AVS2014 Tuesday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
Session | Tuesday, November 11, 2014 | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | 12:00 PM | ||||||||||
2D+ |
Phase Engineering in 2D Transition Metal Dichalcogenides
|
Transition Metal Nanoparticles on Single-Layer MoS2: Structural, Electronic and Catalytic Properties
|
How Fluorination Enhances Friction Forces for Graphene
|
Chemical, Structural and Electrical Modification of Graphene
|
The Mechanochemistry of Chemically Modified Graphene
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Fe-catalyzed Etching of Graphene, Few-Layer Graphene, and Graphite
|
Tunable Graphene/Si Schottky Diode Sensor: Before and After Functionalization for Wide Range of Molecular Sensing
|
Dielectrics Layer Deposition on Graphene Surface by Functionalization with Polar Titanyl Phthalocyanine
|
|||||
AC+ |
The Role of the 5f Band and Partial Occupancy in Actinide L3-edge XANES and RXES Measurements
|
Actinide Research with Hard Synchrotron Radiation
|
Lumps, Bumps and Pyrophoric Powders - Nuclear Waste Viewed in a New Light
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Isotopic Measurements of Uranium in Particles by SIMS
|
X-ray Excited Auger Transitions of Pu Compounds
|
||||||||
AS+ |
Laser Ablation Electrospray Ionization Mass Spectrometry with Ion Mobility Separation for Cell and Tissue Analysis
|
Miniature Mass Spectrometry Systems with Ambient Ionization and MS/MS Capabilities
|
The Importance of Sample Form and Surface Temperature for Analysis by Ambient Plasma Mass Spectrometry (PADI)
|
A VAMAS Interlaboratory Study for Desorption Electrospray Ionisation Mass Spectrometry (DESI MS) - Survey of the Measurement Issues
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Mass spectrometry surface analysis outside the vacuum
|
Transporting Ions from Ambient Pressure into Vacuum for Lab-based and Mobile Mass Spectrometers
|
|||||||
BI+ |
An Inductive-Capacitive Sensor for Real-time Biofilm Growth Monitoring
|
The Interplay of Electrode Materials and Biomaterials in a Catechol-Modified Chitosan-Based Sensor for Clozapine Detection
|
Characterization of an Amperometric Glucose Sensor on a Flexible Polyimide Substrate for Continuous Glucose Monitoring and Insulin Delivery through Single Device
|
Chemically Modifying Graphene for Biosensing and Interfacing with Biology
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Bioresorbable Sensors and Electronics
|
Surface Chemistry Enhanced Microbial Bioelectrocatalysis
|
|||||||
EM-TuM |
Cu/ULK ULSI On-Chip Wiring Technologies, and Related Devices
|
Selectivity Characterization and Enhancement of Metal-Organic Chemical Vapor Deposited (MOCVD) Selective Cobalt Cap for Advanced Back End of Line
|
Precise Control of the Residual Stress Levels in Polycrystalline Thin Films for Advanced Interconnects and N/MEMS Applications
|
CVD Mn-based Barrier for Advanced Copper Interconnect Technology: Integration Study
|
Cryogenic Etching vs P4 Approaches: Paths towards Ultra-low Damage Integration of Mesoporous Oxide Dielectric Materials
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Reliability of Advanced Interconnects
|
Metal Resistivity Below 10 nm
|
||||||
EN+ |
Unraveling Thermodynamic and Kinetic Factors in Solar-Thermochemical Fuel Production
|
Controlling Catalysis on Metal Nanoparticles by Direct Photoexcitation of Adsorbate-Metal Bonds
|
Atomistic Insights as the the pH Dependence of Onset Potential of the Oxygen Evolution Reaction on Hematite
|
Rational Design of Pt3Ni Alloy Surface Structures for Oxygen Reduction
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Molecular and Mesoscale Design for Organic and Hybrid Thermoelectrics
|
Advances in Solid-State Energy Harvesting from Asymmetric Thermoelectric Devices
