ICMCTF2005 Monday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Monday, May 2, 2005 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | ||||||||
| A1-2 |
The Effect of Nitrogen on the Formation and Oxidation Behavior of Iron Aluminide Coatings Fabricated by Chemical Vapor Deposition
|
Aluminum Diffusion in Alumina Scales Grown on Fe-Cr-Al Alloys
|
Microstructure, Composition and Oxidation Resistance of Nanostructured Ni-Al-N Coatings Produced by Magnetron Sputtering
|
(Ti,Al)N Coatings for Aluminum Die Casting Dies: a Study of the Reactivity Between Ti1-xAlxN and Aluminum.
|
Coatings for Extreme Environments in the Bearing Contacts
|
Structure, Bonding, and Adhesion of MoSi2/Fe and SiO2/MoSi2 from First Principles
|
On the Strength of TiAlN Following to High Temperature Operations
|
A Multifunctional Boron Coating on Metal Substrate
|
Microstructural and Tribological Characteristics of DLC Coated Al2O3 at Elevated Temperatures
|
||
| B5 |
Remarkably Adherent, Thick and Tough Chromia (Cr2O3) Coatings on Steel Made by a New Process.
|
Characterization of Hybrid Plasmas Produced by Laser Ablation and Pulsed DC Magnetron Sputtering
|
Laser-Arc-Module System for Industrial Series Deposition of Super Hard Coatings
|
Pulsed Laser Deposition of Lanthanum Sulfide Thin Films
|
Reduction of Particulates and Stress in c-BN Films Prepared by Ion-Assisted Pulsed Laser Deposition
|
Industrially-Scaled Large-Area and High-Rate Tribological Coating by Pulsed Laser Deposition
|
Adhesion of Superhard Pulsed Laser Deposited ta-C films with Low Internal Stress on Silicon, WC-Hard Metal and Steel
|
Hard Zirconium Carbide Thin Films Grown by Pulsed Laser Deposition
|
|||
| B7-2 |
Designed Coatings: Correlation of Coating Properties to Application Results
|
Effect of Film Thickness and Ti Interlayer on the Structure and Properties of Nanocrystalline TiN Thin Film Deposited by Unbalanced Magnetron Sputtering
|
Residual Stress Development in UMS TiN Coatings
|
The Effect of Plasma Immersion Ion Implantation on the Hardness and Composition of Cathodic arc deposited Titanium Nitride Thin Films
|
Structural and Chemical Properties of Sputtering Deposited Ti-Ge-N Thin Films
|
Decomposition of Supersaturated Ti-Al-N
|
High Thickness Ti/TiN Multilayer Thin Coatings for Wear Resistant Applications
|
||||
| C4/F2 |
Interface Broadening due to Ion Mixing During Thin Film Growth in Plasma-Enhanced Chemical Vapor Deposition Environment
|
In-Situ Spectroscopic Ellipsometric Determination of Morphological and Electronic Properties of Plasma Deposited Ultra-Thin Metal Films
|
In-Situ Characterisation of Radiofrequency Magnetron Sputter Deposition of SiOx using Elastic Recoil Detection
|
Characterization of an Ar/O2 Magnetron Sputtering Plasma using a Langmuir Probe and an Energy Resolved Mass Spectrometer
|
In-Situ Ellipsometry Measurement of Palladium Caped Yttrium Thin Films during Hydrogenation and Dehydrogenation
|
||||||
| E5/G4 |
Uniform Coating of DLC Film by Means of PBIID Process using Superimposed RF and High-Voltage Pulses
|
A Crystal Chemical Approach to the Formulation of Self-Lubricating Nanocomposite Coatings
|
In-Situ Formation of Self-Lubricating Tribofilms for Dry Machinability
|
Dry Machining using Novel Chromium Based Coatings: Drawbacks and Opportunities
|
Dry-Drilling of Aluminum using Carbon-Based Tool Coatings
|
Smart Tools: Wear Resistant Coating System with Integrated Thin Film Sensors for flank wear measurement
|
Nearing No-wear Conditions of Surface Tooling in Dry Cutting by Applying External Magnetic Field
|
The Effect of Solid Lubricants on Tool Performance During Wet, Gas-Cooled and Dry Drilling
|
Tribological Adaptability of TiAlCrN PVD Coatings under High Performance Dry Machining Conditions
|
||
| F1/E3-2 |
Nanotribological Testing of Nickel and DLC Coated Nickel for Microdevice Applications
|
Phase Transformation and Hardness of the Ni-P-Al Ternary Coatings under Thermal Annealing
|
Ageing Under Mechanical Stress of a Silver Based Multilayered Mirror
|
Indenter Surface Area and Hardness Determination by Means of a FEM-Supported Simulation of Nanoindentation at Low Penetration Depths
|
The Effects of Pulse Frequency and Substrate Bias to the Mechanical Properties of CrN Coatings Deposited by Pulsed DC Magnetron Sputtering
|
Use of Certified Reference Materials in Instrumented Indentation: Improved Methods for Indirect Calibrations
|
Analysing Nanoindentation Unloading Curves using Pharr’s Concept of the Effective Indenter Shape
|
The Effect of Heat Treatment on the Mechanical Properties and Microstructure of CrN/AlN Multilayer Coatings
|
Mechanical Behaviour of Thin Films Deposited on Ductile Substrates: Cracking and Critical Parameters for Damage Evolution
|
Combination of Normal and Lateral Force-Displacement Measurements as a New Technique for the Mechanical Characterization of Surfaces and Coatings
|
|