ICMCTF1999 Thursday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Thursday, April 15, 1999 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | |||||||||
| B1 |
Carbon Thin Films with Enhanced Properties from Cathodic Arc Plasmas
|
Vacuum Arc Deposition of TiN, NbN and TiN/NbN Multi-Layer Coatings
|
Linear Magnetron Arc Cathode and Macroparticle Filter
|
Influence of an Electrical Field on the Macroparticle Size Distribution in a Vacuum Arc
|
A Comparison of DC and AC Arc Thin Film Deposition Techniques
|
Effect of Nitrogen Pressure and Bias Voltage on the Structure and Properties of arc PVD Molybdenum Nitride Coatings.
|
The Investigation of Composition and Oxidation Effects on TiAlN Coating By Magnetic Filter Cathodic Arc Deposition
|
|||||
| D3/G8 |
Electrical and Optical Properties of Diamond-like Carbon
|
Large Area Deposition of Field Emission Cathodes for Flat Panel Displays
|
Improvement of the Wear and the Corrosion Resistance of C/Al-Composites by Diamond-like Carbon Coatings
|
Electron Field Emission from Amorphous Carbon Nitride by ECR-CVD Synthesis
|
Field Emission Display Development at Motorola
|
Electron Field Emission and Secondary Electron Emission Characteristics From Cesiated Amorphous Carbon Films
|
Field Emission Properties of Nanostrucured Carbon Films
|
|||||
| E2-2 |
Study of the Wear and Friction Behaviour of Hard Sputtered Carbon Coatings
|
Tribological Evaluation of CNx Thin Films for Space Applications
|
Influence of Soft Coatings on Chip Formation and Cutting Performance
|
Enhanced Mechanical Seal Performance Through CVD Diamond Films
|
Pitting Failure Mode in Thin Film Coated Surfaces
|
Induction Surface Hardening of Hard Coated Steels
|
Enhanced Tribological Properties of TiN/CNx Multilayer Coatings with an Equiaxed Microstructure
|
A Simulation Test for the Selection of Coatings and Surface Treatments for Plastics Injection Moulding Machines
|
Development of TiC-Coated M62 Balls for Hybrid Bearings with Reduced Sphericity Distortion
|
Relative Significance of Elastic and Thermal Property Mismatches for Wear Protection with Hard Coats in Tribological Systems
|
Wear and Friction Behaviour of Duplex Treated AISI 4140 Steel
|
|
| F1/E4-2 |
Stress and Oxidation in CuNi Thin Films
|
Internal Stresses, Young's Modulus and Practical Adhesion of Organic Coatings Applied onto 5754 Aluminum Alloy
|
Splitting Hard Films off the Substrate
|
Evolution of the Microstructure and Mechanical Properties of TiNx Thin Films Through the Thickness
|
Substrate Straining Tests of TiN Coatings on Tool Steel Substrates
|
Critical Loads and Frictional Force Measurements in the Industrial Scratch Testing of TiN on M2 tool Steel.
|
Comparison of the Failure Mechanisms During Scratch Testing of Chromium Nitride and Titanium Nitride Coatings Deposited by Cathodic Arc Evaporation
|
3D Boundary Element Modelling of Elastic Ball on Flat Contact on Bi-Layer Composites With Very Thin Coatings : Influence of Internal Stress
|
The Concept of an Advanced Impact Tester Supported by Evaluation Software in Characterization of Hard Layered Media
|
Characterisation of Surface Coatings Using the Nanoscratch Technique; Appraisal and Examples
|
The Effects of the Various Intermittent Annealing Temperatures on the Mechanical Properties of the 45 Degree Rolled Rhenium Samples.
|
|
| G9-2 |
Determining Substrate Temperature During Cathodic Arc Deposition
|
The SLC-technology for Chromelike Surface - A New Process Combining Powder Painting With Physical Vapor Deposition
|
Process and System Design for Chromium Coating of Deeply Recessed Parts Using Cathodic Arc or Sputtering
|
Performance of Hard Coatings, Made by Balanced and Unbalanced Magnetron Sputtering, for Decorative Applications
|
Corrosion Characterization of Decorative Coatings Deposited by Cathodic Arc Evaporation
|
|||||||