AVS 72 Session NS-ThP: Nanoscale Science and Technology Poster Session

Thursday, November 12, 2026 4:30 PM in Ballroom A
Thursday Evening

Session Abstract Book
(499 KB, Nov 5, 2026)
Time Period ThP Sessions | Topic NS Sessions | Time Periods | Topics | AVS 72 Schedule

NS-ThP-2 Single-Molecule Spectro-Microscopic Visualization of Surface-Supported Configurational Flexibility and Intramolecular Transformations
Soumyajit Rajak, Nan Jiang (University of Illinois, Chicago)
Understanding physicochemical transformations at surfaces with molecular-scale precision is essential for advancing nanoscale materials characterization and the rational design of functional interfaces for catalysis, molecular electronics, and optoelectronic devices. A major challenge in surface characterization is the direct identification of intermediates, adsorption geometries, and reaction products with simultaneous chemical specificity and sub-molecular spatial resolution, capabilities that are difficult to achieve with conventional ensemble-averaged techniques. Although scanning tunneling microscopy (STM) provides atomic-scale structural information, it often lacks definitive chemical sensitivity, particularly for nonplanar and conformationally flexible molecular systems. A single-molecule tip-enhanced Raman spectroscopy (TERS) methodology integrated with ultra-high vacuum (UHV) STM has been utilized to achieve correlative nanoscale structural and chemical characterization of thermally induced surface transformations and surface-dependent molecular arrangements. Coupling light with an atomically sharp plasmonic probe creates highly localized surface plasmons (LSPs), which allow the overcoming of the diffraction limit and confined enhancement of the Raman signals. As a model metal-organic interface, we investigate tetraphenyl tetrabenzoporphyrin adsorbed on Cu(100) and Cu(111), representative systems relevant to heterogeneous catalysis and organic electronic materials. Porphyrin derivatives are especially attractive for nanoscale studies because of their tunable electronic structure, metal-coordination functionality, and conformational flexibility arising from σ-bonded meso-substituents.Our measurements demonstrate that TERS provides chemically specific vibrational fingerprints of individual adsorbed molecules while simultaneously resolving symmetry variations and local conformational changes induced by molecule–substrate interactions at the sub-nanometer scale. Spatially resolved vibrational mapping enables discrimination between coexisting adsorption geometries and thermochemically transformed species that exhibit distinct chemical identities. The results further reveal how substrate interactions stabilize nonplanar conformations and alter molecular symmetry, establishing direct structure-property relationships at the single-molecule level.
NS-ThP-3 Intrinsic Stability of Rhodium Nanoclusters on HOPG: An Atomic-Scale Investigation of Heat Treatment and CO Adsorption
Charbel Tawny, Maxwell Gillum, Gallage KPA Ariyaratne, Mausumi Mahapatra (Loyola University Chicago)

Understanding structure-reactivity relationships in heterogeneous catalysis requires well-defined model systems that enable atomic-scale characterization. In this work, Rhodium (Rh) nanoclusters were deposited on Highly Oriented Pyrolytic Graphite (HOPG), an inert support, to investigate their nucleation, growth and changes in morphology under ultra-high vacuum (UHV) conditions. By systematically varying Rh coverage (0.09 ML to 0.6 ML), Scanning Tunneling Microscopy (STM) was used to resolve cluster size, morphology, and spatial distribution. Our experiments reveal the formation of highly dispersed Rh nanoclusters with a notably narrow size distribution; for instance, a 0.09 ML deposition produced particles with an average width of 1.74 ± 0.5 nm and height of 0.85 ± 0.1 nm. Crucially, these nanostructures exhibit exceptional thermal stability, maintaining their size and distribution even after annealing to elevated temperatures up to 850 K. Subsequent CO exposure at both 300 K and 500 K allowed for the visualization of surface interactions. While CO induced streaking was observed in STM images due to adsorbate mobility, the Rh clusters remained structurally stable without significant redispersion or morphological changes. This study establishes the robustness of Rh nanoclusters in response to various stimuli that would be present in an industrial reaction, such as high temperatures and gas exposure, further deepening our knowledge of surface catalysis.