|
The Effect of Particle Size and Surface Termination of n-Si on Thermal and Electrical Conductivity
|
||||||
EW-TuM |
High Speed Water Vapor Cryopumps: Increasing Tool Throughput and Process Yield with Polycold PFC and MaxCool Products
|
Stylus Profilometry – Bruker’s DektakXTL delivers Innovation in Flexibility and Ease of Use
|
||||||||||||
IS+ |
The ISISS Facility at BESSY II and Beyond: The Application of Near Ambient Pressure X-ray Electron Spectroscopy in the Surface Characterization of Technical Catalysts
|
Recent Trends and Instrument Development in Ambient Pressure Photoelectron Spectroscopy
|
In Situ Studies of Exceptionally Active Catalyst of Earth Abundant Elements for Complete Combustion of Methane at a Relatively Low Temperature
|
Ambient Pressure XPS Studies of Fuel Cell and Electrolysis Catalysis
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Environmental Cells with 2D Electron Transparent Windows for Ambient Pressure Photoelectron Imaging and Spectroscopy
|
The Effect of Interfacial Ethanol on Ionic Distributions in Aqueous Solution
|
Studying Zeolites and Clays with the Tools of Surface Science from UHV to Near-Ambient Pressures
|
||||||
MI+ |
Combinatorial Approach to Novel Functional Materials
|
Discovery and Design of Two-Dimensional Materials by Data-Mining and Genetic Algorithm Approaches
|
Complexities in the Molecular Spin Crossover Transition
|
Controlling and Imprinting Topological Spin Textures
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Growth and Properties of Skyrmionic MnSi Nanowires and Thin Film on Silicon
|
Depth Dependent Mapping of Valence and Other Factors in LaSrMnO3/PrZrTiO3 Magnetoelectric Heterostructures
|
Strain Measurements in LaSrMnO3/PbZrTiO3 Magnetoelectric Heterostructures
|
Bit-Patterned Media Using Block Copolymer Templating on FePt
|
|||||
NS+ |
Nanoetching and Characterization Towards sub-5 nm Patterning
|
Cut Patterning Challenges for the 14nm-Node and Beyond
|
Nanopore Memristors: Sub-10nm Devices Built on Membranes Milled with a Helium Ion Microscope
|
Characterization of Cluster-Based High-Resolution Inorganic Resists
|
Development Characteristics of PMMA in Alternative Alcohol:Water Mixtures
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Room Temperature Electron Beam Assisted Oxygen Purification of Electron Beam Induced Pt Deposits: Towards Pure and High-Fidelity Nanostructures
|
Prospects for Nanofabrication using the Combination of STM-based Depassivation Lithography, Selective ALD, and Material Etch Processes
|
||||||
PS-TuM |
Directed Irradiation Synthesis: Manipulating Matter in Nanoscale Self-Organized Systems
|
Contact Resistance Degradation Caused By Plasma Charging of Silicon on Insulator During Contact Etch
|
3D Modeling of SiN Etching by Hydrofluorocarbon Plasma
|
Study of Plasma-Surface Interaction in HBr/Cl2/O2 ICP
|
Experimental Evaluation of Ta Film Etching Characteristics by CO+ Ion Irradiation
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Study of Hydrofluorocarbon Precursor Parameters for Plasma Etching of ULK Dielectric
|
Characteristics of Reactive Ion Etching Processes for ITO and ZnO
|
Selective Etch and Functionalization of Coblock Polymers
|
Dry Etch Process Development for PMMA Removal Selectively to PS for sub-10nm Patterning
|
||||
SA-TuM |
Analysis and Speciation of Nanoscaled Materials by Means of Grazing-Incidence and High-Resolution X-ray Spectrometry
|
X-Ray Photoemission Spectromicroscopy: Recent Achievements and Future Applications
|
Growth and Characterization of Low Dimensional Materials for Applications in Energy and Sensor Devices
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Novel 2D Electron Gases at the Surface of Transition-Metal Oxides: Role of Topology and Spin-Orbit Coupling
|
