ICMCTF2011 Tuesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Tuesday, May 3, 2011
1:30 PM 2:30 PM 3:30 PM 4:30 PM 5:30 PM
B1-2
Growth Morphology and Corrosion Resistance of Magnetron Sputtered Cr Films
Fundamental Studies on the Deposition of Nanocrystalline Diamond (n-D) Films by Means of Pulsed Laser Deposition
Oxidation and Degradation of Nitride Thin Films at High Temperature under Controlled Atmosphere
Effects of Pulsed Laser Irradiation of As-Deposited c-BN-Films using Photons of 157 nm Wavelength
High Power Impulse Magnetron Sputtering of Niobium in Non-Reactive and Reactive Gas Environments
Barrier Capability of Reactively Sputtered TaxZr1-xN Films with Slight Ta Addition Against Copper Diffusion
The Influence of Substrate Biasing on the Crystal Orientation of γ-Al2O3 Films
Target Erosion Effects in Reactive Pulsed DC Magnetron Sputtering of Amorphous and Crystalline Alumina
Thermal Stability of Magnetron Sputtered Alumina Coatings with Crystalline Metastable Structure
Effect of Seed Layer Composition on the Structure of Arc-Evaporated High Al2O3 Containing (Al,Cr)2O3 Hard Coatings
Face-Centered Cubic (Al1-xCrx)2O3 Thin Films: Deposition, Characterization, and Heat Treatment Studies
Synthesis of Free Standing Al-Cu Intermetallics by Cathodic Arc Plasma Treatment
B3
Growth of Bi5Fe0.5Co0.5Ti 3O15 Thin Films by Pulsed Laser Deposition
Nanoparticle Fabrication by Through Thin Film Ablation
Laser-Deposition and Characterization of Amorphous Thermoelectric Films
Multi-Beam, Multi-Target Pulsed Laser Deposition: Beyond Single Film Deposition
Capacitive Properties of x BaTiO3-(1-x) BiScO3 Thin Films Fabricated by Pulsed Laser Deposition
Attempt to Synthesize a Ti3SiC2 Coating by Pulsed Laser Deposition of a Ti-Si-C Multilayer Structure
Pusled Laser Deposition of Csl, TiC, and HfC Coatings for Field Emission Cathodes
Growth and Characterization of SBN60:Ce Thin Films
Structural and Compositional Control of BCN Films in PLD-Based Deposition Processes
Bonding Structures, Mechanical Properties and Biological Behaviors of CNx Films Prepared by Ion Beam Assisted Deposition and Laser Induced Arc Deposition
C2/F4-3
Ultrathin Metals – a New Approach for Transparent Conductive Films
Energy Band Lineup of Transparent Conducting Materials and High Efficient Electrodes for Organic Semiconductors
Quality Improvement of Organic Thin Films Deposited on Vibrating Substrates
Investigation of the Gate-Bias Induced Instability for InGaZnO TFTs Under Dark and Light Illumination
Effect of N2O Plasma Treatment on the Improvement of Instability Under Light Illumination for InGaZnO Thin-Film Transistors
Surface States Related the Bias Stability of Amorphous In-Ga-Zn-O Thin Film Transistors Under Different Ambient Gas
Hot Carrier Effect on Gate-Induced Drain Leakage Current in n-MOSFETs with HfO2/TixN1-x Gate Stacks
Pulse Laser Deposition and Characterization of V2O5/Mn3O4 Composites Thin Films for Supercapacitor Application
Chemiresistive Chlorine Gas Sensor Based on Spin Coated Copper(II) 1,4,8,11,15,18,22,25-Octabutoxy-29H,31H-Phthalocyanine Films
D3
Metal Oxide Coatings for Dental Implants: What is Important?
Synthesis, Characterization and Performance of Silver Nanoparticle Coatings on Bioimplants
Tribo-Corrosion Mechanisms of Ti Based PVD Coatings on Y-TZP Dental Implants
Biotribolayer Formation in Metal-on-Metal Hip Prostheses- a Beneficial Coating Process?
Fabrication of Superhydrophobic Surfaces on Stainless Steel Substrates for Potential Biomedical Applications
What is the Role of Lipopolysaccharide (LPS) on the Tribocorrosive Behavior of Titanium in Dentistry?
Bio-Tribological Properties of UHMWPE Against Surface Modified Titanium Alloy
E1-2
Developing Coatings for Increased Operational Life in Gears
Understanding Lubrication Mechanism of Novel Boron-Based Lubricant Tested on ta-C Coating for Automotive Applications
Influence of the Lubricant on the Frictional Behaviour of Amorphous Carbon Coatings Sliding Against Steel
Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications
Space Tribometers: Experiments on Orbit
Ultra-Low Carbon (ULC) Steel Modified by Triode Plasma Nitriding and PVD Coating: Effects on the Micro-Abrasive Wear Behavior
Application of the Friction Energy Density Approach to Quantify the Fretting Wear Endurance of MoS2 Solid Lubricant Films: Influence of Temperature and Frequency
The Onset of Plastic Yielding in Coated Spherical Contact
Tribological Properties of Laser Surface Texturing and Molybdenizing Duplex-Treated Steel
TS2
Development of Li-Mn-O Thin Film Cathodes for Lithium-Ion Batteries by Magnetron Sputtering and Laser-Assisted Structuring and Annealing
Influence of a Coating on the Oxidation Resistance and Resistivity of Several Chromia Former Alloys for High Temperature Vapor Electrolysis Application
Deposition and Post-Annealing of Ceria Films Deposited by Pulsed Unbalanced Mangetron Sputtering
Sputtered Lanthanum Silicate Electrolytes for SOFCs
Nanostructured Titania Materials for PEM Fuel Cell Water Management
Electrolytic Co-Deposition for Synthesis of (Mn,Co)3O4 Spinel Coatings to Protect SOFC Interconnect Alloys
Development of Low Cost Protection Coatings for SOFC Interconnect Applications
Lithium Insertion into Vertically-Aligned Carbon Nanotubes During Growth
Sessions | Time Periods | Topics | Schedule Overview