NS-ThP-4 Characterization and Analysis of Rhodium Oxide Nanoparticles on HOPG Surface
Gallage KPA Ariyaratne, Maxwell Gillum, Charbel Tawny, Mausumi Mahapatra (Loyola University Chicago)

This study investigates the characterization and analysis of rhodium oxide (RhOₓ) nanoparticles formed on highly oriented pyrolytic graphite (HOPG), with the aim of understanding how oxygen influences nanoparticle stabilization and behavior on a weakly interacting support. HOPG serves as an ideal model surface for probing intrinsic nanoparticle properties in the absence of strong substrate interactions. Rh nanoparticles are vapor-deposited onto freshly cleaved HOPG under ultra-high vacuum conditions and subsequently oxidized at controlled temperatures (300–850 K) to generate RhOₓ nanostructures. Scanning Tunneling Microscopy (STM) is employed to examine nanoparticle morphology, size distribution, and structural evolution as a function of temperature and Rh coverage. Oxidation at room temperature results in the formation of RhOₓ nanoparticles with an apparent reduction in particle density and surface coverage relative to metallic Rh. At elevated temperatures, larger RhOₓ nanoparticles are observed, with average widths of 9.14 nm. High temperatures like 850 K, result in the formation of triangular channels on HOPG surface, originating from step edges. These features are not due to direct structural failure of HOPG but rather arise from oxygen mediated anisotropic etching of the graphite surface. Oxygen can dissociate on RhOx which then migrate onto the HOPG surface where the atomic oxygen react with uncoordinated carbon atoms at defect sites and step edges which lead to the removal of carbon atoms as CO/CO2 and leads to anisotropic etching on surface. Post oxidation exposure to carbon monoxide (CO) is performed to evaluate redox reversibility and stability under reducing conditions, with the evolution of gaseous species such as CO₂, O₂, and CO observed, while the crack and particle size remains unchanged. In parallel, Density Functional Theory (DFT) calculations using (PBE-GGA) model RhOₓ adsorption on graphite, identifying favorable configurations, and electronic properties with nanoparticle stability, reactivity, and catalytic performance on carbon supports.

NS-ThP-6 Ce-Doped TiO₂ Nanoparticles from Commercial P25 and Flame Spray Pyrolysis Synthesis Routes for Enhanced Visible-Light Photocatalysis
Selda Topcu Sendogdular (Stony Brook University); Ilker Keseroglu, Pelagia-Iren Gouma (The Ohio State University)

Ce-doped TiO₂ nanoparticles were synthesized by modifying commercial Degussa P25 and flame-made TiO₂ produced by flame spray pyrolysis (FSP), followed by thermal treatment at 500 °C. The effects of Ce doping on the structural, morphological, optical, and photocatalytic properties of TiO₂ were investigated for undoped and Ce-doped samples containing 5 and 40 wt% Ce.

X-ray diffraction (XRD) analysis showed that both P25 and FSP TiO₂ consisted primarily of anatase and rutile phases, while Ce doping suppressed the anatase-to-rutile transformation and promoted CeO₂ phase formation at higher Ce loading. Ce doping reduced the anatase crystallite size and altered the phase composition, with brookite contributions observed in CE5-P25 and CE5-TiO₂ samples. SEM and TEM analyses revealed morphological differences between P25 and FSP TiO₂ particles, where P25 exhibited irregular elongated and polygonal particles, while FSP-derived TiO₂ showed predominantly spherical particles. Ce doping decreased particle size to approximately 14–34 nm, whereas high Ce loading (40 wt%) resulted in particle agglomeration and cube-like Ce-rich structures. SAED and HRTEM analyses confirmed the coexistence of anatase and rutile phases and verified lattice fringes corresponding to anatase (101) and rutile (110) planes.

UV–Vis spectroscopy demonstrated enhanced visible-light absorption and a red shift in the absorption edge with increasing Ce content. The bandgap decreased from approximately 3.06 eV for pure TiO₂ to 2.48 eV for Ce-doped samples, indicating improved visible-light response. Photocatalytic performance was evaluated through methylene blue degradation under visible-light irradiation using a Xe lamp with AM 1.5G and a 400 nm cut-on filter. Among all samples, CE5-TiO₂ exhibited the highest photocatalytic activity, achieving approximately 90% methylene blue degradation under visible light.

The enhanced photocatalytic performance is attributed to reduced crystallite size, suppression of rutile phase growth, modified phase composition, and improved visible-light absorption induced by Ce doping. These results demonstrate that Ce modification effectively enhances the photocatalytic activity of both commercial P25 and flame-made TiO₂ for environmental remediation applications.

