface of Cylinders

Arc Deposited Ti-Si-C-N Hard Coatings from Ternary Ti₃SiC₂ Cathodes

Atomic Scale Studies of Nanocomposite Coatings with Atom Probe Tomography

Structural and Mechanical Property of (TiCrAlSi)N Coating with Different Si Contents

Seed Layer Influence on the Texture, Orientation and Piezoelectric Properties of Pulsed-DC Sputtered AlN Thin Films

Industrial-Scale Sputter Deposition of Photocatalytic Active Titania (TiO₂) and Thin Film (YSZ/CGO) for Solid Oxide Fuel Cells

Antibacterial Activity of TiO₂ Coatings Deposited by CAE-PVD

Preparation of BiFeO₃/LaNiO₃ Multiferroic Oxide Superlattice Structure Prepared by RF Sputtering

Evolution of the Structure and Optoelectrical Performance of ZnO Thin Films Deposited by DC Magnetron Sputtering after Post Deposition Annealing Treatments

Characterization and Piezoelectric Properties of Reactively Sputtered (Sc, Al) N Thin Films on Diamond Structure

Phase Diagram Based Design of a Spinel-Corundum Coating

Controlled Phase Transformation for Local Property Design in MAX Phase Coatings

Quantum Design of Hard Boron-Rich coatings

DFT Combinatorics by Extending the Rule of Mixture to Sub Unit-Cell Level

Growth and Characterization of Single-Crystal V_xW_1-xN(001) Thin Films

Ductility Enhancement in Transition Metal Nitrides by Alloying and Valence Electron Concentration Tuning

Microstructural Study and Mechanical Properties of TiC/C Composite Coatings Deposited by hybrid PVD/PECVD Process

In-Situ XRD Investigations of Interface Reactions in Nanoscale Cr/ta-C Multilayers

Fabry-Perot Based Layer Systems with Embedded Public, Hidden and Forensic Information for Anti-Counterfeiting Applications

Simulation of a Variety of Applications for Complex Coating Structures

Analysing Solid Surfaces by FT-IR Imaging ANR AFM-Raman-Spectroscopy

X-Ray Fluorescence as a Powerful Tool for the Study of Chemistry of Thin Films

Electrochromic Properties of Nanocrystalline MoO₃/V₂O₅ Composite Thin Films

Nitrogen-Doping Induced Changes in the Microstructure and Optical Properties of Nanocrystalline WO₃ Thin Films

Effect of Growth Temperature on the Structure, Electrical and Optical Characteristics of Sputter-Deposited Y₂O₃ Thin Films

Characterization of Nanometer Films by X-Ray and EUV Reflectometry

Morphological Evolution and Optical Characterization of ZnO Thin Films on PET and Glass Substrates by RF-Sputtering Technique

Enhanced Photoluminescence from Zn_0.55Cd_0.45S:Mn/ZnS Core Shell Nanostructures

Environment Sensitivity and Film Stability of InGaZnO TFT with Annealing Temperature Dependence

Structural and Optical Properties of Chlorinated Plasma Polymers

Atmospheric Pressure Plasma Treatment of Polymers for Ink-Jet Deposition of Flexible Solar Cell Platforms

Investigation on the Discharge Formation Mechanisms and Surface Analysis of SiO₂-Like Layers on Polymers Synthesized Using High Current Dielectric Barrier Discharge at Atmospheric Pressure

Surface Modification of Inks, Coatings and Adhesives - The Interfacial Effects

Effects of Coating Morphology on In-Situ Impedance Spectra of Plasma Electrolytic Oxidation Process

The Effect of Current Mode and Discharge Type on the Corrosion Resistance of Plasma Electrolytic Oxidation (PEO) Coated Magnesium Alloy AJ62.

An Integrated Microwave Atmospheric Plasma Source

Nanocoating System with Focused ICP Atmospheric Plasma Torch for Anti-Reflective Coating

Plasma Characteristics of Hollow Cathode Discharge in Plasma Ion Implantation of Slender Bore

Nanocomposite (Ti,Cr,Al,Si)N Coatings for Hard Machining of PM High Speed Steel

Substrate Surface Etching Effects on Machining Performance of Diamond-Coated Cutting Tools

Influence of Edge Micro-Geometry and Coating Design on the Drilling of Titanium Alloys with Carbide Drills

Coating and Tool Wear in Composite Machining

Fatigue Behavior of TiN Coating on WC-Co Cemented Carbides

Improved Cutting Processes of Austenitic Steels with γ-Alumina Based PVD Coating Systems

An Investigation into the Tribological Performance of PVD Coatings on High Thermal Conductivity Cu Alloy Substrates and the Effect of an Intermediate Electroless Ni-P Layer Prior to PVD Treatment

Mechanical Properties of Partially Oxidized Silicon Nitride Films Deposited by RF Reactive Magnetron Sputtering

Carbon Based Coatings for Machining of Aluminum and Magnesium Alloys