ICMCTF2009 Thursday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Thursday, April 30, 2009 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | |||||||||
| A3-1 |
Toughening Mechanisms in 7YSZ Thermal Barrier Coatings
|
Nondestructive Microstructural Characterization of Thermal Barrier Coatings by Laser Flash Technique
|
Recent Results on Advanced Thermal Barrier Coatings
|
The Relation Between Morphology, Phase and Thermal Conductivity Changes in the Thermally Loaded EB-PVD TBCs
|
The Behavior of High-Purity, Low-Density Air Plasma Sprayed Thermal Barrier Coatings
|
Thermo-Mechanical Properties and Gradient Testing of Thermal Barrier Coatings Subject to Spallation Due to CMAS (Calcium-Magnesium-Alumino-Silicate) Penetration
|
Effect of Low Level CMAS Attack on EB PVD TBCs
|
The Role of Crystallization in Arresting CMAS Infiltration into TBCs
|
Electrophoretically Deposited Alumina as Protective Overlay for Thermal Barrier Coatings Against CMAS Degradation
|
Dependence of Microstructure and Mechanical Properties with Starting Powder Morphology in Zirconia-Based Thermal Barrier Coatings
|
||
| B6-2 |
Metal Carbide/Amorphous C-Based Nanocomposite Coatings for Tribological Applications
|
XPS Analysis of Binary and Ternary TiC-Based Alloy and Nanocomposite Coatings
|
Fabrication and Tribological Properties of Composite Coatings Produced by Lithographic and Microbeading Methods
|
Microstructures and Corrosion Resistance of Pulsed DC Reactive Magnetron Sputtered nanocomposite Zr-Si-N Thin Films
|
Hard and Decorative Coatings Based on Al-N + Au Nanocomposite Structures
|
Microstructure – Property Relationships in Nitride-Based Coatings on Steel Substrates Prepared by Pulsed Laser Deposition
|
Chromium-Aluminum Oxide Coatings Deposited by Reactive Magnetron Sputtering
|
|||||
| C1 |
Unusual Optical Thin Film Solutions Based on Advances in Materials and Deposition Processes
|
Thermal Stability of SiOxNy Thin Films with Tailored Refraction Index: Microstructural, Chemical and Mechanical Properties
|
Improved Contrast and Reflectivity of Near Normal Incidence Reflective Mjltilayer Optics for FLASH and Next Generation Soft X-ray Lithography
|
Multi-Layer Dielectric Coatings and Processing for Production of Optical Gratings on Large Substrates
|
Visible Light Photocatalysis of N-Doped TiO2 Films Prepared by Reactive Sputtering Using Air/Ar Mixtures
|
Low Temperature HIPIMS Deposition of AZO Coatings on Polymeric Web
|
Fabrication of ZnO Thin Films by Atomic Layer Deposition Using Interrupted Flow-Rate Method
|
|||||
| E3-1 |
Friction Behavior of Nanocrystalline Diamond Coatings at Variable Sliding Speeds
|
Tribology of Deuterated Diamond-Like Carbon Films : An Imaging TOF-SIMS Study
|
Super-Low Friction of Carbon-Based Coatings in Nitrogen Gas
|
Tribological Behavior of DLC Coated Spinal Disk Implants
|
Tribological and Mechanical Properties of Nanostructured Hydrogenated Amorphous Carbon and Titanium Diboride Films
|
When and Why a-c:H Films are Hydrophobic?
|
Friction and Wear Behavior of Hydrogenated Amorphous Diamond-Like Carbon (a-C:H) by Reactive Magnetron Sputtering in Water Environment
|
Water Adsorption on Phosphorus Carbide Thin Films
|
Measured and Simulated Wear and Friction Maps of DLCH20% and DLCH35% Films
|
Synthesis and Characterization of Nanocomposite and Nanolaminate Multilayers by High-Power Ion Beam Ablation*
|
Wear-Resistant and Low-Friction Diamond-Like-Carbon (DLC)-Layers for the Wood Machining Industry
|
|
| G2-1 |
Atmospheric Plasma - Cleaning, Activation and Coating of Materials Surfaces by Openair® Plasma
|
Low Temperature Reactive Magnetron Sputtered nc-Ti(N,C)/a-C:H Coatings for Automotive Applications
|
Gas Flow Sputtering - An Approach to Coat Complex Geometries and Non-Line-of-Sight Areas
|
Thick Plasma Enhanced PVD Coatings for Weapons Applications
|
Enabling Lightweight, High Load Aero-Bearings
|
|||||||
| H2-2 |
Modulated Pulse Power Sputtered Chromium and Chromium Nitride Coatings
|
Physical Properties and Potential Applications of High Power Impulse Magnetron Sputtering Plus (HIPIMS+) Deposited Chromium Nitride and Titanium Nitride Coatings
|
Low Friction CrN/TiN Multilayer Coatings Prepared by a Hybrid HIPIMS/UBMS Process
|
Industrial-Scale Deposition of Highly Adherent CNx Films on Steel Substrates
|
Development of Ready to use Cr2AlC Max-Phase on Complex Geometries
|
Impact Behavior of (Ti,Al,Si)N Deposited by HPPMS
|
Modulated Pulse Power Deposition of Optical Coatings
|
Arbitrary Voltage Pulse Shape Plasma Generator with RF Capabilities for Material Processing
|
An Investigation of Magnetron Magnetic Field Strength Requirements for HIPIMS
|
|||