ICMCTF1998 Tuesday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Tuesday, April 28, 1998 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:30 PM | 2:30 PM | 3:30 PM | 4:30 PM | |||||||||
| A3-2 |
Mechanical Properties of Zirconia Thermal Barrier Coatings Measured using Instrumented Indentation
|
Strain Gradients in Plasma Sprayed Zirconia TBCs
|
Mechanical and Thermophysical Properties of Thick PYSZ Thermal Barrier Coatings - Correlation with Microstructure and Spraying Parameters
|
Microstructure Formation in Plasma Sprayed Functionally Graded NiCoCrAlY/Yttria Stabilized Zirconia Coatings
|
Break
|
Phase Stability in Scandia, Yttria-stabilized Zirconia TBCs
|
Sintering and Creep Behavior of Plasma-Sprayed Zirconia and Hafnia Based Thermal Barrier Coatings
|
|||||
| B6 |
Review of Ion-Assisted Pulsed Laser Deposition of Cubic-BN and Other Hard Materials
|
PLD Growth of Boron Nitride Using an Inductively Coupled RF Nitrogen Plasma Source
|
Enhancement of the Properties of Pulsed Laser Deposited Carbon Nitride by the Synchronization of Laser and N2 Gas Jet Pulses.
|
Pulsed Laser Deposition Plume Species Effects Due to Double Excimer Laser Pulses
|
Fluorine-doping of ZnO Films in Reactive Dual-laser Ablation
|
High-rate Laser Deposition of Ceramic Coatings
|
Investigation Into 3-Dimensional Laser Processing Of Tribological Coatings
|
High Wear Resistant Surface Coatings on Ti-Alloys Prepared by Combination of Laser-assisted Gas-alloying and Arc Deposition
|
Low Temperature Pulsed Laser Deposition of Titanium Carbide Thin Films on Bearing Steels
|
The Effects of Substrate Properties on Metal Deposition from Liquid Media by Laser Chemical Vapor Deposition (LCVD)
|
||
| C3 |
Optical Properties of Chiral and Porous Thin Films
|
Correlation of Predicted and Observed Optical Properties of Multilayer Thermal Control Coatings
|
Processing Directed Chemical State Alteration in Doped ZnO Films
|
Dependence of the Sheet Resistance of Indium-Tin-Oxide Thin Films on Grain Size and Grain Orientation Determined from X-ray Diffraction Techniques.
|
In-situ and Ex-situ Ellipsometric Characterization of the Interface Between Plasma Deposited Si-Compound Films and Polymer Substrates.
|
Fabrication of Durable Protected and/or Enhanced Gold Reflectors
|
Optical Properties of Sputtered Oxide Materials
|
Investigation of Light-emitting DLC Coatings by Time Resolved Photoluminescence
|
||||
| D2-2 |
Deposition Rate Effects on the Properties of Highly Tetrahedral Amorphous Carbon (ta-C).
|
Development of Adherent Diamond Coatings on Titanium Alloy
|
Fracture Strength in High Temperature of Free Standing CVD Diamond Films
|
The Investigation of Thermal Effect on the Properties of Pulsed Laser Deposited Diamond-like Carbon Films
|
Thermal Diffusion in MD Simulations of Thin Film Diamond Deposition
|
On the Hardness of a-C:H Films Prepared by the Methane Plasma Decomposition
|
Structural Investigations of Silicon Carbide Films Formed by Fullerene Carbonization of Different Substrates
|
|||||
| E2-2 |
Fracture Toughness Testing and Toughening Mechanisims of Some Commercial Cobalt-free Hardfacing Alloys
|
Wear-Resistant Monolithic and Multi-layered Cr/Cr2N/CrN Based Films for Temperature Sensitive Substrates
|
Fabrication, Characterization, and Testing of Hybrid Bearings Containing TiC-coated Balls
|
Microstructural Changes in DLC Films Due to Tribological Contact
|
Characterization of Multilayered Ti/TiB2 Coatings on Cemented Carbides
|
Some Effects of Ion Beam Treatments on Titanium Nitride Coatings of Commercial Quality
|
Wear Behavior of High Energy Plasma Sprayed Nanoscale WC-Co Coatings
|
A Comparative Study of the Influence of Triode Plasma Treatments, PVD TiN, CrN and Duplex Coatings and Ion Implantation on the Impact and Abrasive Wear resistance of Ti-6Al-4V
|
||||
| F1/E4-2 |
Tribo-Contacts On Compliant Substrates: Hard Coat Design Incorporating Frictional Dissipation
|
Comparison of Mechanical Properties of TiN Thin Films Using Nanoindentation and Bulge Test
|
The Mechanical Properties of Polycrystalline Silicon Carbide Films using Bulk-Micromachined Diaphragms
|
Mechanism for Stress Relaxation in Si-rich Silicon Nitride Thin Films
|
Mechanical Behaviour of Submicron Multilayers Submitted to Microtensile Experiments
|
The Effects of Particle Pollution on the Mechanical Behaviour of Multilayered Systems
|
Mesomechanical Studies of Coated Materials
|
Substrate Preparation and Stud Pull Adhesion of Metal Films on Graphite-Epoxy Composites
|
Influence of Nitriding on the Microstructure, Toughness, and Thermal Stability of Modern and Conventional Hot Forging Die Steels
|
Examination of General Mechanical Properties and Failure Mechanisms of W, Hard W(C) and W/W(C) Bilayer Coatings
|
||
| G3 |
The Design of Gas Distribution Systems for Large Area Plasma Deposition and Treatment Equipment.
|
The Hollow Cathode - a High Performance Tool for Plasma Activated Deposition
|
Hollow Cathode-Assisted Arc Plasma Processing
|
RF Hollow Cathode Arrays for Low Temperature Plasma Procesing
|
Effect of Magnetic Field Configuration on the Performance of the Hollow Cathode Linear Arc Discharge (LAD) Source.
|
Experiments and Modelling of Combined PVD- and CVD-Processes Using a Hollow Cathode Arc Discharge Plasma
|
Surface Functionilization of Polymer Films and Webs using Atmospheric and Subatmospheric Plasmas
|
Optimisation of Reactive Deposition in a Hollow Cathode Arc Equipment
|
Double Layer Coating by Hollow Cathode Discharge Ion Plating
|
|||
| H5 |
Advanced Contact Metallization for Logic and Memory Applications
|
Synchrotron X-ray Diffraction Studies of Interfacial Reaction Paths and Kinetics in Al/TiN Bilayer Structures
|
Contact resistance in Copper Metallization
|
Characterization of Multilayered Ti/TiN Films Grown by Chemical Vapor Deposition
|
Low Parasitic Resistance Contacts for Scaled ULSI Devices
|
Materials Science Issues of Ultra-Shallow Junction
|
||||||