Effects of Interfacial Interaction: Electronic Structure of Graphene on Metallic and Insulating Surfaces
|
||||||||
SE+ |
Electrostatic Coating with Ligandless Copper Nanoparticles
|
Electrically Stable Pt-ZrB2 Nanocomposite Thin Films for High Temperature Applications
|
A Novel Reactive Plasma-Assisted Coating Technique (RePAC) for Thin BN/Crystalline-Si Structures and their Mechanical and Electrical Properties
|
Multifunctional Protective Coatings for Aerospace Applications
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Hard Coatings with Designed Thermal Conductivity
|
Microstructure and Hardness Gradients in Sputtered CrN Films
|
Development of Low Friction Nanocomposite Coatings for Diesel Engine Piston Rings
|
||||||
SS+ |
Coexisting Accessible Surface Phases on BaTiO3 (001)
|
Oxidation and Chemical Reactivity of TbOx Thin Films on Pt(111)
|
Structure/Function Relationships on Cerium Oxide: Reactions on Single Crystal Films and Shape-Selected Nanocrystals
|
Ceria on Cu(110): Formation of Nanostripe Strain Defects
|
Design Rules for Stabilizing Polar Metal Oxide Surfaces: Adsorption of O2 on Zn-rich Polar ZnO(0001)
|
BREAK - Complimentary Coffee in Exhibit Hall
|
The Growth of Catalytic Thin Films on a Polar Substrate: Cr2O3 on ZnO (0001) and ZnO (000-1)
|
Chemical Characterization of Elements in Oxides using X-ray Satellite Lines
|
In Situ XPS and NRA Studies of Hydrogen Diffusion in TiO2 Single Crystals
|
|||||
TF+ |
Atomic Layer Deposition: A New Strategy to Improve Metal Corrosion Resistance?
|
Atomic Layer Deposition of Thin VO2 Films for Thermal Management Applications
|
Atomic Layer Deposition of Pb(ZrXTi1-X)O3 Thin Films to Engineer Nanoscale Multiferroic Composites
|
Atomic Layer Deposition Enabled Synthesis of Nanoscale Multiferroics
|
Laser Assisted Electron Beam Induced Deposition: Towards a Nanoscale Atomic Layer Deposition Process
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Effect of Film Stress on the Shape of Nanostructures Grown Using Atomic Layer Deposition
|
Atomic Layer Deposition and Nucleation on Metallic Nanostructures for Plasmonic Devices
|
Infrared and Thermoelectric Power Generation in Thin Atomic Layer Deposited Films
|
Atomic Layer Deposition of Tin Doped Titanium Oxide on Type-V Titanium Implant Surface for Enhanced Photoactivated Antibacterial Property
|
||||
TF+ |
Investigations on LiMnxNiyO Thin Films Deposited by RF Sputtering using Powder Target for Thin Film Battery Applications
|
The Dynamics of Reactive Foil Ignition after Pulsed Laser Irradiation
|
Probing Rapid Formation and Oxidation Reactions with Multilayer Films and Foils
|
Detonation in Vapor-deposited Explosive Films at the Micro-scale
|
Investigating the Effect of Heating Rate on the Al/Ni Formation Reaction using In Situ Nanocalorimetry
|
BREAK - Complimentary Coffee in Exhibit Hall
|
The Role of Magnesium in Heat Generation from Al-Mg/Zr Laminate Foils
|
Dynamics of the Inverse MAPLE Process for Deposition of Nanoparticles and Nanoporous Thin Films
|
Structural, Optical and Electrical Properties of Fe-doped BiOCl
|
Cathodoluminescent and Photoluminescent Properties of Sr2SiO4:Dy3+ Thin Films Prepared by the Sol-gel Spin Coating Technique
|
||||
VT-TuM |
A Fast Numerical Method for Determining the Pressure Distribution in Electrostatic Chucks
|
Numerical Simulation of a Jet Disrupter in an Electrospray RF Ion Funnel
|
Gas Dynamics Modelling Efforts at CERN
|
Mixture Flow of Rarefied Gases through a Thin Orifice Over the Whole Range of Gas Rarefaction
|
Numerical Modeling of Particle Transport in Rarefied Flow
|
BREAK - Complimentary Coffee in Exhibit Hall
|
Improving the Performances of Getter Pumps: Recent Developments in NEG Technology
|
Advanced High Speed Water Vapor Cryopumps: Enabling Today’s Vacuum Processes
|