ICMCTF2011 Thursday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Thursday, May 5, 2011
1:30 PM 2:30 PM 3:30 PM 4:30 PM 5:30 PM
A2-1
Effect of (CMAS-Assisted) Sintering under Service Conditions on the Thermo-Mechanical Stability of Plasma-Sprayed TBCs
Degradation of YSZ Thermal Barrier Coatings by CMAS Infiltration
The Effect of Volcanic Ash on Sintering of Plasma Sprayed Thermal Barrier Coatings
Mechanical Charactersation of Thermal Barrier Coatings After Thermal Treatments
Interfacial Strength Measurement of Oxidized EB-PVD Thermal Barrier Coatings by the Laser Shock Adhesion Test (LASAT)
Observations of Ferroelastic Switching by Raman Spectroscopy
Factors to Consider in Cyclic Oxidation Testing of Thermal Barrier Coatings with MCrAlY-Bondcoats
Characterization of the Alumina Scale Formed on Coated and Uncoated Doped
Laser Cycling Exposure of Thermal Barrier Coatings on Copper Substrates
Processing, Repairing and Cyclic Oxidation Behaviour of Sol-Gel Thermal Barrier Coatings
B5-2
Wear-Resistant PTFE Based Nanocomposites
Comparison of Different Bionic Structures Coated with CrAlN
Surface Modification of Nanostructured NiTi Shape Memory Alloy Thin Films Using Various Passivation Layers by dc Magnetron Sputtering
Mechanical Properties, Tribological and Corrosion Resistance Evaluation of Cathodic Arc Deposited ZrN/CrN Multilayer Coatings
High Temperature Crystallisation of Cr2AlC MAX-Phase Coatings Sputter-Deposited at Room Temperature
Recent Advances in Transition Metal Nitride–Based Nanostructured Hard and Superhard Coatings
Comparison of Superhard and Superelastic Ti-Based Nanocomposite Erosion Resistant Coatings on Ti-6Al-4V Substrates Prepared by PECVD
Effects of Nanostructure Formation on the Fundamental Physical Properties of Epitaxial Hf1-xAlxN(001) Alloys
E2-2
Fatigue Damage in Ultra Thin Cu Films
Strain-Rate Sensitivity of Strength in Macro-to-Micro-to-Nano Crystalline Nickel
Strain Rate Effects on Coated Surfaces' Response and their Film Fatigue Fracture: An Investigation by a Novel Impact Tester with Modulated Repetitive Force
Microstructural Analysis of the Failure Mechanisms of Amorphous Carbon Coating Systems in Load-Scanning Tests
A Route to Avoid Thermo-Mechanical Fatigue Damage in Al Thin Films
Evaluation of Mechanical Properties in Cu Thin Films Under Various Substrate Conditions by Molecular Dynamics Simulation
Comparison Titanium and Zirconia Dental Implants’ Stress Analysis Using Finite Element Method
Effect of Nitrogen Flow Ratio on Microstructure and Property of Ta-Ti-N Thin Film by Reactive Sputtering of Ta-Ti Target
Mechanical Properties of Vapor Deposited Polyimide
Elastic Properties of Metastable Mo1-xSix Alloys: A Brillouin Light Scattering Study
The Effect of Film Thickness Variations in Periodic Cracking: Shear Lag Analysis and Experiments
Optimized Adhesion Strength of TiSiN Films Deposited by a Combination of DC and RF Sputtering
F1-2
Fabrication of Aluminum Nanodot Assisted Growth of Nanoroots for Application in Amorphous/Crystalline Silicon Composite Thin Film Solar Cells
Platinum Doped Molybdenum Oxide Nanowires Alcohol Gas Sensor by Atomic Layer Deposition
Nanorods, Nanopipes, Nanosmiles
Effects of Temperature and Pulse Mode on Nanoporous Anodic Aluminum Oxide Film by Potentiostatic Anodization
Epitaxial Si Layer Formed on ZrB2 Thin Films - Silicene?
Synthesis of Bioactive NaHTi3O7 Films on Ti-Coated Si by a Hydrothermal - Galvanic Couple Method
Amorphous Phases and Crystallization Behaviour of Sputtered Fe1-xCx Films with x Ranging between 0.32 and 0.50
Frost Reduction on the Micro/Nano Structured Superhydrophobic Aluminium Surface
Micro/Nanostructured Surfaces of a-C:H:F Films with Anisotropic Properties
Correlation Between Plasma and Properties of Cr2AlC MAX Phase Coatings
F2-1
High Power Pulsed Magnetron Sputtering: a Review of Magnetron Ion Sputtering
A Two-Zone Model for High-Power Pulsed Magnetron Sputtering Discharges
Temporal Evolution of the Radial Plasma Emission Profile in HIPIMS Plasma Discharge
The Influence of Pulse Arrangement and Off-Time Between Positive and Negative Pulse in Bipolar HIPIMS
A Study on the Deposition Rate of Modulated Pulse Power (MPP) Magnetron Sputtering of Metallic Thin Films
The Effect of Various Deposition Parameters on the Phase of Tantalum Thick Films Deposited by Modulated Pulse Power Magnetron Sputtering
Control of the Magnetic Field for HiPIMS Process Optimization
TiAlN Coatings Grown by HIPIMS
Titanium Aluminum Nitride Sputtered using HIPIMS Technology
G6
Current and Future Applications of HIPIMS
Comparison of Hard Nitride Coatings Deposited by Industrial Scale AIP and HIPIMS Equipment
Hybrid PVD Industrial Deposition Equipment for R&D Purposes
Advantages of New Generation of Superior Arc Management Circuity
PVD Systems and Technology for Dedicated Hard Coatings: Challenges and Solutions
Laser-Arc-Module System Combined with a Novel Filtering Unit for Industrial ta-C Coating of Parts and Tools
InlineCoaterâ„¢ 300: A New PVD System for Fast Research and High Volume Production
PD
Superhard Transition Metal Diboride Coatings
Intelligent Self-Healing Corrosion Resistant Vanadia Coating of Flower-Like Morphology for AA2-24 and Novel Magnesium Alloys
Life Time Analysis of MCrAlY Coatings for Industrial Gas Turbine Blades (Calculational and Experimental Approach)
Development of Photonic Platforms from Hybrid Sol-Gel Thin Films
Vertical Growth of Carbon Nanotubes on Bulk Copper Substrates for Charge Storage Applications
Thickness Ratio Calculation of Bi-Layer TiNi Alloys to Enhance Shape Memory Behavior using Stress-Strain Properties of the Individual Thin Films
Sessions | Time Periods | Topics | Schedule Overview