ICMCTF2001 Tuesday Morning

Failure Mechanisms and Models for TBCs

The Method of Nanoindentation for the Evaluation of Mechanical Properties of Electron Beam-Physical Vapor Deposition-Thermal Barrier Coatings (EB-PVD-TBCs)

Measurement and Prediction of Residual Stresses in NiCoCrAlY Bond Coatings on First Heating After Deposition

Influence of Thermal Cycling and Oxidation on the Microstructure, Properties and Residual Stresses in NiCoCrAlY Bond Coats

Microstructural Development and Failure Characteristics of EBPVD/MCrAlY/IN738 Thermal Barrier Coatings during Thermal Cyclic Oxidation at 1121°C

Numerical Analysis of the Influence of Coating Porosity and Gradient Profile on the Residual Stresses in High Temperature Graded Coatings

On Failure Mechanisms of TBCes with PtNiAl Diffusion Bond Coats

Stochastic Features of Microcracking Mechanism in Thermal Barrier During Thermal Cycling

Structure-Properties-Performance Relations in Nanocomposite Hard Coatings

Synthesis and Tribological Properties of TiN/SiN_x Superlattice Coatings with an Equiaxed Microstructure, Increased Hardness, and Reduced Internal Stress

CrN/NbN Superlattices Grown by Cathodic Reactive Arc Deposition

Study of Mechanical and Tribological Properties of Ti/TiC and Cr/TiC Multilayer Films Deposited by Magnetron Sputtering Assisted Pulsed Laser Deposition

Structure and Properties of Al-Ti-Si-N Coatings Prepared by the Cathodic Arc Ion Plating Method for High Speed Cutting Applications

Microstructure and Properties of Low Friction TiC-C Nanocomposite Coatings Deposited by Magnetron-Sputtering

Microstructure and Mechanical Properties of Hydrogenated WC-C Nanocomposite

Hardness, Toughness, and Wear Resistance of TiC-Cr and TiC-Ti Multilayer Films Developed to Simulate Nacreous Microstructures

Thermal Stability of Nanostructured Boride/Nitride Films

Achieving Narrow Bandpass Filters Which Meet the Performance Required for DWDM

Thermochromic VO₂ Deposited by Active Control of Direct Current Magnetron Sputtering

Tribological Properties of PECVD Optical Coatings

Front Surface Filters for Thermo-Photovoltaic Cells

Deposition of Fluoride Coatings Using Pulsed Ion Assisted Processes

New Techniques for Monitoring and Control of Optical Thin Film Deposition by In Situ Spectroscopic Ellipsometry

Measurement of Very Thin Films Using Spectroscopic Ellipsometry

Synthesis and TEM Analysis of Boron Nitride Nanotubes and Nanocones

In-Situ Characterization of BN Film Growth

Parameter Spaces for the Nucleation and the Subsequent Growth of Cubic Boron Nitride Films

Synthesis and Characterization of Hexagonal/Cubic Boron Nitride Multilayer Films

Dependence of the Stress of c-BN Films on the Major Deposition Parameters: Theoretical and Experimental Studies

Active Cubic Boron Nitride Nucleation Sites at Different Stress Levels

Aluminium-Doped c-BN Films by Magnetron Sputtering

Thick Ultra-hard Coatings Based on Cubic Boron Nitride

Deposition and Tribological Properties of Thick c-BN Films

Development and Tribological Applications of Carbon Based Coatings

Nano-Wear-Resistance of Amorphous Carbon Nitride Thin Films Prepared by Shielded Arc Ion Plating

Influence of Different Plasma Confinement Conditions on Mechanical and Tribological Properties for Deposition of Me-DLC Coatings

Tribological Characterisation of Diamond-Like Carbon Coatings on Co-Cr-Mo Alloy for Orthopaedic Applications

Role of Third Bodies in Friction and Failure of Diamond-Like Nanocomposite Coatings Studied by In Situ Raman Tribometry

Deposition, Structure, Mechanical Properties and Tribological Behavior of Polycrystalline to Smooth Fine-Grained Diamond Coatings

A Study of Diamond-Like Carbon Films Deposition on a High Nitrogen Stainless Steel

Influence of Atomic Hydrogen Bombardment on the Diamond/DLC Couple Tribological Behaviour

Thickness Uniformity of Free-Standing Diamond Synthesized by "Trumpet Bell" Flame Method

Profile Reconstruction in Sputter Depth Profiling

Silicon Diffusion on LiF Films Deposited on Si(100) Induced by Electron Beam

Study the Resivity of TaxNy Films by Implementing OES in the Magnetron DC Sputtering System

Influence of Environmental Factors on the Chemical Integrity of Protective Coatings

Measuring and Correlating Variations of Hardness, Composition and Microstructure on the Nanometer-Scale

Analysis of Amorphous Boron Carbide Thin Films for Potential Applications as Hard Coatings

Junction Properties of Nickel Phthalocyanine Thin Film Devices Utilizing Gold and Indium Electrodes

Phase Changes of CrN Films at High Temperature Under Controlled Atmosphere

Scratch and Mar Resistance of Paint Coatings and Polymer Films Using the Nanoscratch Technique: Viscoelastic Behavior and Relaxation Effects

Effect of Laser Irradiation on I-V Characteristics of Pulse-Electrodeposited Ag/Hg:1212/CdSe Hetero-Nanostructures

Modern CVD Equipment - Fit for a New Generation of Coatings

Industrial Trends and Aspects in Arc Coating Technology and Arc Equipment

INO - An Internet Information System for Innovative Coatings and Thin Films

Developments in Coatings, Equipment and Applications for Flexible Coating

Materials-Based Design for Real-World Applications

Producing Graphit-iC^TM Coatings in Large Scale Production Systems Using The UDP 850/6 Unbalanced Magnetron Sputtering System

Growth Effects in Carbon Coatings Deposited by Magnetron Sputtering

New Source with High Quality Flow for Thin Film Technologies

Amorphous Diamond Mems*

Mechanical and Tribological Properties of Ultrananocrystalline Diamond (UNCD) Thin Films for Multifunctional Devices

Amorphous Hydrocarbon Based Thin Films for High-Aspect-Ratio MEMS Applications

Patterning of Diamond and Amorphous Carbon Films Using Focused Ion Beam

Three-Dimensional Structures Assembled from Polysilicon Surface Micromachined Continuous Hinges and Microrivets