ICMCTF2001 Wednesday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, May 2, 2001
1:30 PM 2:30 PM 3:30 PM 4:30 PM
A2-1
New PVD Coatings Applied to Dies for Extrusion of Aluminium
Influence of Deposition Temperature and Time During PVD Coating of CrN on Corrosive Wear in Liquid Aluminium
Development and Implementation of Plasma Sprayed Nanostructured Ceramic Coatings
New Coatings for Continuous Casting Rolls
Tribological Behaviour of Coatings for Continuous Casting of Steel
High-Rate Sputter Deposited Tantalum Coatings on Steel for Wear and Erosion
Laser Pulse Heating of Protective Coatings for Large Caliber Gun Bores
High Temperature Erosion Protective Coatings for Turbomachinery Use
Erosion Testing of Coatings for V-22 Aircraft Applications
B1-3
A Simple Cathodic Arc Macroparticle Filter
Laser-Arc - Laser-Induced, Pulsed Vacuum Arc Deposition: Process, Technology and Applications
Preparation of Ti Targets with Different Grain Size for the Arc Ion Plating Method
Calculation and Measurement of the Time Dependend Erosion Rate of Electromagnetically Steered Rectangular Arc Cathodes
Simulation of Vacuum Arc Deposition in Industrial Coaters
Properties of Super Hard Metal Nitride Coatings Deposited by Plasma Enhanced Arc-Cathode
Characterisation and Performance of Partially Filtered Arc TiAlN Coatings
Properties of Coatings Deposited Using a Filtered Vacuum Arc Carbon Plasma Source
Low Temperature Cathodic Arc Deposition
Deposition and Characterization of Sub-Stoichiometric Titanium Carbide Film by Filtered Cathodic Vacuum Arc Technique
C2-2
In-Situ Stress Measurements of Thin Films
Graded Cermet Selective Coatings Based on Aluminium Deposited by Magnetron Sputtering Technology
ZnS Sol-Gel Deposited Films: The Characteristics of the Sulphidation Process
Significant Structure and Property Variations on Si-C-N Films Via the Wet Etching Treatment of the Si Substrate
Optical , Electrical and Compositional Studies of Silicon Nitride Thin Films
Poster C Summary Session
D2-2
Morphology Variation of Diamond With Increasing Pressure Range up to 400 Torr During Deposition Using Hot Filament CVD
Thermal Plasma CVD of cBN and Diamond Films - Similarities and Differences
Diamond (Heteroepitaxial) Nucleation by Ion Beam Impact: A Reality
Synthesis of Diamond-Like Carbon Films by Plasma Electrolytic Deposition
Metal-Carbon Composite Coatings with Nanostructure: Creation and Properties
Comparison of the Structure and the Mechanical Behavior of Conventional and Ca-O-Modified Diamond-Like Carbon Coatings Synthesized by a Direct Current Discharge
Wear Resistant Carbon Coatings Deposited Without Substrate Bias Voltage
E1-2
The Influence of Temperature and Humidity on Wear of MoS2 and MoST Films
Microstructure, Chemistry and Tribology of MoSx/Au and MoSx/WSey Co-Sputtered Composites
Chemical Effects in the Tribology of Sputter-Deposited Metal/MoS2 Films
Elimination of Lubricants in Industries in Using Self-Lubricating Wear Resistant Coatings Based on MoS2
Role of Transfer Film on Wear Life of Ti-doped MoS2 Coatings in Moist Air
Fretting Wear Behavior of Moisture-Resistant MoSx Coatings
Preparation of Ni-P-MoS2 Solid lubricant Films by Using Different Surface Detergents
Mechanical Solicitations and Dissipated Energy Influence on a Copper/2D Woven Carbon-Carbon Composite Couple Crossed by an Electrical Current
Enhancement to the Tribological Properties of Titanium Using Plasma Electrolytic Oxidation and Plasma-Immersion Ion Assisted Deposition Techniques
F1/E4-2
High Cycle Fatigue of Thermal Spray Coatings and Substrates
Interfacial Adhesion to Study the Role of Residual Stresses Upon Adhesion of Thermal Sprayed Coatings
An Evaluation Software of the Impact Test Results to Quantify the Creep Behaviour of Monolayer Thick Plasma Sprayed Coatings
Interpretation of Coated Tools Performance in Milling and in Impact Testing Based on Thin Hard Coatings Stress-Strain Curves
Mar Resistance of Automotive Clearcoats
Surface Engineering With Graded Multilayer Coatings: A Numerical Study Based on the Boundary Element Method
A Study of Fatigue Behavior of DLC Films Using Acoustic Emission Monitoring
Evaluation of the Fracture Toughness of Silicon Carbide Thin Films through Two Different Indentation Techniques
Measurement of Mechanical Properties of Single and Multi-layered Nitride Thin Films by Depth Sensing Nanoindentation and SEM/AFM Techniques.
Properties of Al2O3 Films Deposited Using PVD Twin-Mag Sputtering.
On the Evaluation of the Absolute Hardness of TiNx and TiC Deposits
G1-1
Control of Ionization in Magnetron Sputtering:fromCathode Design to Film Properties
Ensuring Long Term Stability of Process and Film Parameters During Target Lifetime in Reactive Magnetron Sputtering
Automated Reactive Sputtering
Industrial Precision Deposition by Filtered High Current Arc
An Effective Way to Improve the Coated Tool Performance Through Annealing
Improvement of PVD Coated Inserts Cutting Performance, Through Appropriate Tool Pre- and Post-Treatments
Optimisation and Characterisation of a TCP Type RF Broad Beam Ion Source
Ion Density Studies in Vacuum Arc Plasmas Passing Through an Off-Plane Double Bend Magnetic Filter
Room Temperature Deposition of High-Purity Silicon Oxide Films by rf Plasma-Enhanced CVD
H1-2
New Concepts in Formulating Diffusion Barriers/Adhesion Promoters for the Interconnect Technology of Tomorrow
Integration Schemes of HDP-FSG for 0.18 µm Logic Process
Filtered Cathodic Vacuum Arc Deposition of Thin Film Copper
Integration of MOCVD Titanium Nitride with Collimated Titanium and Ion Metal Plasma Titanium for 0.18 µmm Logic Process
Interconnect Degredation
Thermomechanical Properteis of a-Si:H and a-Ge:H
Sessions | Time Periods | Topics | Schedule Overview