NS-ThP-7 Roll-to-Plate Nanoimprint Lithography for Fabrication of Biomimetic Structures
Daniela Topasna, Juan Gonzalez, Sebastian Ziegler (Virginia Military Institute)


Nanoimprint Lithography (NIL) fabrication technique consists of transferring a pattern from a template by pressing it onto a resin coated substrate, yielding structures with nanometer resolution. The resin can be cured thermally or by exposure to UV radiation. This is a simple, low-cost and high-throughput technique, which has been used as an alternative to photolithography in semiconductor industry, optics and photonics, and biomedical field. NIL roll-to-plate method was used in this project to replicate microstructures of Cicada wings which are of interest due to their antibacterial properties. We report the results on the fabrication of these biomimetic structures and on their characterization by scanning electron microscopy.

NS-ThP-8 Nanoscale Surface and Interface Engineering of Asymmetric Electrode Screen Length for Advanced Nanoscale Ferroelectric Devices
Philip (Sanghyun) Lee (University of Kentucky); Kent Price (Morehead State University); M. David Henry (Sandia National Laboratories, USA)

The continued scaling of ferroelectric tunnel junctions (FTJs) has placed unprecedented importance on understanding and controlling nanoscale surface and interface interactions within ultrathin HfO₂–based ferroelectrics. At thicknesses below 6 nm, the electronic structure, bonding environment, and screening behavior at metal/ferroelectric interfaces dominate the tunneling landscape, often more strongly than the bulk ferroelectric properties themselves. Conventional symmetric Metal-Hf0.5Zr0.5O2-Metal (MFM) stacks such as TiN/HZO/TiN exhibit negligible tunneling electroresistance (TER) because their interfaces screen polarization charges in an identical manner, suppressing any barrier asymmetry. While inserting dielectric interlayers can restore asymmetry, these additional interfaces introduce variability, trap formation, and integration challenges.

This contribution presents a materials–driven strategy that leverages intrinsic nanoscale surface and interface asymmetry between dissimilar metal electrodes to enhance FTJ performance without modifying the ferroelectric layer. We focus on five CMOS compatible metals such as TiN, W, Ru, TaN, and Mo about possessing distinct electronic screening behavior, interfacial bonding characteristics, and surface chemistries with HZO. These differences affect how polarization-bound charges are compensated at the interface, reshaping the tunneling barrier.

To assess these nanoscale interfacial effects, multiple devices including Ta/HZO/TaN were developed and their nanoscale interfacial structures and chemistry were compared in agreement with theoretical research for MFM devices. This study incorporates realistic ferroelectric switching, nonlocal tunneling transport, and metal–specific screening behavior, enabling direct correlation between nanoscale interface physics and device–level performance. Surface and interface characteristics with multiple HZO thicknesses were quantified to confirm how interfacial screening, depolarization stability, and surface-induced barrier shaping collectively determine TER, read current, and write voltage.

Our results show that electrode pairs with different interfacial screening length create strong asymmetry in the tunneling barrier, enabling enhanced TER without the need for additional interlayers. Energy band analysis reveals how nanoscale surface interactions such as metal-oxygen bonding, interfacial dipole formation, and screening charge distribution directly affect the tunneling mechanism in opposite polarization states. Finally, we mapped optimal metal combinations that support low–voltage switching and stable ferroelectric behavior <6nm HZO for interface–engineered MFM devices.

NS-ThP-9 Time-Delayed Measurements of Heterogeneous Dynamic Data
Petro Maksymovych (Clemson University); Sabine Neumayer (Oak Ridge National Laboratory, USA)

In neuromorphic and memory devices, accessible multistability is enabled by the dynamics of the constitutive materials rather than by their equilibrium structures alone. Hysteresis loops, oscillatory responses, and other time-dependent signatures reflect the multiplicity of accessible material states. Yet deciphering the underlying dynamics remains persistently elusive — in no small part because the dynamic information itself is treated qualitatively rather than as a quantitative observable.

I will present a systematic approach based on time-delayed embedding and dynamic mode decomposition that treats dynamic data as a structured object, extracting its nonlinearity, topology, and a predictive numerical model of the underlying process. Applied to resistive switching in memory oxide materials [1,2], nonlinearity alone can discriminate between specific microscopic mechanisms. In ferroelectrics, the same framework separates genuine switching from spurious hysteresis and detects the signatures of a multiwell potential [3,4]. Effective denoising strategies extend the approach to noisy nanoscale and device measurements without loss of physical interpretability.

