ICMCTF2011 Monday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, May 2, 2011
10:00 AM 11:00 AM 12:00 PM
B2-1
Mild Chemistry as a Strategy for the Preparation of Metal-Containing Films
Deposition of Cobalt Oxide Thin Films by PECVD for Catalysis Application
Polymeric Barrier Coatings via Initiated Chemical Vapor Deposition
B4-1
Comparative ab Initio and Experimental Study of Ti-Al-N, Zr-Al-N and Hf-Al-N
The Effect of Elastic Anisotropy on the Spinodal Decomposition in TiAlN: a Phase Field Study
Effect of Internal Stress on Cutting Performance of Coated Carbide Tools
In-Situ Measurement of Residual Stresses Developed During Triode Magnetron Sputtering Film Depositions with Step-Variation of Substrate Bias
Low-Temperature Plasma Nitriding of Ti-6Al-4V: Microstructural Characterization and Mechanical Properties
C1
Investigations of Diffusion Behaviour in Dielectric Coatings
Electrochromic Performance of Hybrid Tungsten Oxide Films with Multiwalled-CNTs Additions
Opto-Electronic Properties of Graphene Oxide Thin Films
Effect of Crystallinity and Oxygen Vacancy on Photocatalytic Properties of TiO2 Thin Films
Structural and In-Depth Characterization of Variable Refractive Index Chromium-Silicon Mixed Oxides Produced by Reactive Ion Beam Mixing of the Cr/Si Interface
D1-1
Nanoscale Engineering of Biointerfaces via Parylene Coatings
Enhance Surface Reactivity of High Strength Biomedical Ceramics
SiNWs-Stimulated Human Adipose Derived Stem Cell (hADSC) Growth Behavior
Vertically Aligned Carbon Nanotube Arrays and Their Application as Biological Scaffolds for Stem Cell Growth
Controlling the Bioavailability of Silver Ions with a Nanocomposite Gradient Coating Produced in a Continuous Low-Pressure Plasma Process
E3-1
Influence of Nanocrystalline Diamond Concentration on DLC Tribomechanical Characterizations
Effect of Diamond Nanoparticles Addition and Test Conditions on Tribological DLC Films Properties for Space Applications
The Influence of Bilayer Period and Thickness Ratio on the Mechanical and Tribological Properties of CrSiN/TiAlN Multilayer Coatings
Microstructure, Scratch and Wear Behavior in Thick Ti-Si-C-N and Ti-Al-V-Si-C-N Nanocomposites
Design and Deposition of Amorphous Carbon Nanocomposite Coatings for Tribological Application
Improvement in the Resistance to Corrosion and Tribo-Corrosion of 301 Stainless Steel and Ti-6Al-4V Substrates Induced by Silicon-Based Multilayer Coatings
F6
Comparisons of the Mechanical and Tribological Properties of Ceramic Coatings on Glass and Polymeric Substrates
X-Ray Mechanical Properties of Metallic Thin Films Supported by Polyimide Substrates Studied under Controlled Biaxial Loading
Film Compliance and Constrained Yielding Effects on Interfacial Failure in Polymer-Metal Thin Film Structures
In situ Synchrotron X-Ray Strains Measurement in Film/Compliant Substrate Composites During Continuous Mechanical Tests
Paraffin Wax Passivation Layer Improvements in Electrical Characteristics of Bottom Gate Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistors
TS4-1
Strain Mapping in Nanostructures and Thin Films by Dark-Field Electron Holography
Electronic Structure Investigation of Amorphous CrCx Films
Electrical and Structural Properties of Ultrathin Polycrystalline and Epitaxial TiN Films Grown by Reactive Magnetron Sputtering
On X-Ray Diffraction Study of Stresses and Preferred Grain Orientations in Thin Films - Specific Non-Routine Cases
Information Depth of Mono-Atomic and Poly-Atomic Primary Ions in Secondary Ion Mass Spectrometry (SIMS): Fundamentals and Applications
XPS on Ar Atoms to Determine Local Structures of Thin Films Prepared by Magnetron Sputtering and PECVD
Sessions | Time Periods | Topics | Schedule Overview