Time-delayed methodologies provide a transparent and interpretable connection between hysteresis loops and physical mechanisms, complementing machine learning methods and enabling parameter-free comparison between modeling and experiments of driven dynamics. R

esearch sponsored in part by Division of Materials Science and Engineering, Basic Energy Sciences, Office of Science, US DOE at the Oak Ridge National Laboratory, and, at Clemson University by the State of South Carolina through funding for the Battelle Savannah River Alliance Workforce Development Program.

1. O. Popova, et al., “Nanoscale imaging of He-ion irradiation effects on amorphous tantalum oxide toward electroforming-free neuromorphic functions“,Appl. Phys. Lett. 123, 153503 (2023)

2. S. M. Neumayer et al., “Nanoscale Probing of Electrical Memory Effects in van der Waals Layered PdSe, ACS Applied Materials & Interfaces. 16 (2024) 3665-3673.

3. S. M. Neumayer, et al., "Dynamic Stabilization of Metastable States in Triple-Well Ferroelectric Sn2P2S6", Advanced Materials 20 (2023) 2211194.

4. S. M. Neumayer, et al, “Polarization-controlled volatile ferroelectric and capacitive switching in Sn2P2S6”, Neuromorph. Comput. Eng.3 (2023) 014005.

NS-ThP-12 Nano-Projectile SIMS: Guiding EUV Resists Fabrication Process with Nanoscale Compositional Insights
Christelle Guillermier (Biennetechnology); Michael J Eller (University of Mississippi); Stanislav V Verkhoturov, Richard Rickman (Biennetechnology); Serge Della Negra (Universite Paris Saclay); Emile A Schweikert (Texas A&M and Biennetechnology)
The semiconductor industry is rapidly adopting extreme ultraviolet (EUV) lithography to pattern features below 10 nm. However, there remains a critical need for methods capable of probing nanoscale compositional uniformity throughout the multi-step fabrication process. Secondary Ion Mass Spectrometry (SIMS) has long been a key analytical technique in semiconductor process control due to its high sensitivity and high-resolution depth profiling capabilities, but its lateral resolution is limited to ~50 nm, restricting its application to critical dimension analysis. In this work, we present results from the newly commercialized Nano projectile Secondary Ion Mass Spectrometry (NP-SIMS) instrument, the Orion MkII, which overcomes this limitation by examining surfaces with individual nano-projectiles. Each projectile samples an area of ~10–15 nm in diameter and ~10 nm in depth, enabling nanoscale inspection with lateral resolution that matches the requirements of advanced EUV photoresist characterization. We demonstrate the capabilities of NP SIMS for identifying material inhomogeneities that can lead to defects during resist fabrication and compromise pattern quality. More specifically, NP-SIMS enables examination of characteristic molecular species for homogeneity and co-localization with other resist components. The integration of a multi-anode detector further allows identification and characterization of sites containing multiple instances of the same analyte. Finally, NP-SIMS provides detailed chemical analysis of defect sites, which can significantly affect the resist performance. Altogether, NP-SIMS delivers essential insights to guide the optimization of EUV resist chemistry and processing conditions.
NS-ThP-14 Local Electronic and Transport Properties of Epitaxial Graphene on Sic(0001) Studied by Scanning Tunneling Microscopy and Spectroscopy
Marek Kolmer, Umamahesh Thupakula, Shen Chen, Yong Han (Ames National Laboratory); Michael C. Tringides (Iowa State University)

Despite long-standing efforts to understand the interface between epitaxial graphene and the Si-terminated silicon carbide (0001) substrate, the exact atomic-scale structure, its complex bonding configurations, and the resulting electronic properties of the first epitaxial graphene carbon layer (Cbuffer) remain open problems. We will present how to control the local structure of the epitaxial graphene-SiC interface with a low-temperature scanning tunneling microscope (STM) [1]. We will show that the covalent bonds between Cbuffer and the SiC substrate may be reversibly broken and restored using the polarity of the electric field from the STM tip, generating protrusions at the interface of slightly higher amplitude. This buried interface manipulation enabled us to pattern epitaxial graphene with lateral precision, reaching the scale of a single 1.8 nm unit cell of the graphene-SiC interface (6×6)SiC moiré lattice. However, the STM manipulation experiments also provide direct evidence of silicon vacancies at the topmost reconstructed SiC(0001) layers [2]. Bias-voltage- and epitaxial graphene thickness-dependent characterization of the collective Cbuffer-SiC interface showed that 'Si' vacancy sites exhibit stable, non-switching behavior under STM electric fields. Moreover, vacancies introduce localized electronic states below the Fermi level. Our experimental results directly elucidate the atomic-scale interface and the influence of atomic and bonding configurations on the local density of states for graphene of different thicknesses on SiC(0001). Finally, we will present the consequences of the local epitaxial graphene structure on electronic transport properties.

Acknowledgements: This work was supported by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences, Materials Science and Engineering Division at the Ames National Laboratory, which is operated for the U.S. DOE by Iowa State University under contract # DE-AC02-07CH11358. M.K. and U.T. acknowledge support through a DOE Early Career Project.

References:

[1]M. Kolmer, J. Hall, S. Chen, S. Roberts, Z. Fei, Y. Han, and M. C. Tringides, Atomic-scale manipulation of buried graphene–silicon carbide interface by local electric field, Communications Physics, 7, 16 (2024).

[2]U. Thupakula, S. Chen, Y. Han, M. C. Tringides, and M. Kolmer, Subsurface Interface Structure Controlling Local Electronic Properties of Epitaxial Graphene on SiC(0001), The Journal of Physical Chemistry Letters, 16, 10487−10498 (2025).

NS-ThP-16 Ternary Gold Nanoparticle-Corona-Neurotransmitter Plasmonic Complexes for Probing Resonant Electronic Coupling
Tefera Entele Tesema, Kahmeria Smith (Prairie View A&M University)
Plasmonic gold nanoparticles generate localized electromagnetic fields under resonant excitation, making them powerful platforms for probing nanoscale metal–molecule interactions. Although the molecular corona is often treated as a passive stabilizing layer, its composition can regulate interfacial charge distribution, optical damping, adsorption geometry, and plasmon-mediated coupling. Here, we develop a ternary plasmonic complex consisting of a gold nanoparticle core, a plant-derived molecular corona, and neurotransmitter molecules as a model system for resonant electronic coupling at bioactive noble-metal interfaces, using surface-enhanced Raman scattering (SERS) as the primary readout.Purple sweet potato (Ipomoea batatas, PSP)-derived extract functions as a reducing/stabilizing medium and forms a molecular corona containing anthocyanins, phenolic acids, and related polyphenols. This corona is treated as an electronically active, chromophoric interface whose absorption can influence resonance conditions. Dopamine is used as an initial catecholamine model to probe how bioactive adsorbates perturb the corona-mediated optical and vibrational response.Preliminary UV–visible spectroscopy shows that extraction protocol, pH, and solvent environment influence the optical identity of the PSP extract and nanoparticle formation. Unpeeled PSP extracted in 0.05 M acetate buffer at pH 4.75 produces a wine-colored, colloidally stable AuNP suspension that remains visually stable for five days. In contrast, TFA extraction at pH ~3 preserves anthocyanin absorption near 522 nm but is associated with black precipitate during AuNP formation, consistent with uncontrolled nucleation or aggregation. These observations indicate that mildly acidic acetate conditions provide a more suitable window for controlled AuNP–corona assembly. Anthocyanin interconversion among flavylium, hemiketal, quinonoidal, and related forms provides a handle for tuning corona absorption relative to the AuNP plasmon and SERS excitation.The phenolic and catechol-like functionalities in the PSP corona overlap chemically with catecholamine neurotransmitters and may compete for or reorganize interfacial binding sites on gold. SERS will monitor these interactions through vibrational fingerprints that report adsorption geometry, orientation, and binding competition. Coupling corona electronic transitions, nanoparticle plasmon resonance, and laser excitation is expected to amplify neurotransmitter-sensitive interfacial signatures. This work provides a tractable model for signal transduction at biotic–abiotic interfaces and may inform plasmonic chemical sensing and bioactive nanoparticle design.
Session Abstract Book
(499 KB, Nov 5, 2026)
Time Period ThP Sessions | Topic NS Sessions | Time Periods | Topics | AVS 72 Schedule